ひ素トリヨージド

Metals -> Arsenic Compounds, Inorganic

Carcinogens

Orange-red, trigonal rhombohedra from acetone; aq soln is yellow

Red hexagonal crystals

6 g/100 ml water at 25 °C

5.2 g/100 ml carbon disulfide

Freely sol in chloroform, benzene, toluene, xylene; less sol in ether

1 in 42 /parts/ of alc

30 g/100 ml hot water (decomp)

Arsenic iodide is decomposed by water to form arsenic acid & hydriodic acid, a corrosive material.

When heated to decomposition it emits very toxic fumes of /iodide/ & arsenic.

DANGEROUS WHEN HEATED TO DECOMP ... IT EMITS TOXIC FUMES OF ARSENIC /SRP: INCLUDING ARSINE/. /ARSENIC CMPD/

Arsenic iodide, solid appears as orange-red rhombohedral crystals (from acetone). Density 4.69 g / cm3. Melting point 285.6 °F (140.9 °C). Red as a liquid.

Orange red solid; Oxygen form air slowly liberates iodine; [Merck Index] Red or orange powder; [MSDSonline]

Danger

H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]

P261, P264, P270, P271, P273, P301+P316, P304+P340, P316, P321, P330, P391, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 44 reports by companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Restricted substance: Arsenic triiodide

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

U.S. Environmental Protection Agency's Integrated Risk Information System (IRIS) on Arsenic, inorganic (7440-38-2).[Available from the Substance File List, as of March 15, 2000: http://www.epa.gov/iris/subst/index.html]

IARC. Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Man. Geneva: World Health Organization, International Agency for Research on Cancer, 1972-PRESENT. (Multivolume work). Volume 84 (2004). Some Drinking-water Disinfectants and Contaminants, including Arsenic.[Available from, as of July 22, 2009: http://monographs.iarc.fr/ENG/Monographs/vol84/volume84.pdf]

National Toxicology Program. Eleventh Report on Carcinogens (2005). The Report on Carcinogens is an informational scientific and public health document that identifies and discusses substances (including agents, mixtures, or exposure circumstances) that may pose a carcinogenic hazard to human health. Inorganic Arsenic Compounds are listed as known to be human carcinogens. /Arsenic Compounds, Inorganic/[Available from, as of July 31, 2009: http://ntp.niehs.nih.gov/ntp/roc/eleventh/profiles/s015arse.pdf]

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. /Arsenical cmpd, liquid, NOS/

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. /Arsenical cmpd, solid, NOS/

8 hr Time-Weighted avg: 10 ug/cu m./Arsenic, inorganic cmpd (as As)/

Permissible Exposure Limit: Table Z-1 8-Hr Time Weighted Avg: 0.5 mg/cu m. /Arsenic, organic cmpd (as As)/

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Arsenic triiodide is included on this list.

(a) The owner or operator of an existing glass melting furnace subject to the provisions of this subpart shall comply with either paragraph (a)(1) or (a)(2) of this section ... (1) Uncontrolled total arsenic emissions from the glass melting furnace shall be less than 2.5 Mg (2.7 ton) per year, or ... (2) Total arsenic emissions from glass melting furnace shall be conveyed to a control device and reduced by at least 85%. /Total arsenic/

(b) The owner or operator of a new or modified glass melting furnace subject to the provisions of this subpart shall comply with either paragraph (b)(1) or (b)(2) of this section ... (1) Uncontrolled total arsenic emissions from the glass melting furnace shall be less than 0.4 Mg (0.44 ton) per year, or ... (2) Total arsenic emissions from glass melting furnace shall be conveyed to a control device and reduced by at least 85%. /Total arsenic/

The owner or operator of each copper converter subject to the provisions of this subpart shall reduce inorganic arsenic emissions to the atmosphere by meeting the following design, equipment, work practice, and operational requirements: (1) Install, operate, and maintain a secondary hood system on each copper converter. Each secondary hood system shall consist of a hood enclosure, air curtain fan(s), exhaust system fan(s), and ductwork that conveys the captured emission to a control device ... (2) Optimize the capture of secondary inorganic arsenic emission by operating the copper converter and secondary hood systems at all times ... . /Inorganic arsenic/

For more Atmospheric Standards (Complete) data for ARSENIC TRIIODIDE (6 total), please visit the HSDB record page.

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. Do not use water on arsenic triiodide. If large quantities of combustibles are involved, use water in flooding quantities as spray and fog. Use water spray to knock down vapors.

Wear positive pressure self-contained breathing apparatus when fighting fires involving this material.

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. /Arsenical cmpd, liquid, NOS/

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. /Arsenical cmpd, solid, NOS/

Personnel protection: ... Wear positive pressure self-contained breathing apparatus when fighting fires involving this material. /Arsenical cmpd, solid, NOS/

Store in airtight containers. Protect from light.

Protect container against physical damage. Store in well ventilated area away from food or food products and combustible materials. /Inorganic arsenic cmpd/

Prompt cleanup and removal are necessary. Control runoff and isolate discharged material for proper disposal.

Floors and other accessible surfaces contaminated with inorganic arsenic may not be cleaned by the use of compressed air, and shoveling and brushing may be used only where vacuuming or other relevant methods have been tried and found not to be effective. /Inorganic arsenic compounds/

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Chemical Treatability of Arsenic; Concentration Process: Chemical Precipitation; Chemical Classification: Metal; Scale of Study: Pilot Scale; Type of Wastewater Used: Domestic Wastewater + Pure Compound; Results of Study: 5ppm @ 4gpm @ pH= 7.0. Iron system-90% reduction; low lime system-80% reduction; high lime system-76% reduction; (3 coagulant systems were used; Iron system used 45 ppm as Fe of Fe2(SO4)3 @ pH= 6.0. Low lime system used 20 ppm Fe of Fe2(SO4)3 and 260 ppm of CaO @ pH= 10.0. High lime system used 600 ppm of CaO @ pH= 11.5. Chemical coagulation was followed by multimedia filtration). /Arsenic cmpd/

Chemical Treatability of Arsenic; Concentration Process: Chemical Precipitation; Chemical Classification: Metal; Scale of Study: Full Scale Continuous Flow; Type of Wastewater Used: Domestic Wastewater; Results of Study: Effluent character (ppb): 2.5, 56% reduction with lime; 3.3, 24% reduction with lime; (lime dose of 350-400 ppm as calcium oxide @ pH= 11.3). /Arsenic cmpd/

If material not involved in fire: Use water spray to knock down vapors. Do not use water on material itself. Neutralize spilled material with crushed limestone, soda ash, or lime. Avoid breathing dusts, and fumes from burning material. Keep upwind. Do not handle broken packages without protective equipment.

Avoid bodily contact with the material. Wash away any material which may have contacted the body with copious amounts of water or soap and water.

WELL VENTILATED & ALL POISONOUS FUME ... CONDENSED & DUST CONTENT REMOVED. ... EXHAUST HOODS ... WORKTABLES ... EQUIPPED WITH DOWN-DRAUGHT ... VENTILATION. /ARSENIC CMPD/

IN ... /FACTORIES/ WITH ARSENIC HAZARD, FLOORS ... SHOULD BE ... IMPERMEABLE ... TO PREVENT ABSORPTION & ... FLUSHED DOWN FREQUENTLY WITH WATER. /ARSENIC CMPD/

For more Preventive Measures (Complete) data for ARSENIC TRIIODIDE (19 total), please visit the HSDB record page.

Tolerances for total residues of combined arsenic (calculated as As) in food are established as follows: (a) In edible tissues & in eggs of chickens & turkeys: 0.5 ppm in uncooked muscle tissue; 2 ppm in uncooked edible by-products; & 0.5 ppm in eggs. (b) In edible tissues of swine: 2 ppm in uncooked liver & kidney; 0.5 ppm in uncooked muscle tissue & by-products other than liver & kidney. /Arsenic/

Arsenic poisoning can be treated by chelation therapy, using chelating agents such as dimercaprol, EDTA or DMSA. Charcoal tablets may also be used for less severe cases. In addition, maintaining a diet high in sulfur helps eliminate arsenic from the body. (L20)

Arsenic and its metabolites disrupt ATP production through several mechanisms. At the level of the citric acid cycle, arsenic inhibits pyruvate dehydrogenase and by competing with phosphate it uncouples oxidative phosphorylation, thus inhibiting energy-linked reduction of NAD+, mitochondrial respiration, and ATP synthesis. Hydrogen peroxide production is also increased, which might form reactive oxygen species and oxidative stress. Arsenic's carginogenicity is influenced by the arsenical binding of tubulin, which results in aneuploidy, polyploidy and mitotic arrests. The binding of other arsenic protein targets may also cause altered DNA repair enzyme activity, altered DNA methylation patterns and cell proliferation. (T1, A17)

Classification of carcinogenicity: 1) evidence in humans: sufficient; 2) evidence in animals: limited. Overall summary evaluation of carcinogenic risk to humans is Group 1: Carcinogenic to humans. NOTE: This evaluation applies to the group of chemicals as a whole and not necessarily to all individual chemicals within the group. /Arsenic and arsenic compounds/

CLASSIFICATION: A; human carcinogen. BASIS FOR CLASSIFICATION: Based on sufficient evidence from human data. An increased lung cancer mortality was observed in multiple human populations exposed primarily through inhalation. Also, increased mortality from multiple internal organ cancers (liver, kidney, lung, and bladder) and an increased incidence of skin cancer were observed in populations consuming drinking water high in inorganic arsenic. HUMAN CARCINOGENICITY DATA: Sufficient. ANIMAL CARCINOGENICITY DATA: Inadequate. /Inorganic Arsenic/ /based on former classification system/

A1: Confirmed human carcinogen. /Arsenic and inorganic compounds, as As/

Evaluation: There is sufficient evidence in humans that arsenic in drinking-water causes cancers of the urinary bladder, lung and skin ... Overall evaluation: Arsenic in drinking-water is carcinogenic to humans (Group 1). /Arsenic in drinking-water/

Arsenic compounds, inorganic: known to be a human carcinogen.

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. /Arsenical cmpd, liquid, NOS/

If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. /Arsenical cmpd, solid, NOS/

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Arsenic triiodide is included on this list.

(a) The owner or operator of an existing glass melting furnace subject to the provisions of this subpart shall comply with either paragraph (a)(1) or (a)(2) of this section ... (1) Uncontrolled total arsenic emissions from the glass melting furnace shall be less than 2.5 Mg (2.7 ton) per year, or ... (2) Total arsenic emissions from glass melting furnace shall be conveyed to a control device and reduced by at least 85%. /Total arsenic/

(b) The owner or operator of a new or modified glass melting furnace subject to the provisions of this subpart shall comply with either paragraph (b)(1) or (b)(2) of this section ... (1) Uncontrolled total arsenic emissions from the glass melting furnace shall be less than 0.4 Mg (0.44 ton) per year, or ... (2) Total arsenic emissions from glass melting furnace shall be conveyed to a control device and reduced by at least 85%. /Total arsenic/

The owner or operator of each copper converter subject to the provisions of this subpart shall reduce inorganic arsenic emissions to the atmosphere by meeting the following design, equipment, work practice, and operational requirements: (1) Install, operate, and maintain a secondary hood system on each copper converter. Each secondary hood system shall consist of a hood enclosure, air curtain fan(s), exhaust system fan(s), and ductwork that conveys the captured emission to a control device ... (2) Optimize the capture of secondary inorganic arsenic emission by operating the copper converter and secondary hood systems at all times ... . /Inorganic arsenic/

For more Atmospheric Standards (Complete) data for ARSENIC TRIIODIDE (6 total), please visit the HSDB record page.

Toxic pollutant designated pursuant to section 307(a)(1) of the Federal Water Pollution Control Act and is subject to effluent limitations. /Arsenic & cmpd/

For the maximum protection of human health from the potential carcinogenic effects due to exposure of arsenic through ingestion of contaminated water & contaminated aquatic organisms, the ambient water concn should be zero based on the nonthreshold assumption for this chemical. However, zero level may not be attainable at the present time. Therefore, the levels which may result in incremental increase of cancer risk over the lifetime are estimated at 1X10-5, 1X10-6, & 1X10-7. The corresponding criteria are 22 ng/l, 2.2 ng/l, & .22 ng/l, respectively .... For consumption of aquatic organisms only, excluding consumption of water, the levels are 175 ng/ml, 17.5 ng/l, & 1.75 ng/l, respectively. /Arsenic/

D004; A solid waste containing arsenic may or may not become characterized as a hazardous waste when subjected to the Toxicity Characteristic Leaching Procedure listed in 40 CFR 261.24, and if so characterized, must be managed as a hazardous waste.

(AZ) ARIZONA 10 ug/L /Arsenic/

(CT) CONNECTICUT 10 ug/L /Arsenic/

10 ug/L /Arsenic/

Maximum Contaminant Level: 0.010 mg/L /Arsenic/

Arsenic is absorbed mainly by inhalation or ingestion, as to a lesser extent, dermal exposure. It is then distributed throughout the body, where it is reduced into arsenite if necessary, then methylated into monomethylarsenic (MMA) and dimethylarsenic acid (DMA) by arsenite methyltransferase. Arsenic and its metabolites are primarily excreted in the urine. Arsenic is known to induce the metal-binding protein metallothionein, which decreases the toxic effects of arsenic and other metals by binding them and making them biologically inactive, as well as acting as an antioxidant. (L20)

Used as a reagent and veterinary medication; [HSDB]

MEDICATION (VET):

Used in ... chemical analysis.

MEDICATION

From the elements or from AsCl3 and KI: Bailar, Inorg Syn I, 103 (1939).

Arsenic triiodide can be precipitated from a hot solution of trivalent arsenic in hydrochloric acid by the addition of potassium iodide or it can be formed by treating elemental arsenic with a solution of iodine in carbon disulfide.