ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.1
  1. ホーム
  2. /化合物

メタクリル酸 エチル

Ethyl Methacrylate

HCID 7343
反応を作成
印刷

データを補完しています。しばらくしてからページを更新すると最新の内容を表示できます

基本情報概要名称と識別子物性安全と法規制化学と産業関連反応化合物ノート
部分構造検索類似構造を探す

基本情報

CAS
97-63-2
標準SMILES
C=C(C)C(=O)OCC
InChIKey
SUPCQIBBMFXVTL-UHFFFAOYSA-N
分子式
C6H10O2
平均分子量
114.14 g/mol
単同位体質量
114.06807956

概要

Ethyl methacrylate appears as a colorless moderately toxic liquid with an acrid odor. Flash point of 70 °F. Boiling point 278 °F. Vapors irritate the eyes and respiratory system. Less dense than water. Not soluble in water. Used to make polymers and other chemicals.

名称と識別子

優先名称
Ethyl Methacrylate
IUPAC
ethyl 2-methylprop-2-enoate
現地名
メタクリル酸 エチル
英語名
Ethyl methacrylate
分子式
C6H10O2
分子量
114.14

名称と別名

Ethyl methacrylate97-63-2ethyl 2-methylprop-2-enoate2-Propenoic acid, 2-methyl-, ethyl esterEthyl 2-methylacrylateEthyl 2-methacrylateEthyl 2-methyl-2-propenoateRhoplex AC-33METHACRYLIC ACID, ETHYL ESTERRCRA waste number U1182-Methylacrylic acid, ethyl esterEthyl alpha-methylacrylate
名称をさらに表示
メタクリル酸 エチルエチルメタクリレートモノマーイソプロペン酸エチルメタクリル酸エチル2-メチルアクリル酸エチルエチルメタクリラートモノマー2-メチル-2-プロペン酸エチルエチルメタクリラートエチルメタクリレートエチル=メタクリラート2-メチルプロペン酸エチルEMAEMAEthylmethacrylatEthyl Methacrylate (stabilized with HQ)PEMTMAM6MCKDCD227PEMPTH23AG
NSC 24152CCRIS 4817Ethylester kyseliny methakryloveDTXSID1025308Ethyl 2-methylpropenoateHSDB 1332Rhoplex AC-33 (rohm and haas)EINECS 202-597-5

データベース識別子

CAS
97-63-2
PubChem CID
7343
DTXSID
DTXSID1025308
ChEMBL
CHEMBL3182984
UNII
80F70CLT4O
EC Number
202-597-5
Nikkaji
J3.576I

物性

構造計算による物性補完中

XLogP
1.9
極性表面積
26.3 Ų
水素結合供与体数
0
水素結合受容体数
2
回転可能結合数
3
重原子数
8
形式電荷
0
複雑度
105

実験および物理化学的性質

Chemical Classes · 2 件

Flammable agents - 3rd degree

Volatile Organic Compound (VOC)

PolymersPlastics & Rubber -> (Meth)acrylates
Cosmetics · 2 件

Cosmetic ingredients (Ethyl Methacrylate) -> CIR (Cosmetic Ingredient Review)

Viscosity controlling

SpringerMaterials PropertiesBoiling point
FragrancesFragrance Ingredient (Ethyl methacrylate) -> IFRA transparency List
LogP · 3 件

log Kow = 1.94

1.94

1.5

OdorAcrid odor
Density · 5 件

0.9151 at 68 °F (USCG, 1999) - Less dense than water; will float

0.9135 g/cu cm at 20 °C

Relative density (water = 1): 0.91

0.9151

0.911 @25 °C

Flavoring AgentsEU Flavoring substances
Viscosity0.92 mPa (cP)

安全と法規制

安全情報は参考情報です。供給元の安全データシート(SDS)、適用法令、専門家による評価に代わるものではありません。

GHS分類

GHS Classification · 6 件

Danger

H225: Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P272, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P333+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

This chemical does not meet GHS hazard criteria for < 0.1% (1 of 1196) of reports.

Danger

H225 (> 99.9%): Highly Flammable liquid and vapor [Danger Flammable liquids]

危険有害性情報

Regulatory Information · 6 件

Chemical: 2-Propenoic acid, 2-methyl-, ethyl ester

Commission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)

2-Propenoic acid, 2-methyl-, ethyl ester is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Propenoic acid, 2-methyl-, ethyl ester are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Ethyl methacrylate (EC: 202-597-5)

2-Propenoic acid, 2-methyl-, ethyl ester: HSNO Approval: HSR001044 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelFlammable Liquid
Fire Hazards · 3 件

Behavior in Fire: Sealed containers may rupture explosively if hot. Heat can cause a violent polymerization reaction with rapid release of energy. Vapors are heavier than air and can travel to a source of ignition and flash back. (USCG, 1999)

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Highly flammable. Vapour/air mixtures are explosive.

Fire Potential

化学と産業

薬理情報

Metabolism/Metabolites · 5 件

Methyl methacrylate and other short chain alkyl-methacrylate esters are initially hydrolyzed by non-specific carboxylesterases to methacrylic acid and the structurally corresponding alcohol in several tissues. /Short chain alkyl-methacrylate esters/

Methacrylate esters can conjugate with glutathione (GSH) in vitro, although they show a low reactivity, since the addition of a nucleophile at the double bond is hindered by the alpha-methyl side-group ... Hence, ester hydrolysis is considered to be the major metabolic pathway for alkyl-methacrylate esters, with GSH conjugation only playing a minor role in their metabolism, and then possibly only when very high tissue concentrations are achieved. /Short chain alkyl-methacrylate esters/

Acrylates and methacrylates are detoxified predominantly via conjugation with glutathione via the Michael addition reaction or glutathione-S-transferase. They are also likely to be hydrolyzed via carboxylesterases. The lower molecular weight esters are rapidly metabolized and eliminated, therefore, will not likely cause cumulative toxicity.

Small quantities of methacrylates may readily be metabolized by saponification into the alcohol & methacrylic acid. The latter may form an acetyl CoA derivative, which then enters the normal lipid metabolism. /Methacrylates/

For more Metabolism/Metabolites (Complete) data for Ethyl methacrylate (6 total), please visit the HSDB record page.

用途と製造

Uses · 6 件

CIR ingredient: Ethyl Methacrylate

Acrylates and methacrylates are monomers that are combined with other monomers or polymers to produce plastics used in cosmetics, medicine, dentistry, and manufacturing industries. [Marks, p. 181] Used to make polymers with applications in building, automotive, aerospace, and furniture industries and in dentures, paints, coatings, contact lenses, and cosmetics; Also used as chemical intermediate; [HSDB]

Plastic Composites Manufacturing [Category: Industry]

Ethyl methacrylate is used to make polymers, which in turn are used for building, automotive, aerospace, and furniture industries.

Used as a comonomer in acrylic polymers for surface coating resins, acrylic emulsion polymers for polishes, etc; comonomer in denture-base material; and used as a chemical intermediate

関連反応

56 件
反応記録を作成
HRID 98839 の反応式
HRID 98839反応物としてTraining data from https://doi.org/10.1039/C8SC04228D (2/10)
HRID 199602 の反応式
HRID 199602反応物としてTraining data from https://doi.org/10.1039/C8SC04228D (6/10)
HRID 204633 の反応式
HRID 204633反応物としてTraining data from https://doi.org/10.1039/C8SC04228D (6/10)
HRID 215694 の反応式
HRID 215694反応物としてuspto-grants-2012_06
HRID 225881 の反応式
HRID 225881反応物としてuspto-grants-2009_07
HRID 323845 の反応式
HRID 323845反応物としてuspto-grants-2001_04
HRID 323846 の反応式
HRID 323846反応物としてuspto-grants-2001_04
HRID 323847 の反応式
HRID 323847反応物としてuspto-grants-2001_04
前へ1 / 7 ページ

化合物ノート

このページの内容基本情報概要名称と識別子物性安全と法規制化学と産業関連反応化合物ノート
Color/Form
Colorless, liquid
Solubility · 5 件

5 to 10 mg/mL at 68 °F (NTP, 1992)

Slightly soluble in chloroform; miscible with ethanol, ethyl ether

Insoluble in water

In water, 5.4X10+3 mg/L at 25 °C

Solubility in water: poor

物理化学的性質

融点
-75 °C · -75 °C
沸点
118 · 118-119 °C (lit.)
比重(密度)
0.917 g/mL · 0.917 g/mL at 25 °C (lit.)
蒸気密度
3.9 · >3.9 (vs air)
蒸気圧
15 mm · 15 mm Hg ( 20 °C)
屈折率
20 · n20/D 1.413(lit.)
闪点
60 °F · 60 °F
貯蔵温度
2 · 2-8°C
溶解性
5.1 g/リットル · 5.1g/リットル
外見
液体
色
無色透明
臭い (Odor)
刺激的なアクリル。
においのタイプ
アクリレート
爆発限界(explosive limit)
1.8 % · 1.8%(V)
水溶解度
4 g/L · 4g/L(20℃)
BRN
471201 · 471201
Henry's Law Constant
1.7 · 1.7×10-2 mol/(m3Pa) at 25℃, Duchowicz et al. (2020)
安定性
光や熱の存在下で重合することができます。過酸化物、酸化剤、塩基、酸、還元剤、ハロゲンおよびアミンとは混和せず、可燃性です。
化粧品成分の機能
粘度制御
InChI
1S/C6H10O2/c1-4-8-6(7)5(2)3/h2,4H2,1,3H3
InChIKey
SUPCQIBBMFXVTL-UHFFFAOYSA-N
SMILES
O(CC)C(=O)C(=C)C
LogP
1.94 · 1.940
CAS データベース
97 · 97-63-2(CAS DataBase Reference)
NISTの化学物質情報
2 · 2-Propenoic acid, 2-methyl-, ethyl ester(97-63-2)
EPAの化学物質情報
Ethyl methacrylate (97-63-2)

化学的性質

化学的特性Ethyl methacrylate is a clear, colorless, and highly flammable liquid that polymerizes but at a slower rate than that of the parent acrylate.

· 2 件

A very dangerous fire and explosion hazard when exposed to heat, sparks, or flame; can react with oxidizing materials.

The low flash points of the lower methacrylates create a fire hazard, & these compounds can form explosive mixtures with air ... /Methacrylates/

Health Hazards · 2 件

Inhalation may cause irritation of the mucous membrane. Ingestion causes irritation of mouth and stomach. Contact with liquid irritates eyes and skin. (USCG, 1999)

· May cause toxic effects if inhaled or absorbed through skin.

Hazards Summary · 1 件

A skin, eye, and respiratory tract irritant; Can cause skin sensitization; Causes lachrymation; [ICSC] Reports of occupational contact dermatitis; A lachrymator; Inhalation of high vapor concentrations may cause symptoms of CNS depression; [HSDB] An irritant and lachrymator; May cause skin sensitization; [Aldrich MSDS] Occupational asthma reported in cosmetologists; [Reference #1] Ethyl methacrylate, stabilized (UN2277) has warning of explosive polymerization; [ERG 2016]

DOT ID and Guide2277 130P
Reactive GroupAcrylates and Acrylic Acids
EC ClassificationSymbol: F, Xi; R: 11-36/37/38-43; S: (2)-9-16-29-33; Note: D
UN ClassificationUN Hazard Class: 3; UN Pack Group: II
Special Reports · 3 件

European Commission, ESIS; IUCLID Dataset, Methyl methacrylate (80-62-6) (2000 CD-ROM edition) contains information on use, toxicology, and environmental effects of this chemical as supplied to the European Union by industry.[Available from, as of February 24, 2010: http://esis.jrc.ec.europa.eu/]

Organization for Economic Cooperation and Development; Screening Information Data Set for Short Chain Alkyl Methacrylates, CAS Nos. 97-63-2, 97-86-9, 97-88-1, 688-84-6 (April 2004). This OECD Initial Assessment of HPV Chemicals is part of a series of OECD SIDS documents published by UNEP Chemicals to facilitate the access to information needed for health and environmental risk assessments of chemicals.[Available from, as of February 16, 2010: http://www.oecd.org/document/63/0,2340,en_2649_34379_1897983_1_1_1_1,00.html]

Cosmetic Ingredient Review Expert Panel; Int J Toxicol 21 (Suppl 1): 63-79 (2002). This report is supported by an industry association to evaluate the safety of chemicals used in cosmetics.

RCRA Requirements · 1 件

U118; As stipulated in 40 CFR 261.33, when ethyl methacrylate, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5).

安全と保護具

Fire Fighting · 2 件

Excerpt from ERG Guide 130 [Flammable Liquids (Water-Immiscible / Noxious); polymerization hazard]:

Use powder, AFFF, foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.

First Aid Measures · 4 件

Fresh air, rest. Refer for medical attention.

Remove contaminated clothes. Rinse and then wash skin with water and soap. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Give one or two glasses of water to drink. Do NOT induce vomiting. Refer for medical attention .

Accidental Release Measures · 2 件

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 件

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

General First Aid:

Safe StorageFireproof. Separated from strong oxidants. Cool. Keep in the dark. Store only if stabilized.
Firefighting HazardsVapors are heavier than air and can travel back to a source of ignition and flash back.
Exposure Control and Personal Protection· Wear positive pressure self-contained breathing apparatus (SCBA).
Fire Fighting Procedures · 3 件

Use dry chemical, carbon dioxide, or alcohol foam extinguishers. Vapors are heavier than air and will collect in low areas. Vapors may travel long distances to ignition sources and flashback. Vapors in confined areas may explode when exposed to fire. Containers may explode in fire. Storage containers and parts of containers may rocket great distances, in many directions. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Notify local health and fire officials and pollution control agencies. From a secure, explosion-proof location, use water spray to cool exposed containers. If cooling streams are ineffective (venting sound increases in volume and pitch, tank discolors or shows any signs of deforming), withdraw immediately to a secure position.

If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may spread fire. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use foam, dry chemical, or carbond dioxide. Evacuation: If fire becomes uncontrollable or container is exposed to direct flame, consider evacuation of 1/3 mile radius.

Evacuation: If fire becomes uncontrollable or container is exposed to direct flame, consider evacuation of 1/3 mile radius.

Storage Conditions · 4 件

Before entering confined space where this chemical may be present, check to make sure that an explosive concentration does not exist. Store in tightly closed containers in a cool, well ventilated area away from oxidizers (such as perchlorates, peroxides, permanganates, chlorates, and nitrates). Sources of ignition, such as smoking and open flames, are prohibited where ethyl methacrylate is handled, used, or stored. Metal containers involving the transfer of 5 gallons or more of ethyl methacrylate should be grounded and bonded. Drums must be equipped with self-closing valves, pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening and closing containers of ethyl methacrylate.

Storage temp: below 38 °C (100 °F).

Acrylic resin ... /monomers, such as ethyl methacrylate/ polymerize readily in the presence of light, heat, or catalysts such as benzoyl peroxide; they must be stored ... with inhibitors present to avoid spontaneous & explosive polymerization.

The effectiveness of phenolic inhibitors, eg, monomethyl ether of hydroquinone & hydroquinone, depends on the presence of oxygen. Monomers inhibited with these materials must be stored in air rather than in an inert atmosphere. Contamination must be avoided; eg, moisture may cause rust-initiated polymerization. Temperatures during storage must be kept low to minimize formation of peroxides & other oxidation products. ... In general, the methacrylate monomers should not be stored for longer than 1 year. ... The methacrylic esters may be stored in mild steel (low carbon), stainless steel, or aluminum. /Methacrylate monomers/

Cleanup Methods · 2 件

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a permitted wastewater treatment facility is acceptable only after review by the governing authority and assurance that "pass through" violations will not occur. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must be evaluated in accordance with EPA 40 CFR Part 261, specifically Subpart B, in order to determine the appropriate local, state and federal requirements for disposal.

Spill Handling: Evacuate and restrict persons not wearing protective equipment from area of spill or leak until cleanup is complete. Remove all ignition sources. Establish forced ventilation to keep levels below explosive limit. Absorb liquids in vermiculite, dry sand, earth, peat, carbon, or a similar material and deposit in sealed containers. Keep ethyl methacrylate out of a confined space, such as a sewer, because of the possibility of an explosion, unless the sewer is designed to prevent the build-up of explosive concentrations. It may be necessary to contain and dispose of this chemical as a hazardous waste. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters.

Nonfire Spill ResponseExcerpt from ERG Guide 130 [Flammable Liquids (Water-Immiscible / Noxious); polymerization hazard]:
Disposal Methods · 2 件

Generators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste number U118, must conform with USEPA regulations in storage, transportation, treatment and disposal of waste.

A good candidate for fluidized bed incineration at a temperature range of 450 to 980 °C and residence times of seconds for liquids and gases, and longer for solids. A good candidate for rotary kiln incineration at a temperature range of 820 to 1,600 °C and residence times of seconds for liquids and gases, and hours for solids.

毒性情報

Ecotoxicity Values · 5 件

LC50; Species: Oncorhynchus mykiss (Rainbow trout); Conditions: flow-through; Concentration: 100 mg/L for 96 hr

EC50; Species: Brachionus calyciflorus (Rotifer, age <2 hr); Conditions: freshwater, static, 25 °C, pH 7.5; Concentration: 250 mg/L for 48 hr (95% confidence interval: 0-620 mg/L); Effect: decreased reproduction (progeny count/ numbers) /99.1% purity/

EC50; Species: Daphnia magna (water flea); Conditions: flow-through; Concentration: >66 mg/L for 48 hr; Effect: Immobilization

EC50; Species: Pseudokirchneriella subcapitata (algae); Conditions: static, closed vessel; Concentration: >110 mg/L for 72 hr; Effect: growth rate

EC50; Species: Pseudokirchneriella subcapitata (algae); Conditions: static, closed vessel; Concentration: 72 mg/L for 72 hr; Effect: growth rate

Environmental Fate · 3 件

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 17(SRC), determined from a structure estimation method(2), indicates that ethyl methacrylate is expected to have very high mobility in soil(SRC). Volatilization of ethyl methacrylate from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 5.7X10-4 atm-cu m/mole(SRC), derived from its vapor pressure, 20.6 mm Hg(3), and water solubility, 5,400 mg/L(4). Ethyl methacrylate is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(3). Ethyl methacrylate has reported biodegradation rates of 69% and 79% in 28 days utilizing the Closed Bottle test(5,6) indicating that it is readily biodegradable in soil(SRC).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 17(SRC), determined from a structure estimation method(2), indicates that ethyl methacrylate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 5.7X10-4 atm-cu m/mole(SRC), derived from its vapor pressure, 20.6 mm Hg(4), and water solubility, 5,400 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 5 hours and 5 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 9(SRC), from its log Kow of 1.94(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Hydrolysis is not expected to be an important process(SRC) based on estimated hydrolysis half-lives of 68 and 6.8 years at pHs 7 and 8, respectively(9). Ethyl methacrylate has reported biodegradation rates of 69% and 79% in 28 days utilizing the Closed Bottle test(10,11) indicating that it is readily biodegradable in water(SRC).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 17(SRC), determined from a structure estimation method(2), indicates that ethyl methacrylate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 5.7X10-4 atm-cu m/mole(SRC), derived from its vapor pressure, 20.6 mm Hg(4), and water solubility, 5,400 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 5 hours and 5 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 9(SRC), from its log Kow of 1.94(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Hydrolysis is not expected to be an important process(SRC) based on estimated hydrolysis half-lives of 68 and 6.8 years at pHs 7 and 8, respectively(9). Ethyl methacrylate has reported biodegradation rates of 69% and 79% in 28 days utilizing the Closed Bottle test(10,11) indicating that it is readily biodegradable in water(SRC).

Adverse EffectsNeurotoxin - Other CNS neurotoxin
Exposure RoutesThe substance can be absorbed into the body by inhalation of its vapour.
Toxicity Summary · 2 件

Based on the available data on the formulation of nail products containing Ethyl Methacrylate, the CIR Expert Panel concludes that this ingredient is safe as used when application is accompanied by directions to avoid skin contact because of the sensitizing potential of Ethyl Methacrylate.

Safe for use in cosmetics, with qualifications

Signs and Symptoms · 4 件

Sore throat. Cough.

Redness. Pain.

Watering of the eyes. Redness. Pain.

Vomiting. Abdominal pain. Diarrhoea. Nausea.

Soil Adsorption/Mobility · 1 件

Using a structure estimation method based on molecular connectivity indices(1), the Koc of ethyl methacrylate can be estimated to be 17(SRC). According to a classification scheme(2), this estimated Koc value suggests that ethyl acrylate is expected to have very high mobility in soil.

Human Toxicity Excerpts · 5 件

/HUMAN EXPOSURE STUDIES/ ... In 542 dermatitis patients given covered patch tests with 1% EMA or 1% nBMA in petrolatum, one individual responded to EMA and another to both EMA and nBMA ... No reactions were seen in 22 contact dermatitis patients given 24-hr covered patch tests with esters within the category at a concentration of 1% in petrolatum ... The contact dermatitis of many of the tested individuals was attributed to (meth)acrylate exposure ... The prevalence of positive clinical challenge responses /was reported/ in dental clinicians that had been referred with dermatitis and suspected of having allergy to (meth)acrylates as 1.2% (51/4221) for MMA, 0.7% (16/2323) for EMA and 0.3% (1/347) for BMA ... The prevalence in a similar, pre-selected clinical cohort /was reported/ as 0.8% (9/1161) for MMA and 0.3% (2/625) for EMA ... The prevalence of positive clinical challenge tests in patients referred with dermatitis with previous contact with (meth)acrylates was reported as 4.8% (17/352) for MMA, 4.4% (11/246) for EMA and 0.6% (2/331) for BMA ... Cross-reactivity with common acrylates (i.e. between methacrylates and acrylates) has not been observed ... and methacrylic acid, the common hydrolysis product for these methacrylate esters, is not a contact allergen ... /Short chain alkyl-methacrylate esters/

/HUMAN EXPOSURE STUDIES/ Ethyl Methacrylate was tested on 542 dermatitis patients using either the A1-Test (Imeco Agency, Sweden) or the Finn Chamber method. Each subject was exposed for 48 hours to 1% Ethyl Methacrylate in petrolatum, and scoring was conducted at 48 and 96 hours. Only one subject developed signs of irritation. Four subjects who were sensitive to methyl methacrylate were also tested with Ethyl Methacrylate. No cross-reactions were observed ...

/HUMAN EXPOSURE STUDIES/ ... In 542 dermatitis patients given covered patch tests with 1% EMA or 1% nBMA in petrolatum, one individual responded to EMA and another to both EMA and nBMA ... No reactions were seen in 22 contact dermatitis patients given 24-hr covered patch tests with esters within the category at a concentration of 1% in petrolatum ... The contact dermatitis of many of the tested individuals was attributed to (meth)acrylate exposure ... The prevalence of positive clinical challenge responses /was reported/ in dental clinicians that had been referred with dermatitis and suspected of having allergy to (meth)acrylates as 1.2% (51/4221) for MMA, 0.7% (16/2323) for EMA and 0.3% (1/347) for BMA ... The prevalence in a similar, pre-selected clinical cohort /was reported/ as 0.8% (9/1161) for MMA and 0.3% (2/625) for EMA ... The prevalence of positive clinical challenge tests in patients referred with dermatitis with previous contact with (meth)acrylates was reported as 4.8% (17/352) for MMA, 4.4% (11/246) for EMA and 0.6% (2/331) for BMA ... Cross-reactivity with common acrylates (i.e. between methacrylates and acrylates) has not been observed ... and methacrylic acid, the common hydrolysis product for these methacrylate esters, is not a contact allergen ... /Short chain alkyl-methacrylate esters/

Artificial Pollution Sources · 1 件

Ethyl methacrylate's production and use in acrylic polymers used to build automotive, aerospace, and furniture components, and in the manufacture of paint and coatings; in ethyl methacrylate polymers used in making dentures, contact lenses, and artificial fingernails(1); and as a chemical intermediate(2) may result in its release to the environment through various waste streams(SRC).

Environmental Biodegradation · 1 件

AEROBIC: In a Closed Bottle test, ethyl methacrylate released 69% of theoretical carbon dioxide evolution after 28 days(1). Ethyl methacrylate has been listed as being "well biodegradable" in the Japanese MITI test which utilizes 100 ppm test compound incubated at 25 °C for 2 weeks in activated sludge at 30 ppm(2). Ethyl methacrylate was found to biodegrade 79% in 28 days using the OECD 301D method, classifying it as readily biodegradable(3).

Environmental Bioconcentration · 1 件

An estimated BCF of 9 was calculated in fish for ethyl methacrylate(SRC), using a log Kow of 1.94(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

Volatilization from Water/Soil · 1 件

The Henry's Law constant for ethyl methacrylate is estimated as 5.7X10-4 atm-cu m/mole(SRC) derived from its vapor pressure, 20.6 mm Hg(1), and water solubility, 5,400 mg/L(2). This Henry's Law constant indicates that ethyl methacrylate is expected to volatilize from water surfaces(3). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(3) is estimated as 5 hours(SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(3) is estimated as 5 days(SRC). Ethyl methacrylate's estimated Henry's Law constant indicates that volatilization from moist soil surfaces may occur(SRC). The potential for volatilization of ethyl methacrylate from dry soil surfaces may exist(SRC) based upon its vapor pressure(1).

法規制情報

RCRA Requirements · 1 件

U118; As stipulated in 40 CFR 261.33, when ethyl methacrylate, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5).

TSCA Requirements · 1 件

All persons who manufacture (including import or manufacture as a byproduct) or process or intend to manufacture or process one or more of the substances in paragraph c of this section, other than as an impurity, after July 29, 1988, to the end of the reimbursement period shall submit letters of intent to conduct testing, submit study plans, conduct tests, and submit data, or submit exemption applications for those substances they manufacture or process, or intend to manufacture or process, as specified in this section, subpart A of this part, and parts 790 and 792 of this chapter for single-phase rulemaking. Ethyl methacrylate is included on this list. Required testing: hydrolysis.

CERCLA Reportable Quantities · 1 件

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 1000 lb or 454 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV.D.3.b).

State Drinking Water Guidelines(FL) FLORIDA 630 ug/L

安全データ

wgk
1
tsca
TSCA listed
rtecs
OZ4550000
ridadr
UN 2277 (ETHYL METHACRYLATE, STABILIZED)
毒性
LD50 orally in Rabbit: 14600 mg/kg LD50 dermal Rabbit > 9130 mg/kg
hs_code
29161490
risk_code
11-36/37/38-43
化審法
(2)-1039
消防法
危険物第4類第一石油類(非水溶性)
hazard_code
F,Xi
safety_code
9-16-29-33
hazard_class
3
packing_group
II
自然発火温度
771 °F
Hazard Classifications
Eye Irrit. 2Flam. Liq. 2Skin Irrit. 2Skin Sens. 1STOT SE 3
ストレージクラス
3 - Flammable liquids
有毒物質データの
97-63-2(Hazardous Substances Data)

Butyl or ethyl methacrylate copolymers with hydrophilic hydroxyethyl methacrylate & relatively large amounts of the cross-linking agent triethylene glycol dimethacrylate produces hard hydrophilic polymers that can be machined into hard contact lens with wettable surfaces.

Impurities · 1 件

Typical impurities include Methyl Acrylic Acid (MAA) (CAS 79-41-4) or MMA (CAS 80-62-6) (depending whether the direct esterification or trans-esterification route is used), the unreacted alcohol and water. In the case of EMA produced by the trans-esterification route, methyl- and ethyl acetate are present as minor impurities rather than ethanol.

U.S. Production · 4 件

2023: 2,500,000 - <4,000,000 lb

2-Propenoic acid, 2-methyl-, ethyl ester is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#3108]

Production volume for non-confidential chemicals reported under the 2006 Inventory Update Rule. Chemical: 2-Propenoic acid, 2-methyl-, ethyl ester. Aggreated National Production Volume: 1 to < 10 million lbs.

Consumption Patterns · 2 件

Automotive coatings 63%, nail sculpturing 16%, inks 11%, dental products 7%, others 3%

The most important products prepared from methacrylate compounds are polymers. The physical properties of polymers of methacrylate esters can be modified for different uses by suitable changes in the alkyl portion of the molecule, eg, by varying carbon chain length or by introducing a functional group. The largest use of methacrylates is in plastics. /Methacrylate compounds/

Consumer UsesNot Known or Reasonably Ascertainable
Industry UsesFiller
Methods of Manufacturing · 3 件

Reaction of methacrylic acid or methyl methacrylate with ethyl alcohol in the presence of a mineral acid.

... Made by a reaction between ethanol and methyl methacrylate (transesterification). The catalyst is sodium alcoolate. Extraction by methanol.

Commercial production of ... methacrylates, which began in ... 1933 ... from acetone cyanohydrin (ACN) involved conversion of acetone cyanohydrin to alpha-hydroxybutyrate ester followed by dehydration to the methacrylate with phosphorus pentachloride (PCl5). In 1934, a process was patented for converting acetone cyanohydrin to methacrylamide sulfate which is hydrolyzed & esterfied to the methacrylate ester; this process forms the basis for all contemporary commercial methacrylate production. /Methacrylates/

Formulations/Preparations · 4 件

Grade: Technical (inhibited).

Typical inhibitor, 15 ppm monomethyl ether of hydroquinone

Commercial products contain hydroquinone methyl ester or similar polymerization inhibitors.

Rhoplex AC-33 (Rohm and Haas)

Household ProductsInformation on 2 consumer products that contain ethyl methacrylate in the following categories is provided:
Use Classification · 2 件

Fragrance Ingredients

Cosmetics -> Viscosity controlling

General Manufacturing Information · 6 件

All Other Basic Organic Chemical Manufacturing

2-Propenoic acid, 2-methyl-, ethyl ester: ACTIVE

Alkyl mercury compounds have been used as seed disinfectants and for fungicides. They have also been used in organic synthesis. /Mercury alkyl compounds/

... Polymerized esters /of methacrylic acids/ ... especially the methyl, ethyl, and butyl esters, are known under trade names of "lucite", "plexiglass", and "perspex" ... widely used as substitutes for glass ...

Methacrylic acid ... was prepared in 1865 from ethyl methacrylate which was obtained by dehydrating ethyl alpha-hydroxyisobutyrate.

Soft polymers for coating dental prostheses consist of copolymers of 10-50% of an alkyl or alkoxyalkyl ester of acrylic or methacrylic acid & 50-90% of a polymerizable butadiene polymer having an average of approx 2 ethylenically unsaturated end groups. At one step in preparation of the soft polymer, the resultant resin was mixed with 30 wt % ethyl methacrylate & the mixture combined with a dispersion of benzoyl peroxide in oleic acid. The composition was placed on dental prothesis in a thin layer & hardened overnight in a dry oven at 100 °C.

応用分野 · 4 件

用途塗料用樹脂、接着剤、歯科材料

説明Ethyl Methacrylate is the ester of ethyl alcohol and methacrylic acid. Other chemical names for this compound are Ethyl 2- Methyl-2-Propenoate; 2-Methyl-2-Propenoic Acid, Ethyl Ester; 2-Propenoic Acid, 2-Methyl-, Ethyl Ester; and Methyacrylic Acid, Ethyl Ester. It is a colorless liquid with a melting point below -75℃, a boiling point of 119℃, and a specific gravity of 0.911. It has a molecular weight of 114.14 Da, a refractive index (n, 25/D) of 1.4116, and a flash point (OC) of 70℃. Ethyl Methacrylate has an acrid acrylate odor and is soluble in alcohol and ether. It is readily polymerized and is chemically reactive. Ethyl Methacrylate monomer is very hydrophobic and poorly “wets” the hydrophilic keratin surface of the nail plate, requiring hydrophilic nail primers and additives to obtain sufficient adhesion[1].

使用Ethyl methacrylate can be manufactured via a reaction of methacrylic acid or methyl acrylate with ethanol. It is used primarily for manufacturing polymers and as a component of acrylic polymers for surface coatings and as a structural monomer for some artificial fingernail formulations.

一般的な説明A colorless moderately toxic liquid with an acrid odor. Flash point of 70°F. Boiling point 278°F. Vapors irritate the eyes and respiratory system. Less dense than water. Not soluble in water. Used to make polymers and other chemicals.

調製方法 · 2 件

Ethyl methacrylate can be manufactured via a reaction of methacrylic acid or methyl acrylate with ethanol.

純化方法Wash the ester successively with 5% aqueous NaNO2, 5% NaHSO3, 5% NaOH, then water. Dry it over MgSO4, add 0.2% (w/w) of phenyl-.-naphthylamine, and distil it through a short Vigreux column (p 11) [Schultz J Am Chem Soc 80 1854 1958]. [Beilstein 2 IV 1523.]

上流・下流製品情報

上流原料

アセトンシアンヒドリンメタクリル酸メタクリルアミド

下流製品

Leather lustering agentN-(3,5-ジクロロフェニル)-1,2-ジメチル-1,2-シクロプロパンジカルボキシミド2-Methyl-N-(4-sulfaMoyl-phenyl)-acrylaMide1-メチルシクロプロパンカルボン酸エチル(ジフルオロメタン)ホスホン酸ジエチルメタクリル酸 テトラヒドロフルフリルイソ酪酸イソプロピル3-(ベンジルアミノ)-2-メチルプロパン酸エチルメフェンピルジエチル

補足説明

定義本品は、メタクリル酸(*)とエタノール(*)のエステルであり、次の化学式で表される。参照表示名称:メタクリル酸, エタノール

/SIGNS AND SYMPTOMS/ ... Acrylates ... have the potential to cause respiratory symptoms, most commonly asthma.

For more Human Toxicity Excerpts (Complete) data for Ethyl methacrylate (15 total), please visit the HSDB record page.