t-ブチルヒドロペルオキシド
tert-ブチルヒドロペルオキシド (70%水溶液) · tert-ブチル=ヒドロペルオキシド · 1,1-ジメチルエチルヒドロペルオキシド · (1,1-ジメチルエチル)ヒドロペルオキシド · ペルブチルH · tert-ブチルヒドロペルオキシド · カドックスTBH · t-ブチルハイドロパーオキサイド

識別子と物理属性
| CAS No. | 75-91-2 |
|---|---|
| 分子式 | C4H10O2 |
| 平均分子量 | 90.12 g/mol |
| 単同位体質量 | 90.06807956 g/mol |
| SMILES | CC(C)(C)OO |
| InChIKey | CIHOLLKRGTVIJN-UHFFFAOYSA-N |
| PubChem CID | 6410 |
| ChEMBL | CHEMBL348399 |
| ChEBI | CHEBI:64090 |
| EC No. | 200-915-7 |
| DTXSID | DTXSID9024693 |
| 現地名 | t-ブチルヒドロペルオキシド |
化学・物理的性質
| XLogP | 0.6 |
|---|---|
| 極性表面積 | 29.5 |
| 水素結合供与体数 | 1 |
| 水素結合受容体数 | 2 |
| 回転可能結合数 | 1 |
| 重原子数 | 6 |
| 形式電荷 | 0 |
| 複雑度 | 35 |
| LogP(分配係数) | -1.3 (calculated) |
| 密度 | 0.88 at 77 °F (USCG, 1999) - Less dense than waterwill float0.8960 g/cu cm at 20 °CRelative density (water = 1): 0.930.86 @25 °C0.937 g/mL at 20 °C |
| Color/Form | LiquidWater-white liquid |
| 溶解度 | greater than or equal to 100 mg/mL at 72 °F (NTP, 1992)Soluble in waterModerately soluble in waterSlightly soluble in waterSoluble in ethanol, ethyl ether, carbon tetrachloride, chloroformFor more Solubility (Complete) data for tert-Butyl hydroperoxide (7 total), please visit the HSDB record page.混和性 |
| 引火点 | 80 °F (NTP, 1992)43 °(may explode on heating)Less than 80 °F (less than 27 °C) /closed cup/43 °C85 °F |
| 沸点 | 192 °F at 760 mmHg (decomposes)104 °F at 23 mmHg (NTP, 1992)BP: 89 °C (decomposes)BP: 35 °C at 20 mm HgBP: 40 °C at 23 mm Hg37 °C (15 mmHg) |
| Decomposition | When heated to decomposition it emits acrid smoke and fumes.89 °C |
| 融点 | 18 °F (NTP, 1992)-8 °CMP: 6 °C-3 °C-2.8 °C |
| 蒸気密度 | 2.07 (NTP, 1992) - Heavier than airwill sink (Relative to Air)2.07 (Air = 1)Relative vapor density (air = 1): 3.1 |
| 臭気閾値 | Odor Threshold Low: 0.05 [ppm] |
| 蒸気圧 | 5.46 [mmHg]5.46 mm Hg at 25 °CVapor pressure, kPa at 20 °C: 3.07 (calculated)3.07 [mm Hg] @20 °C62 mmHg at 45 °C |
| 屈折率 | Index of refraction = 1.4015 at 20 °C/Dn20/D 1.403 |
| 貯蔵条件 | 2-8°C |
| pKa(酸解離定数) | pK1: 12.80 (25°C) |
| 外観・状態 | 液体 |
| 色 | 無色透明 |
| pH | 4.3 |
| Merck | 14,1570 |
| BRN | 1098280 |
| ヘンリー定数 | 4.2×100 mol/(m3Pa) at 25℃, Wang et al. (2017) |
| 安定性 | 安定していますが、密閉状態で加熱すると爆発する可能性があります。微量の金属、モレキュラーシーブ、またはその他の汚染物質は、分解を加速する可能性があります。還元剤、可燃物、酸とは相容れない。 |
| InChI | 1S/C4H10O2/c1-4(2,3)6-5/h5H,1-3H3 |
| InChIKey | CIHOLLKRGTVIJN-UHFFFAOYSA-N |
| SMILES | CC(C)(C)OO |
| LogP(分配係数) | 1.230 (est) |
| CAS データベース | 75-91-2(CAS DataBase Reference) |
| NISTの化学物質情報 | Tert-butyl hydroperoxide(75-91-2) |
| EPAの化学物質情報 | tert-Butyl hydroperoxide (75-91-2) |
化学的特性
tert-Butyl hydroperoxide (TBHP) is a water-white liquid commonly commercially available as a 70% solution in water; 80% solutions are also available. It is used to initiate polymerization reactions and in organic syntheses to introduce peroxy groups into the molecule.
安全性と法規制
| GHS 分類 | WarningH341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]P203, P280, P318, P405, and P501 (click each P-code to see the statement)This chemical does not meet GHS hazard criteria for 17.3% (234 of 1351) of reports. |
|---|---|
| 規制情報 | Chemical: Hydroperoxide, 1,1-dimethylethylHydroperoxide, 1,1-dimethylethyl is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Hydroperoxide, 1,1-dimethylethyl are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 10-02-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/13623Hydroperoxide, 1,1-dimethylethyl: Does not have an individual approval but may be used under an appropriate group standardThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.) |
| その他の安全情報 | IMAP assessments - Selected organic hydroperoxides: Human health tier II assessment |
| 輸送ラベル(DOT) | Organic Peroxide |
| 火災危険 | Behavior in Fire: May explode in fire (USCG, 1999)Excerpt from ERG Guide 145 [Organic Peroxides (Heat and Contamination Sensitive)]:May explode from heat or contamination. May ignite combustibles (wood, paper, oil, clothing, etc.). May be ignited by heat, sparks or flames. May burn rapidly with flare-burning effect. Containers may explode when heated. Runoff may create fire or explosion hazard. (ERG, 2024)Excerpt from ERG Guide 146 [Organic Peroxides (Heat, Contamination and Friction Sensitive)]:May explode from heat, shock, friction or contamination. May ignite combustibles (wood, paper, oil, clothing, etc.). May be ignited by heat, sparks or flames. May burn rapidly with flare-burning effect. Containers may explode when heated. Runoff may create fire or explosion hazard. (ERG, 2024)Flammable. Many reactions may cause fire or explosion. Risk of fire and explosion on heating. Above 43 °C explosive vapour/air mixtures may be formed. |
| 火災の可能性 | Very dangerous fire hazard when exposed to heat or flame, or by spontaneous chemical reaction such as with reducing materials. |
用途
解説
t-ブチルヒドロペルオキシド,工業製品は,約70% 水溶液である.融点4.0~4.5 ℃,沸点35 ℃(2.7 kPa).d204 0.896.n20D 1.4007.有機溶媒に可溶.約75 ℃ まで安定であるが,常圧蒸留では爆発する.有機合成では,ヘキサカルボニルモリブデンなどの金属触媒の存在下,不飽和アルコールの不斉エポキシ化,シリルエノールエーテルの酸化開裂,アリル位の酸化などに広く用いられている.重合触媒,硬化剤として工業的に利用される.森北出版「化学辞典(第2版)
用途
有機合成試薬。
用途
樹脂製造用重合剤、硬化剤
使用
tert-Butyl hydroperoxide is used as an initiator for radical polymerization and in various oxidation process such as sharpless epoxidation. It is involved in osmium catalyzed vicinal hydroxylation of olefins under alkaline conditions. Furthermore, it is used in catalytic asymmetric oxidation of sulfides to sulfoxides using binaphthol as a chiral auxiliary and in the oxidation of dibenzothiophenes. It plays an important role for the introduction of peroxy groups in organic synthesis.
説明
Tert-butyl hydroperoxide is an alkyl hydroperoxide in which the alkyl group is tert-butyl. It is widely used in a variety of oxidation processes. It has a role as an antibacterial agent and an oxidising agent.
一般的な説明
Watery odorless colorless liquid. Floats and mixes slowly with water.
製法・合成法
調製方法
TBHP is produced by the liquid-phase reaction of isobutane and molecular oxygen or by mixing equimolar amounts of t-butyl alcohol and 30–50% hydrogen peroxide. TBHP can also be prepared from t-butyl alcohol and 30% hydrogen peroxide in the presence of sulfuric acid or by oxidation of tert-butylmagnesium chloride. The manufacturing process of TBHP is in a closed system.