基本情報
- 標準SMILES
Cc1cccc(C)n1- InChIKey
OISVCGZHLKNMSJ-UHFFFAOYSA-N- 分子式
- C7H9N
- 平均分子量
- 107.15 g/mol
- 単同位体質量
- 107.07349929
概要
Lutidine appears as a colorless liquid with a peppermint odor. Less dense than water. Vapors heavier than air. Produces toxic oxides of nitrogen during combustion. Used to make other chemicals.
名称と識別子
- 優先名称
- 2,6-Lutidine
- IUPAC
- 2,6-dimethylpyridine
- 現地名
- 2,6-ルチジン
- 英語名
- 2,6-Lutidine
- 分子式
- C7H9N
- 分子量
- 107.15
名称と別名
名称をさらに表示
データベース識別子
- CAS
108-48-5- PubChem CID
- 7937
- DTXSID
DTXSID7051557- ChEMBL
CHEMBL22976- ChEBI
CHEBI:32548- UNII
- 15FQ5D0T3P
- EC Number
- 203-587-3
- Nikkaji
- J5.078D
物性
構造計算による物性
- XLogP
- 1.7
- 極性表面積
- 12.9 Ų
- 水素結合供与体数
- 0
- 水素結合受容体数
- 1
- 回転可能結合数
- 0
- 重原子数
- 8
- 形式電荷
- 0
- 複雑度
- 62.8
実験および物理化学的性質
LogP
log Kow = 1.68
1.68
1.63
Density
0.9252 @ 20 °C/4 °C
DENSITY: 0.942 @ 0 °C/4 °C
0.917-0.923
0.9252 @ 20°C
Solubility
Slightly soluble in ethanol; soluble in ethyl ether and acetone
Sol in water (% wt/wt): 27.2% @ 45.3 °C; 18.1% @ 48.1 °C; 12.1% @ 57.5 °C; 9.5% @ 74.5 °C; miscible with dimethylformamide and tetrahydrofuran
In water, 3.00X10+5 mg/l @ 34 °C
300 mg/mL at 34 °C
Soluble in water; Slightly soluble in fat
Soluble (in ethanol)
Boiling Point
144 °C @ 760 mm Hg
143.00 to 145.00 °C. @ 760.00 mm Hg
143-145 °C
144 °C @760 [mm Hg]
物理化学的性質
- 融点
- -6 °C · -6 °C (lit.)
- 沸点
- 143 · 143-145 °C (lit.)
- 比重(密度)
- 0.92 g/mL · 0.92 g/mL at 25 °C (lit.)
- 蒸気圧
- 5.5 hPa · 5.5 hPa (20 °C)
- FEMA
- 3540 · 3540 | 2,6-DIMETHYLPYRIDINE
- 屈折率
- 20 · n20/D 1.497(lit.)
- 闪点
- 92 °F · 92 °F
- 貯蔵温度
- 20 °C · −20°C
- 溶解性
- Chloroform (Soluble), Methanol (Slightly)
- 外見
- 液体
- 酸解離定数(Pka)
- 6.65 · 6.65(at 25℃)
- 色
- クリア
- 臭い (Odor)
- 1 %。ナッツっぽいアミン · ジプロピレングリコール中1.00%。ナッツっぽいアミン ウッディなパンっぽい ココアオイリー
- においのタイプ
- ナッティ
- 由来生物
- synthetic
- 水溶解度
- 40 g/100mL · 40g/100mL(20℃)
- 比熱容量
- 1.73 J/ · Cp(liquid): 1.73 J/(g·K), at 25℃
- JECFA Number
- 1317 · 1317
- Merck
- 14 · 14,5616
- BRN
- 105690 · 105690
- Henry's Law Constant
- 9.2 · 9.2×10-1 mol/(m3Pa) at 25℃, Brockbank (2013)
- Dielectric constant
- 7.33 · 7.3300000000000001
- 安定性
- 安定。可燃性。強力な酸化剤、酸塩化物、酸、クロロホルメートとは相容れない。防湿。
- 主な用途
- フレーバーそして香料
- InChI
- 1S/C7H9N/c1-6-4-3-5-7(2)8-6/h3-5H,1-2H3
- InChIKey
- OISVCGZHLKNMSJ-UHFFFAOYSA-N
- SMILES
- Cc1cccc(C)n1
- LogP
- 0.12 at · 0.12 at 25℃
- CAS データベース
- 108 · 108-48-5(CAS DataBase Reference)
- NISTの化学物質情報
- 2 · Pyridine, 2,6-dimethyl-(108-48-5)
- EPAの化学物質情報
- 2 · 2,6-Dimethylpyridine (108-48-5)
化学的性質
化学的特性Colorless to yellow liquid
安全と法規制
GHS分類
GHS Classification
Warning
H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]
P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P330, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)
Aggregated GHS information provided per 338 reports by companies from 16 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Warning
H226: Flammable liquid and vapor [Warning Flammable liquids]
危険有害性情報
Regulatory Information
Chemical: Pyridine, 2,6-dimethyl-
Commission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)
Pyridine, 2,6-dimethyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Pyridine, 2,6-dimethyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
Status: Active Update: 28-10-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/33333
Pyridine, 2,6-dimethyl-: HSNO Approval: HSR001389 Approved with controls
Hazards Summary
Emergency treatment: Pyridine; Pyridine is an irritant that causes CNS depression after ingestion of 1/2 cup or inhalation of 6-12 ppm; It can cause liver and kidney injury; [HSDB] Safe when used as a flavoring agent in food; [JECFA] An irritant; [MSDSonline] See Pyridine.
Reactivity Profile
LUTIDINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
Hazard Classes and Categories
Flam. Liq. 3 (100%)
Flammable liquids - Category 3
CSL Reaction Information
CSL00111
WATER + Mercury(II) perchlorate hydrate + 2,6 lutidine + TETRAHYDROFURAN
Explosion tetrahydrofuran, water, 2,6 lutidine, and mercury perchlorate hydrate
M (up to 100g)
dithiane hydrolysis
The reaction chemicals were scaled up, but the amount of solvent was not scaled up to an equivalent proportion. The amount of material used in the reaction was approximately 20 times more concentrated than the quantity specified in the literature. Electronic software was used to calculate the quantities of all reactants but not the quantity of solvent. Additionally, the lesser amount of solvent used in this reaction made it difficult for the magnetic stirrer bar to effectively mix
安全と保護具
Disposal Methods
SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
Protective Action Criteria (PAC)
3.1 [ppm]
34 [ppm]
200 [ppm]
毒性情報
Environmental Fate
TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 200(SRC), determined from a measured log Kow of 1.68(2) and a regression-derived equation(3), indicates that 2,6-lutidine is expected to have moderate mobility in soil(SRC). The pKa of 2,6-lutidine is 6.6(4), which indicates that 2,6-lutidine will partially exist in the protonated form in moist soils and cations adsorb to soil surfaces more strongly than neutral compounds(SRC). Volatilization of the neutral species of 2,6-lutidine from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 1.04X10-5 atm-cu m/mole(5), but the protonated form will not volatilize. The potential for volatilization of 2,6-lutidine from dry soil surfaces may exist based upon a vapor pressure of 5.65 mm Hg(6). 2,6-Lutidine biodegrades in soils under aerobic conditions(7). The half-life of 2,6-lutidine was approximately 1 month in an unpolluted surface soil under aerobic conditions with 100% degradation observed after 3 months(7) in a second, 2,6-lutadine was completely degraded in 32 days(8). Little degradation was observed under denitrifying and sulfate-reducing conditions(7).
AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 200(SRC), determined from a measured log Kow of 1.68 (2) and a regression-derived equation(3), indicates that 2,6-lutidine is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 1.04X10-5 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 2 and 31 days, respectively(SRC). The pKa of 2,6-lutidine is 6.6(5), which indicates that 2,6-lutidine will partially exist in the protonated form in water and cations will not volatilize(SRC). According to a classification scheme(6), an estimated BCF of 4(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). 2,6-Lutidine was shown to biodegrade under aerobic conditions in soil (especially polluted soil), but the rate of degradation was slower under anaerobic conditions(8); similar biodegradation in water is expected. 2,6-Lutidine was degraded approximately 30% over the course of a 35 day incubation period in column experiments using contaminated groundwater from a coal tar producing chemical facility as inoculum(9).
ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2,6-lutidine, which has a vapor pressure of 5.65 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2,6-lutidine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 6 days(SRC), calculated from its rate constant of 2.8X10-12 cu cm/molecule-sec at 25 °C (SRC) determined using a structure estimation method(3).
Effluent Concentrations
2,6-Lutidine was detected in oil shale retort water in Australia at a concn of 3 mg/l(1). Effluent from a municipal treatment plant in Hamilton, Ontario released 2,6-lutidine at a rate of 0.42 kg/day(2). Unspecified isomers of lutidine were detected in feedwater and permeate water from an abandoned creosote manufacturing plant in Pensacola, FL at concns of 2.48 and 0.032 mg/l, respectively(3).
Soil Adsorption/Mobility
The Koc of 2,6-lutidine is estimated as 200(SRC), using a measured log Kow of 1.68(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that 2,6-lutidine is expected to have moderate mobility in soil. The pKa of 2,6-lutidine is 6.6(4), which indicates that 2,6-lutidine will partially exist in the protonated form in moist soils and cations adsorb to soil surfaces more strongly than neutral compounds(SRC).
Environmental Biodegradation
An initial concn of 214 ppm 2,6-lutidine incubated in a Fincastle silt loam, was degraded 19, 22.2, 29.5, 42.4, 57.9 and 100% after 1, 2, 4, 8, 16 and 32 days, respectively(1). Mixed cultures isolated from a polluted soil were shown to degrade 2,6-lutidine(2). The half-life of 2,6-lutidine was approximately 1 month in an unpolluted surface soil under aerobic conditions with 100% degradation observed after 3 months, while little degradation was observed under denitrifying and sulfate reducing conditions(3). The half-life was about 0.5 months in polluted surface and subsurface soils with 100% degradation observed after 1 month(3). 2,6-Lutidine was degraded approximately 30% during a 35 day incubation period in column experiments using contaminated groundwater from a coal tar producing chemical facility as inoculum(4). The half-life of 2,6-lutidine in polluted subsurface sediments was 6 days(4).
Environmental Bioconcentration
An estimated BCF of 4 was calculated for 2,6-lutidine(SRC), using a log Kow of 1.68(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
Volatilization from Water/Soil
The Henry's Law constant for 2,6-lutidine is 1.04X10-5 atm-cu m/mole(1). This Henry's Law constant indicates that 2,6-lutidine is expected to volatilize from water surfaces(2). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(2) is estimated as 2 days (SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(2) is estimated as 31 days(SRC). 2,6-Lutidine's Henry's Law constant(1) indicates that volatilization from moist soil surfaces may occur(SRC). The pKa of 2,6-lutidine is 6.6(3), which indicates that 2,6-lutidine will partially exist in the protonated form in water and moist soils and cations will not volatilize(SRC). 2,6-Lutidine may volatilize from dry soil surfaces(SRC) based on its vapor pressure of 5.65 mm Hg at 25 °C(4).
Non-Human Toxicity Excerpts
...LUTIDINES...CAUSE SYMPTOMS RESEMBLING THOSE OBSERVED WITH PYRIDINE. THESE ARE LARGELY NONSPECIFIC & INCLUDE WEAKNESS, ATAXIA, DIARRHEA, & UNCONSCIOUSNESS. ... MAJORITY OF DERIV...ARE PRIMARY IRRITANTS & PENETRATE INTACT GUINEA PIG SKIN READILY. ... CAUSE...INTENSE SKIN & EYE IRRITATION. /PYRIDINE DERIVATIVES/
INHALATION OF 7500 PPM CONCN VAPOR OF 2,6-LUTIDINE BY RATS CAUSED 100% MORTALITY IN 1.2 HR.
IN DOGS WITH A UREA LOAD, IV ADMIN OF 2,6-LUTIDINE MARKEDLY INCR URINE VOL & UREA CLEARANCE.
Environmental Abiotic Degradation
The rate constant for the vapor-phase reaction of 2,6-lutidine with photochemically-produced hydroxyl radicals has been estimated as 2.8X10-12 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 6 days at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). The pKa of 2,6-lutidine is 6.6(2), which indicates that 2,6-lutidine will partially exist in the protonated form in the environment(SRC). Analogous 3,5-lutidine has a weak absorption band that extends into the environmental UV spectrum(3), which suggests that direct photolysis is not likely to occur for alkylated pyridines(SRC).
安全データ
- F
- 8
- wgk
- 3
- tsca
- TSCA listed
- rtecs
- OK9700000
- ridadr
- UN 1993 3/PG 3
- 毒性
- LD50 orally in Rabbit: 400 mg/kg LD50 dermal Rabbit > 1000 mg/kg
- hs_code
- 29333999
- risk_code
- 10-22-36/37/38-20/21/22
- 化審法
- (5)-712
- 消防法
- 危-4-2-III
- hazard_code
- Xn,F,Xi
- hazard_note
- Irritant/Flammable
- safety_code
- 26-36/37-16-36-36/37/39
- hazard_class
- 3
- packing_group
- III
- Hazard Classifications
- Acute Tox. 4 OralEye Irrit. 2Flam. Liq. 3Skin Irrit. 2
- ストレージクラス
- 3 - Flammable liquids
- 有毒物質データの
- 108-48-5(Hazardous Substances Data)
化学と産業
薬理情報
用途と製造
Uses
Used as a chemical intermediate for pharmaceuticals, resins, dyestuffs, rubber accelerators, and insecticides; [HSDB]
Chemical int for pharmaceuticals, resins, dyestuffs, rubber accelerators, insecticides
U.S. Exports
(1972) No Data
(1975) No Data
(1986) No Data
U.S. Imports
(1972) No Data
(1975) 1.30X10+8 GRAMS (ALL LUTIDINES)
(1986) No Data
U.S. Production
2023: 9,700 lb
(1972) PROBABLY GREATER THAN 4.54X10+5 GRAMS
(1986) No Data
Methods of Manufacturing
Isolated from basic fraction of coal tar: Heap et al, J Am Chem Soc 43: 1936 (1921); from bone oil fraction: Ladenburg, Roth, Ber 18: 51 (1885). Synthesis from ethyl acetoacetate, formaldehyde and ammonia: Singer, McElvain, Org Synth Coll Vol 2, 214 (1943).
Use Classification
Fragrance Ingredients
Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes
Flavoring Agents -> JECFA Flavorings Index
Flavouring Agent -> FLAVOURING_AGENT -> JECFA Functional Classes
General Manufacturing Information
Pesticide, Fertilizer, and Other Agricultural Chemical Manufacturing
Pyridine, 2,6-dimethyl-: ACTIVE
応用分野
用途化学医薬品の中間体、樹脂、染料、ゴム加硫促進剤、殺虫剤
天然物の起源Reported found in bread, tea, peppermint oil, cheeses, chicken, beef, pork, beer, sherry, whiskies, cocoa, coffee, tea, oatmeal, rice bran, buckwheat and malt.
使用2,6-Lutidine is used as a solvent in organic synthesis and as a sterically hindered mild base. It is also used as a vulcanization accelerator for dyes, resins and rubber. It also acts as a food additive.
一般的な説明A colorless liquid with a peppermint odor. Flash point 92°F. Less dense than water. Vapors heavier than air. Produces toxic oxides of nitrogen during combustion. Used to make other chemicals.
調製方法
純化方法Likely contaminants include 3-and 4-picoline (similar boiling points). However, they are removed by using BF3, with which they react preferentially, by adding 4mL of BF3 to 100mL of dry fractionally distilled 2,6-lutidine and redistilling. Distillation of commercial material from AlCl3 (14g per 100mL) can also be used to remove picolines (and water). Alternatively, lutidine (100mL) can be refluxed with ethyl benzenesulfonate (20g) or ethyl p-toluenesulfonate (20g) for 1hour, then the upper layer is cooled, separated and distilled. The distillate is refluxed with BaO or CaH2, then fractionally distilled through a glass helices-packed column. 2,6-Lutidine can be dried with KOH or sodium or by refluxing with (and distilling from) BaO, prior to distillation. For purification via its picrate, 2,6-lutidine, dissolved in absolute EtOH, is treated with an excess of warm ethanolic picric acid. The precipitate is filtered off, recrystallised from acetone (to give m 163-164.5o (166-167o), and partitioned between ammonia and CHCl3/diethyl ether. The organic layer, after washing with dilute aqueous KOH, is dried with Na2SO4 and fractionally distilled. [Warnhoff J Org Chem 27 4587 1962.] Alternatively, 2,6-lutidine can be purified via its urea complex, as described under 2,3-lutidine. Other purification procedures include azeotropic distillation with phenol [Coulson et al. J Appl Chem (London) 2 71 1952], fractional crystallisation by partial freezing, and vapour-phase chromatography using a 180-cm column of polyethylene glycol-400 (Shell, 5%) on Embacel (May and Baker) at 100o, with argon as carrier gas [Bamford & Block J Chem Soc 4989 1961]. The hydrochloride has m 235-237o, 239o (from EtOH). [Beilstein 20 II 160, 20 III/IV 2776, 20/6 V 32.]
上流・下流製品情報
上流原料
下流製品
サプライヤー50 社
補足説明
定義ChEBI: A member of the class of methylpyridines that is pyridine carrying methyl substituents at positions 2 and 6.
関連反応
関連ノート
読み込み中…