o-フタルアルデヒド
o-フタルアルデヒド · オルトフタルアルデヒド · 1,3,5-シクロヘキサトリエン-1,6-ジカルボアルデヒド · ベンゼン-1,2-ジカルボアルデヒド · フタラール · ディスオーパ · o-フタルジアルデヒド · 1,2-ベンゼンジカルボアルデヒド

識別子と物理属性
| CAS No. | 643-79-8 |
|---|---|
| 分子式 | C8H6O2 |
| 平均分子量 | 134.13 g/mol |
| 単同位体質量 | 134.03677943 g/mol |
| SMILES | O=Cc1ccccc1C=O |
| InChIKey | ZWLUXSQADUDCSB-UHFFFAOYSA-N |
| PubChem CID | 4807 |
| ChEMBL | CHEMBL160145 |
| ChEBI | CHEBI:70851 |
| EC No. | 211-402-2 |
| DTXSID | DTXSID6032514 |
| 現地名 | o-フタルアルデヒド |
化学・物理的性質
| XLogP | 1.2 |
|---|---|
| 極性表面積 | 34.1 |
| 水素結合供与体数 | 0 |
| 水素結合受容体数 | 2 |
| 回転可能結合数 | 2 |
| 重原子数 | 10 |
| 形式電荷 | 0 |
| 複雑度 | 115 |
| 物質分類 | Other Classes -> Benzaldehydes |
| SpringerMaterials Properties | Crystal structure |
| 農薬 | Environmental transformation -> Pesticide transformation products (metabolite, successor) |
| LogP(分配係数) | log Kow = 0.510.99 (30 °C) |
| 密度 | Density (at 20 °C): 1.13 g/cm³ |
| Color/Form | Long, pale yellow needles from petroleum ether (MP 56-56.5 °C). Also reported as colorless powder (MP: 54 °C)Yellow needles or crystals from ligroin |
| 溶解度 | In water, 5 g/100 mL at 20 °CVery soluble in ethyl ether, ethanolSolubility in water, g/100ml at 20 °C: 3.8 (soluble)20°C での o-フタルアルデヒドの溶解度は、3g/100mL ジイソプロピル エーテル、5g/100mL 脱イオン水、20g/100mL クロロホルム、または 20g/100mL アセトンです。溶ける |
| 引火点 | 132 °C (270 °F) - closed cup132 °C c.c.>230 °F |
| 沸点 | BP: 83 °C at 0.8 mm Hg83-84 °C (0.7501 mmHg) |
| Decomposition | When heated to decomposition it emits acrid smoke and irritating fumes. |
| 融点 | 55.8 °C55-58 °C(lit.) |
| 蒸気密度 | Relative vapor density (air = 1): 4.6 |
| 蒸気圧 | 0.56Pa at 25℃ |
| 屈折率 | 1.4500 (estimate) |
| 貯蔵条件 | 2-8°C |
| 外観・状態 | 粉 |
| 色 | 黄色 |
| pH | 7 (53g/l, H2O, 20℃) |
| Merck | 14,7368 |
| BRN | 878317 |
| 安定性 | 安定。空気に敏感。強酸化剤、強塩基とは相容れない。 |
| InChI | 1S/C8H6O2/c9-5-7-3-1-2-4-8(7)6-10/h1-6H |
| InChIKey | ZWLUXSQADUDCSB-UHFFFAOYSA-N |
| SMILES | O=Cc1ccccc1C=O |
| LogP(分配係数) | 0.99 at 30℃ |
| CAS データベース | 643-79-8(CAS DataBase Reference) |
| NISTの化学物質情報 | O-phthalaldehyde(643-79-8) |
| EPAの化学物質情報 | 1,2-Benzenedicarboxaldehyde (643-79-8) |
化学的特性
o-Phthalaldehyde is a pale yellow crystalline solid. o-Phthalaldehyde is mainly used as a high-level disinfectant (a low-temperature chemical method) for heat-sensitive medical and dental equipment such as endoscopes and thermometers; in recent years, it has gained popularity as a safe and better alternative to glutaraldehyde. There are some researches show, pH7.5 contains the sterilizing agent of o-phthalaldehyde 0.5%, and its sterilizing power, sterilization speed, stability and toxicity all are better than glutaraldehyde, can kill mycobacterium in the 5min, the bacterium number reduces by 5 logarithmic value, and o-phthalaldehyde is very stable, tasteless in pH3~9 scopes, non-stimulated to human nose, eye mucosa, and need not activate before using, various materials are had good consistency, have tangible microbiocidal activity.
安全性と法規制
| GHS 分類 | DangerH228 (44.3%): Flammable solid [Danger Flammable solids]P210, P240, P241, P260, P261, P264, P264+P265, P270, P271, P272, P273, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P319, P321, P330, P332+P317, P333+P317, P362+P364, P363, P370+P378, P391, P403+P233, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 235 reports by companies from 15 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.H301: Toxic if swallowed [Danger Acute toxicity, oral] |
|---|---|
| 規制情報 | Chemical: 1,2-BenzenedicarboxaldehydeStatus: Active Update: 19-02-2019 https://echa.europa.eu/registration-dossier/-/registered-dossier/27723Phthaldialdehyde: Does not have an individual approval but may be used under an appropriate group standard |
| 火災危険 | Combustible. |
| 有害性の概要 | Similar properties and health effects to glutaraldehyde[ACGIH] Severe gastrointestinal tract damage and hematological changes observed in 90-day oral study of ratsDelayed skeletal development observed in rats at doses maternally toxic[NTP] Symptoms reported from occupational exposure to Cidex-OPA (aqueous solution containing 0.56% o-phthalaldehyde) include exacerbation of asthma, anaphylaxis, burns and/or irritation, and dermal hypersensitivity[NTP] Causes burnsInhalation may cause corrosive injuries to upper respiratory tract and lungsMay cause skin sensitizationToxic by ingestion[Alfa Aesar MSDS] Occupational asthma confirmed in an endoscopy unit worker[Malo] See Benzaldehyde. See 2-Methylbenzaldehyde. |
| UN 分類 | UN Hazard Class: 8UN Subsidiary Risks: 6.1UN Pack Group: II |
| Chemical Dangers | Reacts with oxidants, amines and strong bases. This generates fire and explosion hazard. |
| Packaging and Labelling | Do not transport with food and feedstuffs. Marine pollutant. |
用途
解説
1,2-benzonedicarboxaldehyde.C8H6O2(134.13).o-キシレンの光ハロゲン化により,または,α,α,α′,α′-テトラブロモあるいはテトラクロロ-o-キシレンの加水分解によっても得られる.淡黄色の結晶.融点55~57 ℃,沸点83~84 ℃(106 Pa).フタルアルデヒドは,水,エタノール,エーテル,ヘキサンに可溶,石油エーテルに難溶.水蒸気蒸留できる.有機合成原料および蛍光ラベル化剤として,第一級アミン,アミノ酸,アミノ糖の分析に用いられる.森北出版「化学辞典(第2版)
用途
蛍光修飾試薬、二価性試薬。
用途
OPAは、紫外線や空気酸化に弱い。 1級アミノ基のプレ?ポストラベル化試薬(高感度蛍光試薬)として、フルオレサミン(英語版)と共に広く使用される。 N-アセチルシステインと共に使用すると、蛍光物質が生成する。
使用
o-Phthalaldehyde can be widely used for precolumn derivatization of amino acids in HPLC separation or Capillary electrophoresis. For flow cytometric measurements of protein thiol groups.
製法・合成法
製造方法
o-Phthalaldehyde is a high-level chemical disinfectant that is commonly used for disinfection of dental and medical instruments as an alternative to glutaraldehyde, which is a known skin and respiratory sensitizer. A variety of processes for manufacturing o-phthalaldehyde have been reported in the literature. o-Phthalaldehyde is produced by heating pure benzaldehyde and chloroform with potassium hydroxide solution. The resulting solution is further acidified with hydrochloric acid and cooled to yield a colorless powder of o-phthalaldehyde. It is also produced by ozonization of naphthalene in alcohol followed by catalytic hydrogenation. Catalytic oxidation of various chemicals is also used in manufacturing o-phthalaldehyde. o-Phthalaldehyde can be manufactured by oxidation of phthalan by nitrogen monoxide in acetonitrile with N-hydroxyphthalimide as the catalyst to yield 80% to 90%.