ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
化工社オープンプロジェクト：[email protected]AIアクセス：llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.7.8
戻る
化工社化工社 化学情報印刷レポート · 研究参考用
HCID 12974作成日：2026年10月27日

ジメタクリル酸無水物

二メタクリル酸無水物 · 無水メタクリル酸 · ジ(メタクリル酸)無水物 · ビス(メタクリル酸)無水物 · ジメタクリル酸無水物 · ビスメタクリル酸無水物 · メタクリル酸水物 · メタクリル酸無水物

https://huagongshe.com/ja/chemical/12974

ジメタクリル酸無水物 の分子構造式

識別子と物理属性

CAS No.760-93-0
分子式C8H10O3
平均分子量154.16 g/mol
単同位体質量154.06299418 g/mol
SMILESC=C(C)C(=O)OC(=O)C(=C)C
InChIKeyDCUFMVPCXCSVNP-UHFFFAOYSA-N
PubChem CID12974
EC No.212-084-8
DTXSIDDTXSID60862404
現地名ジメタクリル酸無水物

化学・物理的性質

XLogP1.8
極性表面積43.4
水素結合供与体数0
水素結合受容体数3
回転可能結合数4
重原子数11
形式電荷0
複雑度201
物質分類Other Classes -> Acid Anhydrides, Other
SpringerMaterials PropertiesOptical coefficient
密度Specific gravity: 1.0351.035 @25 °C1.04 g/mL at 20 °C
Viscosity3 mPa
溶解度> 10% in ether> 10% in ethanolエタノールおよびエーテルと混和します。98g/L at 20℃
沸点192 °F at 5 mmHg (EPA, 1998)89 °C at 5 mm Hg240 °C @760 [mm Hg]87 °C13 mm Hg(lit.)
DecompositionWhen heated to decomposition it emits acrid smoke and irritating fumes.
蒸気圧8.83 [mmHg]0.01 [mm Hg] @25 °C90Pa at 20℃
屈折率Index of refraction: 1.4540 @ 20 °CIndex of refraction: 1.453 at 25 °C/Dn20/D 1.453(lit.)
Physical DescriptionMethacrylic anhydride is a liquid. (EPA, 1998)[CAMEO] Colorless liquid[MSDSonline]
融点-20°C
引火点184 °F
貯蔵条件under inert gas (nitrogen or Argon) at 2-8°C
外観・状態clear liquid
色Colorless to Light yellow to Light orange
BRN1761982
安定性安定。可燃性。湿気に敏感。
InChI1S/C8H10O3/c1-5(2)7(9)11-8(10)6(3)4/h1,3H2,2,4H3
InChIKeyDCUFMVPCXCSVNP-UHFFFAOYSA-N
SMILESCC(=C)C(=O)OC(=O)C(C)=C
LogP（分配係数）1.23
CAS データベース760-93-0(CAS DataBase Reference)
NISTの化学物質情報Methacrylic anhydride(760-93-0)
EPAの化学物質情報Methacrylic anhydride (760-93-0)

化学的特性

Methacrylic anhydride is a colorless transparent liquid which reacts with water exothermically. It can also react with hydroxyl- and amino-groups present in some organic compounds leading to covalent attachment of methacryloyl moieties.

安全性と法規制

GHS 分類This chemical does not meet GHS hazard criteria for 2.7% (5 of 184) of reports.DangerH302+H332 (57.6%): Harmful if swallowed or if inhaled [Warning Acute toxicity, oralacute toxicity, inhalation]P261, P264, P264+P265, P270, P271, P272, P280, P301+P317, P302+P352, P304+P340, P305+P354+P338, P316, P317, P319, P321, P330, P332+P317, P333+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 184 reports by companies from 14 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
規制情報2-Propenoic acid, 2-methyl-, 1,1'-anhydride is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Propenoic acid, 2-methyl-, 1,1'-anhydride are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 28-04-2023 https://echa.europa.eu/registration-dossier/-/registered-dossier/52772-Propenoic acid, 2-methyl-, anhydride: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right.The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)
輸送ラベル（DOT）Corrosive
火災危険(Non-Specific -- Methacrylic Acid) This material may burn but may not ignite readily. Flammable/ poisonous gases may accumulate in tanks and hopper cars. Some of these materials may ignite combustibles (wood, paper, oil, etc.). (EPA, 1998)
健康有害性Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
有害性の概要Reacts with water exothermically producing methacrylic acid[CAMEO] A corrosive substance that can cause injury to the skin, eyes, and respiratory tractInhalation may cause chemical pneumonitisMay cause skin sensitization[MSDSonline]
反応性グループHydrocarbons, Aliphatic Unsaturated

用途

説明

Methacrylic anhydride is a reactive monomer used primarily as a monomer in the preparation of polymers, particularly poly(methacrylic acid) and its copolymers. The reaction mechanism involves the formation of covalent bonds between methacrylic acid and acetic anhydride molecules, resulting in the formation of a novel compound. The newly formed compound then undergoes a series of reactions including hydrolysis and polymerisation. Methacrylic anhydride produces polymers with good chemical and thermal stability, which are used in a wide range of applications in various industries such as bio-renewable resins, pH-sensitive hydrogels, thermoset plastics, coatings, adhesives and plastics.

使用

Methacrylic anhydride is a reactive monomer used for the preparation of different type of monomers under mild reaction conditions. It finds applications in light-curing coatings, cross-linked materials like synthetic resin. It acts as an intermediate for the preparation of fibers and resins.

一般的な説明

Liquid.

製法・合成法

製造方法

To synthesize Methacrylic anhydride, sodium methacrylate (1 mol), propionyl chloride (3 mol), and a polymerization inhibitor (0.1 mol) were added to a reaction kettle. The mixture was heated to 90-100 ℃ and refluxed for 8 hours. Methacrylic anhydride was then obtained by distilling and collecting fractions at 100-105 ℃. The yield of the product was 98.33%.

純化方法

Distil the anhydride at 2mm pressure, immediately before use, in the presence of hydroquinone. [Beilstein 2 IV 1537.]

Reactivity AlertsWater-Reactive
Reactivity ProfileMETHACRYLIC ANHYDRIDE reacts exothermically with water. The reactions are sometimes slow, but can become violent when local heating accelerates their rate. Acids accelerate the reaction with water. Incompatible with acids, strong oxidizing agents, alcohols, amines, and bases.
Air and Water ReactionsReacts exothermically with water to form methacrylic acid.
CERCLA 報告数量Releases of CERCLA hazardous substances are subject to the release reporting requirement of CERCLA section 103, codified at 40 CFR part 302, in addition to the requirements of 40 CFR part 355. Methacrylic anhydride is an extremely hazardous substance (EHS) subject to reporting requirements when stored in amounts in excess of its threshold planning quantity (TPQ) of 500 lbs.
Hazard Classes and CategoriesAcute Tox. 4 (71.7%)
Skin, Eye, and Respiratory IrritationsMethacrylates ... produce slight to moderate skin and eye irritation ... depending upon volatility, these materials also may be sensory irritants. /Methacrylic acid & derivatives/
消火(Non-Specific -- Methacrylic Acid) Keep unnecessary people awayisolate hazard area and deny entry. Stay upwindkeep out of low areas. Wear self-contained (positive pressure if available) breathing apparatus and full protective clothing.
応急処置Note: No information on specific clinical effects of exposure was available.
保管条件Temp during storage must be kept low to minimize formation of peroxides and other oxidation products. ... Storage temp below 30 °C are recommended for the polyfunctional methacrylates. ... The methacrylate monomers should not be stored for longer than one year. Shorter storage times are recommended for the aminomethacrylates, ie, three months, and the polyfunctional methacrylates, ie, six months. Many of these cmpd are sensitive to UV light and should, therefore, be stored in the dark. The methacrylic esters may be stored in mild steel, stainless steel, or aluminum. /Methacrylic acid & derivatives/
非火災時の漏出対応(Non-Specific -- Methacrylic Acid) Do not touch spilled materialstop leak if you can do so without risk. For small spills, absorb with sand or other noncombustible absorbent material and place into containers for later disposal. For large spills, dike far ahead of spill for later disposal. (EPA, 1998)
処分方法SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
Preventive Measures... Hazard is the generation of considerable exothermic heat in some of the reactions, so that high pressures & temp may develop. This danger ... should be borne in mind when designing plant. Awareness of the dangers and of good engineering design are essential to safety. Employees should be instructed about the necessity of cleansing the skin if it is contaminated by materials which are irritants or skin-absorbed. With careful design, however, and complete enclosure of those processes where toxic chemicals or intermediates occur, dangerous exposures can be avoided. /Acrylic acid & derivatives/SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.
Isolation and EvacuationExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
Protective Action Criteria (PAC)0.41 [mg/m3]4.5 [mg/m3]16 [mg/m3]
Personal Protective Equipment (PPE)For emergency situations, wear a positive pressure, pressure-demand, full facepiece self-contained breathing apparatus (SCBA) or pressure- demand supplied air respirator with escape SCBA and a fully-encapsulating, chemical resistant suit. (EPA, 1998)SUITABLE PROTECTIVE CLOTHING & SELF-CONTAINED RESP PROTECTIVE APPARATUS SHOULD BE AVAILABLE FOR USE OF THOSE WHO MAY HAVE TO RESCUE PERSONS OVERCOME BY FUMES. /ACRYLIC ACID & DERIVATIVES/
有害作用Dermatotoxin - Skin burns.
Antidote and Emergency TreatmentBasic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist respirations if necessary. Administer oxygen by nonrebreather mask at lO to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Activated charcoal is not effective ... . Do not attempt to neutralize because of exothermic reaction. Cover skin burns with dry, sterile dressings after decontamination ... . /Organic acids and related compounds/Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in respiratory arrest. Early intubation, at the first sign of upper airway obstruction, may be necessary. Positive-pressure ventilation techniques with a bag-valve-mask device may be beneficial. Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start an IV with D5W TKO /SRP: "To keep open", minimal flow rate/. Use lactated Ringer's if signs of hypovolemia are present. Watch for signs of fluid overload. Consider drug therapy for pulmonary edema ... . For hypotension with signs of hypovolemia, administer fluid cautiously. Consider vasopressors if hypotensive with a normal fluid volume. Watch for signs of fluid overload ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Organic acids and related compounds/
Toxicity DataLC50 (mice) = 450 mg/m3/2h
Non-Human Toxicity ValuesLC50 Mouse ihl 450 mg/cu m/2 hr
F10-21
水環境危害等級（WGK）1
TSCA 収載状態TSCA listed
RTECS 番号OZ5700000
輸送番号（UN）UN 3265 8/PG 2
税関コード29161900
危険文句（R）20-37/38-41
化審法(2)-1026
消防法危-4-3-III
危険表示Xn
安全措置（S）26-39
危険等級8Acute Tox. 4 InhalationAcute Tox. 4 OralEye Dam. 1Skin Irrit. 2Skin Sens. 1STOT SE 3
包装等級II
貯蔵分類10 - Combustible liquids
有害物質データ760-93-0(Hazardous Substances Data)