ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /化合物

テトラフルオロ硫黄(IV)

Sulfur tetrafluoride

HCID 24555
反応を作成
印刷
基本情報概要名称と識別子物性安全と法規制化学と産業関連反応化合物ノート
部分構造検索類似構造を探す

基本情報

CAS
7783-60-0
標準SMILES
FS(F)(F)F
InChIKey
QHMQWEPBXSHHLH-UHFFFAOYSA-N
分子式
F4S
平均分子量
108.06 g/mol
単同位体質量
107.96568382

概要

Sulfur tetrafluoride is a colorless gas with a distinct sulfur odor. It is highly toxic by inhalation and a strong irritant to skin, eyes and mucous membranes. It reacts vigorously with water and acids to yield toxic fluoride and sulfur oxide fumes and an acidic solution. Sulfur tetrafluoride is heavier than air. Under prolonged exposure to fire or intense heat the containers may violently rupture or rocket. It is used as a fluoridizing agent and as an oil repellent.

名称と識別子

優先名称
Sulfur tetrafluoride
IUPAC
tetrafluoro-λ4-sulfane
現地名
テトラフルオロ硫黄(IV)
英語名
Sulfur tetrafluoride
分子式
F4S
分子量
108.06

名称と別名

SULFUR TETRAFLUORIDE7783-60-0TetrafluorosulfuraneSulphur tetrafluorideSulfur fluoride (SF4), (T-4)-Sulfur fluoride (SF4)UN2418F4P8J39GOFSulfur fluoride (SF4), (beta-4)-CHEBI:30495DTXSID40893074UN-2418
名称をさらに表示
四ふっ化硫黄硫黄(IV)テトラフルオリドふっ化硫黄(IV)テトラフルオロ硫黄(IV)四フッ化イオウ(3S)-6β-(トリフルオロアセチルアミノ)-4α,5α-ジヒドロキシピペリジン-3α-カルボン酸(3S,4S,5R,6R)-4,5-ジヒドロキシ-6-(2,2,2-トリフルオロアセトアミド)ピペリジン-3-カルボン酸(3S)-4α,5α-ジヒドロキシ-6β-(トリフルオロアセチルアミノ)ピペリジン-3α-カルボン酸(3S,4S,5R,6R)-6-[(トリフルオロアセチル)アミノ]-4,5-ジヒドロキシピペリジン-3-カルボン酸(3S,4S,5R,6R)-6-[(トリフルオロアセチル)アミノ]-4,5-ジヒドロキシ-3-ピペリジンカルボン酸SF4sulfur fluorideSulfur(4+) fluorideSchwefeltetrafluorid
RefChem:186629DTXCID301323028232-013-4tetrafluoro-lambda4-sulfanetetrafluoridosulfurSulfur fluoride, (T-4)-tetrafluoro--sulfanesulfur(IV) fluoride

物性

構造計算による物性

XLogP
3.1
極性表面積
1 Ų
水素結合供与体数
0
水素結合受容体数
5
回転可能結合数
0
重原子数
5
形式電荷
0
複雑度
19.1

実験および物理化学的性質

Chemical Classes · 2 件

Toxic Gases & Vapors -> Corrosive Gases

Corrosives

SpringerMaterials PropertiesGibbs energy
Odor · 2 件

Irritating odor that resembles sulfur dioxide

Distinct sulfur odor

Density · 5 件

1.95 at -108 °F (EPA, 1998) - Denser than water; will sink

Liquid at -78 °C: 1.95 g/mL; solid at -183 °C: 2.349 g/mL

1.95 at -108 °F

1.95 @ -78°C

3.78(relative gas density)

Color/FormColorless gas
Solubility · 4 件

Reacts with water (NIOSH, 2024)

Freely sol in benzene

Solubility in water: reaction

Reacts

Corrosivity · 3 件

Attacks glass, but not quartz or mercury

.. its corrosive action on metals can result in formation of hydrogen in containers & piping to create fire hazard

Attacks glass and metal

Boiling Point · 6 件

-40 °F at 760 mmHg (EPA, 1998)

-38 °C

-40 °C

安全と法規制

安全情報は参考情報です。供給元の安全データシート(SDS)、適用法令、専門家による評価に代わるものではありません。

GHS分類

GHS Classification · 6 件

Danger

H280 (100%): Contains gas under pressure; may explode if heated [Warning Gases under pressure]

P260, P261, P264, P271, P280, P284, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P319, P320, P321, P363, P403+P233, P405, P410+P403, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 111 reports by companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

H280: Contains gas under pressure; may explode if heated [Warning Gases under pressure]

危険有害性情報

Hazards IdentificationToxic/poison by inhalation (TIH/PIH)
Regulatory Information · 3 件

Chemical: Sulfur fluoride (SF4), (T-4)-

REACH registered substance: Sulphur tetrafluoride (EC: 232-013-4)

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelPoison Gas Corrosive
Fire Hazards · 3 件

Container may explode in heat of fire. When heated to decomposition, it emits very toxic fumes of fluorides and sulfur oxides. Reacts violently with water. It is decomposed by concentrated sulfuric acid. Thermostable to 1112F. (EPA, 1998)

· Some may burn but none ignite readily.

Gives off irritating or toxic fumes (or gases) in a fire. Not combustible.

Health Hazards · 2 件

This material is highly toxic by inhalation; it is a strong irritant to eyes and mucous membranes. Poisonous; may be fatal if inhaled. Contact may cause burns to skin and eyes. Contact with liquid may cause frostbite. (EPA, 1998)

化学と産業

薬理情報

Metabolism/MetabolitesIn view of the violent reaction of the compound with water to hydrogen fluoride and thionyl fluoride, exposure to the compound itself will have a local character only. Thionyl fluoride hydrolyzes more slowly than its parent.
Absorption, Distribution and Excretion · 1 件

A study /was conducted/ to determine the absorption of inhaled hydrofluoric acid. Two human subjects were exposed for an 8 hour period in an industrial environment to fluorides consisting primarily of hydrogen fluoride and silicon tetrafluoride at an average airborne concentration of 3.8 mg F/cu m. Urine specimens were collected at 2 hour intervals during exposure and or approximately 2 days afterwards. There was a rapid rise in urinary fluoride excretion during exposure, and a peak output was reached in 2-4 hours after cessation of exposure. Within 24 hours, the urinary fluoride levels returned practically to base levels, although a slight elevation persisted into the following day. The total amounts of fluoride excreted daily by the two subjects were as follows: day of exposure, 9.64 and 8.56 mg fluoride; first day after exposure, 1.67 and 2.49; second day, 0.99 and 1.31; and third day, 0.89 and 1.34. The baseline daily urinary fluoride excretions before exposure were 0.9 and 1.2 mg fluoride, respectively. /Hydrofluoric acid/

用途と製造

Uses · 6 件

Used as a fluorine donor in chemical reactions to produce water-repellant materials, pesticides, and other organic and inorganic compounds; [ACGIH]

Sulfur tetrafluoride ... can be used for the controlled introduction of fluorine into organic compounds.

Selective fluorinating agent.

Fluorinating agent for making water and oil repellants and lubricity improvers.

Sulfur tetrafluoride is also quite useful for converting metal oxides into fluorides.

For more Uses (Complete) data for SULFUR TETRAFLUORIDE (8 total), please visit the HSDB record page.

Methods of Manufacturing · 3 件

/Commercial production:/ Direct combination of sulfur with elemental fluorine.

関連反応

25 件
反応記録を作成
HRID 5776 の反応式
HRID 5776反応物として
HRID 178344 の反応式
HRID 178344反応物として
HRID 194643 の反応式
HRID 194643反応物として
HRID 198087 の反応式
HRID 198087反応物として
HRID 434762 の反応式
HRID 434762反応物として
HRID 484782 の反応式
HRID 484782反応物として
HRID 616884 の反応式
HRID 616884反応物として
HRID 637765 の反応式
HRID 637765反応物として
前へ1 / 4 ページ

化合物ノート

このページの内容基本情報概要名称と識別子物性安全と法規制化学と産業関連反応化合物ノート

データベース識別子

CAS
7783-60-0
PubChem CID
24555
DTXSID
DTXSID40893074
ChEBI
CHEBI:30495
UNII
F4P8J39GOF
EC Number
232-013-4
Nikkaji
J95.217F

-41 °F

-38 °C @760 [mm Hg]

-41 °F

DecompositionWhen heated it emits very toxic fumes of /hydrogen fluoride and sulfur oxides/.
Melting Point · 6 件

-191 °F (EPA, 1998)

-121.0 °C

-124 °C

-185 °F

-121 °C

-185 °F

Vapor Density · 4 件

3.78 (NIOSH, 2024) - Heavier than air; will sink (Relative to Air)

3.78 (Air = 1)

Relative vapor density (air = 1): 3.78

3.78

Odor ThresholdLow threshold= 0.033 mg/cu m High threshold= 0.13 mg/cu m. Irritating concn= 4.17 mg/cu m. /Hydrofluoric acid/

物理化学的性質

融点
121.5 · −121.5-−120.5 °C(lit.)
沸点
40.4 °C · −40.4 °C(lit.)
比重(密度)
1.941 · 1.941
蒸気圧
140 psi · 140 psi ( 21 °C)
溶解性
2 O · reacts with H2O
外見
無色のガス
色
colorless
水溶解度
2 O · H2O で分解 [HAW93]
比熱容量
0.72 J/ · Cp(gas): 0.72 J/(g·K), at 25℃
Merck
13 · 13,9068
InChI
InChI=1S/F4S/c1-5(2,3)4
InChIKey
QHMQWEPBXSHHLH-UHFFFAOYSA-N
SMILES
FS(F)(F)F
CAS データベース
7783 · 7783-60-0(CAS DataBase Reference)
NISTの化学物質情報
Sulfur tetrafluoride(7783-60-0)
EPAの化学物質情報
Sulfur tetrafluoride (7783-60-0)

化学的性質

化学的特性Sulfur tetrafluoride is a colorless gas with an odor like sulfur dioxide. Shipped as a liquefied compressed gas.

· TOXIC and/or CORROSIVE; may be fatal if inhaled, ingested or absorbed through skin.

Hazards Summary · 1 件

May cause skin burns (from SF4 releasing hydrofluoric acid on exposure to moisture); [NIOSH] After an industrial accident, six exposed workers developed cough, dyspnea, and chest tightness. Symptoms resolved within one to four weeks. [ACGIH] Possible frostbite from contact with liquid; [NIOSH] A corrosive substance that can cause pulmonary edema; Evaporating liquid can cause frostbite; May cause fluorosis; [ICSC] See FLUORIDES.

DOT ID and Guide · 2 件

2418 125

2418 125

Reactive GroupFluoride Salts, Soluble
UN ClassificationUN Hazard Class: 2.3; UN Subsidiary Risks: 8
Reactivity AlertsWater-Reactive
Reactivity Profile · 1 件

SULFUR TETRAFLUORIDE is a highly toxic and corrosive gas. On contact with water, steam, or mineral acids it decomposes and produces toxic and highly irritating fumes. When heated to decomposition it emits very toxic fluoride and sulfur oxides fumes [Lewis, 3rd ed., 1993, p. 1197]. Explosively violent reactions with 2-(hydroxymethyl)furan or 2-methyl-3-butyn-2-ol even below -50 °C have been recorded [Bretherick, 5th ed., 1995, p. 1432]. Ignition or explosion may occur on contact with dioxygen difluoride even below -100 °C [Streng, A. G., Chem. Rev., 1963, 63, p. 615].

Chemical DangersReacts violently with water and acids. This produces toxic and corrosive fumes. Attacks glass and metal.

安全と保護具

Fire Fighting · 2 件

Keep unnecessary people away; isolate hazard area and deny entry. Stay upwind; keep out of low areas. Ventilate closed spaces before entering them. Wear positive pressure breathing apparatus and full protective clothing. Evacuate area endangered by gas.

NO water. In case of fire in the surroundings, use appropriate extinguishing media. In case of fire: keep cylinder cool by spraying with water. NO direct contact with water.

First Aid Measures · 3 件

Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.

ON FROSTBITE: rinse with plenty of water, do NOT remove clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Accidental Release Measures · 2 件

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· Do not touch or walk through spilled material.

First Aid · 3 件

Warning: Sulfur tetrafluoride is a highly irritating and corrosive gas.

General First Aid:

(General first aid procedures)

Safe StorageKeep in a well-ventilated room. Fireproof if in building. Cool. Dry.
Firefighting HazardsSulphur oxides, Hydrogen fluoride
Exposure Control and Personal Protection · 2 件

· Wear positive pressure self-contained breathing apparatus (SCBA).

TIH (Toxic Inhalation Hazard) - Term used to describe gases and volatile liquids that are toxic when inhaled. Some are TIH materials themselves, e.g., chlorine, and some release TIH gases when spilled in water, e.g., chlorosilanes. [ERG 2016].

Fire Fighting Procedures · 3 件

Wear self-contained breathing apparatus for firefighting if necessary.

Dry powder

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty). Do not use water. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use "alcohol" foam, dry chemical or carbon dioxide. Do not apply water to point of leak in tank car or container.

Storage Conditions · 2 件

Hydrogen fluoride should be stored in cool, dry, well ventilated areas out of the direct rays of the sun. /Hydrofluoric acid/

Keep container tightly closed in a dry and well-ventilated place. Never allow product to get in contact with water during storage. Contents under pressure. Storage class (TRGS 510): Gases

Cleanup Methods · 1 件

/ACCIDENTAL RELEASE MEASURES/ Personal precautions, protective equipment and emergency procedures: Wear respiratory protection. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Methods and materials for containment and cleaning up: Do not flush with water.

Nonfire Spill ResponseExcerpt from ERG Guide 125 [Gases - Toxic and/or Corrosive]:
Disposal Methods · 2 件

SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.

Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging: Dispose of as unused product.

毒性情報

Target OrgansEyes, skin, respiratory system
Environmental Fate · 3 件

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 27(SRC), determined from a structure estimation method(2), indicates that sulfur tetrafluoride is expected to have very high mobility in soil(SRC). Volatilization of sulfur tetrafluoride from moist soil surfaces would be expected to be an important fate process(SRC) given the compound is a gas with a vapor pressure of 1.52X10+4 mm Hg at 25 °C(3). However, sulfur tetrafluoride reacts rapidly with water(3); therefore, rapid hydrolysis will attenuate the importance of volatilization from moist soil and leaching(SRC). Sulfur tetrafluoride is expected to volatilize from dry soil surfaces based upon its vapor pressure(SRC). Biodegradation data were not available(SRC, 2015).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 27(SRC), determined from a structure estimation method(2), indicates that sulfur tetrafluoride is not expected to adsorb to suspended solids and sediment(SRC). Sulfur tetrafluoride reacts rapidly with water to yield hydrofluoric acid and thionyl fluoride(3). Therefore, volatilization from water and biocentration are not expected to be an important fate processes(SRC). Biodegradation data were not available(SRC, 2015).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), sulfur tetrafluoride, which has a vapor pressure of 1.52X10+4 mm Hg at 25 °C(2), is expected to exist solely as a gas in the ambient atmosphere. Sulfur tetrafluoride is a relatively heavy gas with a vapor density 3.78 times that of air(3). Therefore, if released in the atmosphere, it may tend to remain close to the ground and be transported to earth by wet deposition(SRC). Sulfur tetrafluoride reacts rapidly with water to yield hydrofluoric acid and thionyl fluoride(2). It also reacts and fumes in moist air(2). Therefore, hydrolysis is expected to be an important fate process in the ambient atmosphere(SRC).

Adverse EffectsDermatotoxin - Skin burns.
Exposure Routes · 2 件

The substance can be absorbed into the body by inhalation.

inhalation, skin and/or eye contact

Toxicity Summary · 1 件

IDENTIFICATION AND USE: Sulfur tetrafluoride (SF4) is a colorless gas. It is used as a selective fluorinating agent, capable of replacing oxygen in many organic, inorganic, and organometallic compounds with fluorine. It is also used in the production of water- and oil-repellant materials and lubricity improvers. HUMAN EXPOSURE AND TOXICITY: SF4 exerts severe local effects upon inhalation at rather low exposure levels, most probably due to respiratory tract irritation. Eye-irritating properties are suggested by a case study, in which workers were exposed to the breakdown products of sulphur hexafluoride. ANIMAL STUDIES: Local effects in the respiratory tract were found in a rat study at 4 ppm (18 mg/cu m).

Signs and Symptoms · 4 件

Burning sensation. Cough. Sore throat. Headache. Nausea. Vomiting. Shortness of breath. Laboured breathing. Symptoms may be delayed.

Pain. Redness. Skin burns. ON CONTACT WITH LIQUID: FROSTBITE.

Redness. Pain. Blurred vision. Severe deep burns. ON CONTACT WITH LIQUID: FROSTBITE.

irritation eyes, skin, mucous membrane; eye, skin burns (from SF4 releasing hydrofluoric acid on exposure to moisture); liquid: frostbite; In Animals: dyspnea (breathing difficulty), lassitude (weakness, exhaustion), rhinorrhea (discharge of thin nasal mucus)

Soil Adsorption/Mobility · 1 件

Using a structure estimation method based on molecular connectivity indices(1), the Koc of sulfur tetrafluoride can be estimated to be 27(SRC). According to a classification scheme(2), this estimated Koc value suggests that sulfur tetrafluoride is expected to have very high mobility in soil. Sulfur tetrafluoride reacts rapidly with water(3), therefore, leaching in moist soils will be attenuated by hydrolysis(SRC).

Human Toxicity Excerpts · 3 件

/SIGNS AND SYMPTOMS/ ...the compound exerts severe local effects upon inhalation at rather low exposure levels, most probably due to respiratory tract irritation. Moreover, eye-irritating properties are suggested by a case study, in which workers were exposed to the breakdown products of sulphur hexafluoride.

/CASE REPORTS/ Six electrical workers accidentally exposed to degradation products of sulfur hexafluoride (SF6) during electrical repair work were followed up for one year. One degradation product, sulfur tetrafluoride (SF4), was identified from worksite measurements. Unprotected exposure in an underground enclosed space occurred for six hours over a 12 hour period. Initial symptoms included shortness of breath, chest tightness, productive cough, nose and eye irritation, headache, fatigue, nausea, and vomiting. Symptoms subsided when exposure was interrupted during attempts to identify the cause of the problem. Although exposure ended after several hours, four workers remained symptomatic for between one week and one month. Pulmonary radiographic abnormalities included several discrete areas of transitory platelike atelectasis in one worker, and a slight diffuse infiltrate in the left lower lobe of another. One worker showed transient obstructive changes in tests of pulmonary function. Examination at follow up after one year showed no persistent abnormalities.

/OTHER TOXICITY INFORMATION/ In view of the violent reaction of sulphur tetrafluoride with water, systemic exposure to this compound itself may be deemed negligible. Systemic exposure to hydrogen fluoride, sulphur dioxide, and thionyl dioxide - hydrolysis products - will, however, occur.

Artificial Pollution Sources · 1 件

Sulfur tetrafluoride's production and use as a selective fluorinating agent(1), as a treatment to increase the water repellency of polymeric materials, in the preparation of high-lubricity elastomers, and for treatment of carbon blacks to prepare improved rubber vulcanizates(2) may result in its release to the environment through various waste streams(SRC). Sulfur tetrafluoride can be formed as a degradation product of high temperature decomposition of sulfur hexafluoride(3).

Environmental BioconcentrationSulfur tetrafluoride reacts rapidly with water to yield hydrofluoric acid and thionyl fluoride(1). Therefore, bioconcentration in aquatic organisms weill not occur(SRC).
Volatilization from Water/Soil · 1 件

Sulfur tetrafluoride reacts rapidly with water to yield hydrofluoric acid and thionyl fluoride(1). Therefore, volatilization from water is not expected to be an important fate process(SRC). Sulfur tetrafluoride is a gas with vapor pressure of 1.52X10+4 mm Hg at 25 °C(1). Therefore, volatilization from moist soil surfaces would be expected to occur; however, rapid hydrolysis will attenuate the importance of volatilization from moist soil(SRC). Sulfur tetrafluoride is expected to volatilize from dry soil surfaces based upon its vapor pressure(SRC).

Non-Human Toxicity Excerpts · 2 件

/LABORATORY ANIMALS: Acute Exposure/ ... Four hours of respiratory exposure to 19 ppm ( 86 mg/cu m ) caused death in one of 2 exposed rats, while all 2 rats survived a 1-hour exposure to 40 ppm ( 180 mg/cu m ). Further, rats repeatedly exposed to 4 ppm ( 18 mg/cu m ; 4 hours/day for 10 days over a 12-day period) showed signs of 'respiratory embarrassment'. Two rats sacrificed immediately after the 10th exposure, showed pulmonary damage, while rats allowed to recover for 14 days showed no clinical and anatomical lesion.

/ALTERNATIVE and IN VITRO TESTS/ Using quadrupole mass spectrometric analysis of sparked sulfur hexafluoride over energy and pressure ranges of 4-94 kj and 40-233 kPa, respectively, the by-products include sulfur tetrafluoride. The cytotoxic activity of certain of the more abundant decomposition products (prepared as mixtures of the specified by- product SF6) toward the Chinese hamster lung cells using a colony formation assay were investigated. Sulfur fluoride exhibited no sigificant cytotoxic activity at 0.5% concentration, although concentrations of 1 and 2% showed definite cytotoxicity, particularly after 4 hr of exposure.

法規制情報

CERCLA Reportable Quantities · 1 件

Releases of CERCLA hazardous substances are subject to the release reporting requirement of CERCLA section 103, codified at 40 CFR part 302, in addition to the requirements of 40 CFR part 355. Sulfur tetrafluoride is an extremely hazardous substance (EHS) subject to reporting requirements when stored in amounts in excess of its threshold planning quantity (TPQ) of 100 lbs.

DHS Chemicals of Interest (COI) · 6 件

Sulfur tetrafluoride

1

2500

1.33

15

Toxic chemical that can be released at a facility.

安全データ

OEL
Ceiling: 0.1 ppm (0.4 mg/m3)
wgk
3
tsca
TSCA listed
rtecs
WT4800000
ridadr
UN 2418
risk_code
14-26-34-37
化審法
1-339
hazard_code
T+,C,T
hazard_note
Highly Toxic/Corrosive
safety_code
26-36/37/39-38-45
hazard_class
2.3
有毒物質データの
7783-60-0(Hazardous Substances Data)
危険度評価(NFPA 704基準/消防庁データ)
火災[赤]=0

First prepared from cobalt trifluoride and elemental sulfur.

In the laboratory, sulfur tetrafluoride is made by combining SCl2 and NaF suspended in acetonitrile at ca 77 °C.

Formulations/PreparationsGrade: Available in cylinders at 90-94% purity
General Manufacturing Information · 2 件

Sulfur fluoride (SF4), (T-4)-: ACTIVE

... Degradation products /of sulfur hexafluoride/ ... are produced when electrical arcing occurs. The specific compounds produced depend on the arcing conditions. In anaerobic and anhydrous circumstances, sulfur tetrafluoride (SF4) is produced ... .

応用分野 · 2 件

使用Compounds of interest in this group include sulfur hexafluoride (SF6) used as an electrical insulating material in circuit breakers, cables, capacitors, and transformers, and its degradation products, which are produced when electrical arcing occurs. The specific compounds produced depend on the arcing conditions. In anaerobic and anhydrous circumstances, sulfur tetrafluoride (SF4) is produced; if moisture is present, the tetrafluoride may hydrolyze to form thionyl fluoride (SOF2) and HF. Sulfuryl fluoride (SO2F2), disulfur decafluoride (S2F10), sulfur pentafluoride (SF5), and sulfur dioxide are also formed from sulfur hexafluoride. Some of these compounds are also produced as contaminants in the commercial production of sulfur hexafluoride by burning sulfur in fluorine gas, for example, sulfur tetrafluoride and disulfur decafluoride, as well as sulfur monofluoride (S2F2).

一般的な説明Sulfur tetrafluoride is a colorless gas with a distinct sulfur odor. Sulfur tetrafluoride is highly toxic by inhalation and a strong irritant to skin, eyes and mucous membranes. Sulfur tetrafluoride reacts vigorously with water and acids to yield toxic fluoride and sulfur oxide fumes and an acidic solution. Sulfur tetrafluoride is heavier than air. Under prolonged exposure to fire or intense heat the containers may violently rupture or rocket. Sulfur tetrafluoride is used as a fluoridizing agent and as an oil repellent.

上流・下流製品情報

上流原料

五フッ化イオウ

下流製品

(ジエチルアミノ)サルファートリフルオリド5-(トリフルオロメチル)チアゾール-2-アミンテトラフルオロメタンSulfur tetrachloride