化工社化工社 化学情報印刷レポート · 研究参考用
マロン酸
マロン酸 · プロパン二酸 · 1,3-プロパン二酸 · メタンジカルボン酸 · PROPANEDIOIC ACID · MAAC · Daucic acid · CH2(COOH)2
識別子と物理属性
| CAS No. | 141-82-2 |
|---|---|
| 分子式 | C3H4O4 |
| 平均分子量 | 104.06 g/mol |
| 単同位体質量 | 104.0109586 g/mol |
| SMILES | O=C(O)CC(=O)O |
| InChIKey | OFOBLEOULBTSOW-UHFFFAOYSA-N |
| PubChem CID | 867 |
| ChEMBL | CHEMBL7942 |
| ChEBI | CHEBI:30794 |
| EC No. | 205-503-0 |
| DTXSID | DTXSID7021659 |
| 現地名 | マロン酸 |
化学・物理的性質
| XLogP | -0.8 |
|---|---|
| 極性表面積 | 74.6 |
| 水素結合供与体数 | 2 |
| 水素結合受容体数 | 4 |
| 回転可能結合数 | 2 |
| 重原子数 | 7 |
| 形式電荷 | 0 |
| 複雑度 | 83 |
| LogP（分配係数） | -0.81log Kow = -0.81-0.91/-0.18 (calculated) |
| 密度 | 1.63 (NTP, 1992) - Denser than waterwill sinkDensity: 1.619 g/cu cm at 10 °C1.6 g/cm³1.63 @ 10°C1.619 g/cm3 at 25 °C |
| Color/Form | White crystalsCrystalline powderColorless hygroscopic solid which sublimes in vacuum |
| 溶解度 | greater than or equal to 100 mg/mL at 72 °F (NTP, 1992)763000In water, 6.23X10+5 mg/L at 25 °CIn water, 7.66X10+5 mg/L at 20 °C (pH 1-10), EU Guideline Method A.6 (flask method)One gram dissolves in: 0.65 mL water, about 2 mL alcohol, 1.1 mL methanol, 3 mL propyl alcohol, 13 mL ether, 7 mL pyridine763.0 mg/mL1M NaOH：可溶100mg/mL、透明～やや濁り、無色～微黄色1400g/L（20℃） |
| 沸点 | 284 °F at 760 mmHg (decomposes) (NTP, 1992)Decomposes above 140 °C140℃(decomposition) |
| Decomposition | Hazardous decomposition products formed under fire conditions. - Carbon oxides.When heated to decomposition it emits acrid smoke and irritating fumes.135 °C |
| 融点 | 276.1 °F (NTP, 1992)135135-137 °C135 °C132-135 °C (dec.) (lit.) |
| 蒸気圧 | 0.0015 [mmHg]2.7X10-6 mm Hg at 23 °C0-0.2Pa at 25℃ |
| Heat of Combustion | Molar heat of combustion: 864 kJ/mol |
| Heat of Vaporization | 92 kJ/mol |
| Physical Description | Malonic acid appears as white crystals or crystalline powder. Sublimes in vacuum. (NTP, 1992)Large CrystalsLiquidOther SolidWhite solid[ICSC] White crystals[Alfa Aesar MSDS]WHITE CRYSTALS. |
| Stability/Shelf Life | Stable under recommended storage conditions. |
| 屈折率 | 1.4780 |
| 引火点 | 157°C |
| 貯蔵条件 | Sealed in dry,Room Temperature |
| 外観・状態 | 液体 |
| pKa（酸解離定数） | 2.83(at 25℃) |
| 色 | 白い |
| pH | 3.17(1 mM solution)2.5(10 mM solution)1.94(100 mM solution) |
| Merck | 14,5710 |
| BRN | 1751370 |
| ヘンリー定数 | 2.4×108 mol/(m3Pa) at 25℃, Burkholder et al. (2019) |
| 安定性 | 安定。酸化剤、還元剤、塩基と相容れない。 |
| 化粧品成分の機能 | バッファリング |
| InChI | 1S/C3H4O4/c4-2(5)1-3(6)7/h1H2,(H,4,5)(H,6,7) |
| InChIKey | OFOBLEOULBTSOW-UHFFFAOYSA-N |
| SMILES | OC(=O)CC(O)=O |
| LogP（分配係数） | -0.81 |
| CAS データベース | 141-82-2(CAS DataBase Reference) |
| NISTの化学物質情報 | Malonic acid(141-82-2) |
| EPAの化学物質情報 | Propanedioic acid (141-82-2) |
化学的特性
Malonic acid is a white crystalline solid that decomposes at approximately 135°C. It has high solubility in water and oxygenated solvents and exhibits greater acidity than acetic acid, which has a pK value of 4.75. The pKa values for the loss of its first and second protons are 2.83 and 5.69, respectively. It is slightly soluble in pyridine. It can decompose to formic acid and carbon dioxide in case of potassium permanganate. Since that malonic acid generates carbon dioxide and water after heated without pollution problems, it can be directly used as aluminum surface treatment agent.
化学性质
マロン酸は常温で固体の結晶として存在し無色であり特有の酸味を持ちます水アルコールエーテルに溶解しやすく有機溶剤にも比較的溶けやすい性質を持っていますこの化合物は弱酸性を示しその酸性度は他のジカルボン酸と比較して中程度です
安全性と法規制
| GHS 分類 | This chemical does not meet GHS hazard criteria for 1.4% (6 of 443) of reports.DangerH302 (47.2%): Harmful if swallowed [Warning Acute toxicity, oral]H315 (28.2%): Causes skin irritation [Warning Skin corrosion/irritation]H318 (49.7%): Causes serious eye damage [Danger Serious eye damage/eye irritation]H319 (49%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]H335 (11.5%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposureRespiratory tract irritation]P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P305+P354+P338, P317, P319, P321, P330, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 443 reports by companies from 23 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.Reported as not meeting GHS hazard criteria per 6 of 443 reports by companies.There are 22 notifications provided by 437 of 443 reports by companies with hazard statement code(s).Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. |
|---|---|
| 規制情報 | Chemical: Propanedioic acidCommission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)Propanedioic acid is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Propanedioic acid are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 06-08-2021 https://echa.europa.eu/registration-dossier/-/registered-dossier/17333Malonic acid: Does not have an individual approval but may be used under an appropriate group standard |
| その他の安全情報 | IMAP assessments - Propanedioic acid: Human health tier I assessment |
| 火災危険 | Flash point data for this chemical are not availablehowever, it is probably combustible. (NTP, 1992) |
| 健康有害性 | SYMPTOMS: Symptoms of exposure to this compound include irritation of the skin, eyes, mucous membranes and upper respiratory tract. It can damage the skin and mucous membranes.ACUTE/CHRONIC HAZARDS: This compound may be harmful by inhalation, ingestion or skin absorption. It is a strong irritant. It can damage the skin and mucous membranes. When heated to decomposition it emits acrid smoke, irritating fumes and toxic fumes of carbon monoxide and carbon dioxide. (NTP, 1992) |
| 有害性の概要 | Members of the linear alkyl diacids category demonstrate no evidence of skin sensitizationNo effects to reproductive organs in repeated-dose studiesLow repeated-dose and developmental toxicityLow potential for genotoxicity and carcinogenicity[EPA ChAMP: Screening Level Hazard Characterization] A strong irritant[Merck Index] A skin and severe eye and respiratory tract irritant[ICSC] A strong irritant that may damage the skin and mucous membranes[NTP] An irritant that may cause serious eye injuryHarmful by ingestion[Alfa Aesar MSDS] |
| 反応性グループ | Acids, Carboxylic |
| Reactivity Profile | MALONIC ACID is a carboxylic acid. Carboxylic acids donate hydrogen ions if a base is present to accept them. They react in this way with all bases, both organic (for example, the amines) and inorganic. Their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. Neutralization between an acid and a base produces water plus a salt. Carboxylic acids with six or fewer carbon atoms are freely or moderately soluble in waterthose with more than six carbons are slightly soluble in water. Soluble carboxylic acid dissociate to an extent in water to yield hydrogen ions. The pH of solutions of carboxylic acids is therefore less than 7.0. Many insoluble carboxylic acids react rapidly with aqueous solutions containing a chemical base and dissolve as the neutralization generates a soluble salt. Carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. Such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. Even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in it to corrode or dissolve iron, steel, and aluminum parts and containers. Carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. The reaction is slower for dry, solid carboxylic acids. Insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. Flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. Carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Their reaction with carbonates and bicarbonates generates a harmless gas (carb |
| Chemical Dangers | The solution in water is a medium strong acid. Reacts with strong oxidants. |
| Air and Water Reactions | Water soluble. |
| Hazard Classes and Categories | Acute Tox. 4 (47.2%)Skin Irrit. 2 (28.2%)Eye Dam. 1 (49.7%)Eye Irrit. 2 (49%)STOT SE 3 (11.5%)Acute toxicity (Oral) - Category 4Serious eye damage/eye irritation - Category 2 |
| Skin, Eye, and Respiratory Irritations | A skin and severe eye irritant. |
| Critical Temperature and Pressure | Critical temperature: 805 K (estimated)critical pressure: 5640 kPa (estimated) |
| 消火 | Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used. (NTP, 1992)Use water spray, powder, foam, carbon dioxide. |
| 応急処置措置 | Fresh air, rest. Refer for medical attention.Remove contaminated clothes. Rinse skin with plenty of water or shower.First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.Rinse mouth. Refer for medical attention . |
| 応急処置 | EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.INHALATION: IMMEDIATELY leave the contaminated areatake deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be usedif not available, use a level of protection greater than or equal to that advised under Protective Clothing.INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992) |
| 安全保管 | Separated from bases and strong oxidants. |
| 消火手順 | Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary. |
| 保管条件 | Keep container tightly closed in a dry and well-ventilated place. Keep in a dry place. |
| 清掃方法 | ACCIDENTAL RELEASE MEASURESPersonal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Do not let product enter drains. Methods and materials for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. |
| 非火災時の漏出対応 | SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.STORAGE PRECAUTIONS: You should store this chemical under ambient temperatures, and keep it away from oxidizing materials. (NTP, 1992) |
| 処分方法 | SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air qualitypotential migration in air, soil or watereffects on animal, aquatic and plant lifeand conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging: Dispose of as unused product. |
| 漏出処分 | Sweep spilled substance into covered containers. Then wash away with plenty of water. |
| Preventive Measures | Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Further processing of solid materials may result in the formation of combustible dusts. The potential for combustible dust formation should be taken into consideration before additional processing occurs. Provide appropriate exhaust ventilation at places where dust is formed.ACCIDENTAL RELEASE MEASURESPersonal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Do not let product enter drains.Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.For more Preventive Measures (Complete) data for Malonic acid (6 total), please visit the HSDB record page. |
| Eye Prevention | Wear safety goggles. |
| 相互作用 | The present experiments were carried out to provide direct in vivo evidence for the involvement of c-Jun N-terminal kinase (JNK) in the induction of ischemic brain injury. Malonate, which produces lesions similar to those of focal ischemia-reperfusion by a reversible inhibition of succinate dehydrogenase in mitochondria, was injected into the left striatum in the rat brain without or with the simultaneous injection of a cell permeable peptidic JNK inhibitor, (L)-HIV-TAT48-57-PP-JBD20. Two regions of malonate-induced brain injury were visualized as a hyperintense region with surrounding hypointense regions by apparent diffusion coefficient mapping magnetic resonance imaging. The JNK inhibitor significantly counteracted both hyper- and hypointense regions at the early stage of brain injury. Histological examination clarified that the inhibitor suppressed the induction of coagulation necrosis and spongy degeneration at early and late stages. /Malonate/The acute and long-term effects of the local perfusion of 3,4-methylenedioxymethamphetamine (MDMA) and the interaction with the mitochondrial inhibitor malonate (MAL) were examined in the rat striatum. MDMA, MAL or the combination of MAL with MDMA was reverse dialyzed into the striatum for 8 h via a microdialysis probe while extracellular dopamine (DA) and serotonin (5-HT) were measured. One week later, tissue immediately surrounding the probe was assayed for DA and 5-HT tissue content. Local perfusion of MDMA increased DA and 5-HT release but did not produce long-term depletion of DA or 5-HT in tissue. Malonate also increased both DA and 5-HT release but, in contrast to MDMA, produced only long-term depletion of DA. The combined perfusion of MDMA/MAL synergistically increased the release of DA and 5-HT and produced long-term depletion of both DA and 5-HT in tissue. These results support the conclusion that DA, compared with 5-HT, neurons are more susceptible to mitochondrial inhibition. Moreover, MDMA, which does not normally produce DA depletion in the rat, exacerbated MAL-induced DA depletions. The effect of MDMA in combination with MAL to produce 5-HT depletion suggests a role for bio-energetic stress in MDMA-induced toxicity to 5-HT neurons. Overall, these results highlight the importance of energy balance to the function of DA and 5-HT neurons and to the toxic effects of MDMA. /Malonate/We examined whether creatine administration could exert neuroprotective effects against excitotoxicity mediated by N-methyl-D-aspartate (NMDA), alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) and kainic acid. Oral administration of 1% creatine significantly attenuated striatal excitotoxic lesions produced by NMDA, but had no effect on lesions produced by AMPA or kainic acid. Both creatine and nicotinamide can exert significant protective effects against malonate-induced striatal lesions. We, therefore, examined whether nicotinamide could exert additive neuroprotective effects with creatine against malonate-induced lesions. Nicotinamide with creatine produced significantly better neuroprotection than creatine alone against malonate-induced lesions. Creatine can, therefore, produce significant neuroprotective effects against NMDA mediated excitotoxic lesions in vivo and the combination of nicotinamide with creatine exerts additive neuroprotective effects. /Malonate/The mitochondrial inhibitors malonate and 3-nitropropionic (3NP) acid are potent neurotoxins in vivo. Administration of these compounds results in neuronal loss similar to that seen in Huntington's disease. Although the mechanism of cell death produced by these compounds likely involves activation of N-methyl-D-aspartate receptors, it remains unclear why the striatum demonstrates regional susceptibility to the toxicity of these and other mitochondrial poisons. We hypothesized that dopamine, a weak neurotoxin that occurs in high concentrations in the striatum, may contribute to the neuronal damage caused by mitochondrial inhibition. We investigated whether depletion of striatal dopamine using the catecholaminergic toxin 6-hydroxydopamine would attenuate lesions induced by mitochondrial inhibition. We found that dopamine depletion reduced significantly the extent of histological damage in the striatum elicited by both intraparenchymal injections of 0.8 micromol malonate and 20 mg/kg systemic administration of 3NP. These data suggest that dopamine or one of its metabolites may contribute to mitochondrial toxin-induced cell death. /Malonate/For more Interactions (Complete) data for Malonic acid (7 total), please visit the HSDB record page. |
| 生態毒性値 | LC50Species: Daphnia magna (Water Flea) age <24 hr larva, 1st instarConditions: freshwater, static, 22 °C, pH 7.7 (7.0-8.2 ug/L)Concentration: 275000 ug/L for 48 hr (95% confidence interval: 233000- 324000 ug/L)Species: Lepomis macrochirus (Bluegil)Conditions: freshwater, static, 21-25 °CConcentration: 150000 ug/L for 24 hr /formulated product/ |
| 環境中動態 | TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 4(SRC), determined from a structure estimation method(2), indicates that malonic acid is expected to have very high mobility in soil(SRC). Respective pKa1 and pKa2 values of 2.8 and 5.7(3), indicate this compound will exist almost entirely in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of malonic acid from moist soil surfaces is not expected to be an important fate process(SRC) due to ionization. Based on biodegradation screening results of analogous dicarboxylic acids (succinic acid and oxalic acid), malonic acid is expected to be readily biodegradable(3). In two 5-day BOD studies, malonic acid achieved 38 to 76.6% theoretical BODs(5,6).AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 4(SRC), determined from a structure estimation method(2), indicates that malonic acid is not expected to adsorb to suspended solids and sediment(SRC). Respective pKa1 and pKa2 values of 2.8 and 5.7(3), indicate this compound will exist almost entirely in the anion form in the environment and therefore, volatilization from water surfaces is not expected to be an important fate process(SRC). According to a classification scheme(4), an estimated BCF of 3(SRC), from its log Kow of -0.81(5) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Based on biodegradation screening results of analogous dicarboxylic acids (succinic acid and oxalic acid), malonic acid is expected to be readily biodegradable(3). In two 5-day BOD studies, malonic acid achieved 38 to 76.6% theoretical BODs(6,7). Malonic acid is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(8).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), malonic acid, which has a vapor pressure of 2.7X10-6 mm Hg at 23 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase malonic acid is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be 10 days(SRC), calculated from its rate constant of 1.6X10-12 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase malonic acid may be removed from the air by wet and dry deposition(SRC). Malonic acid absorbs weakly at wavelengths >290 nm(4) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). |
| 食品調査値 | Malonic acid has been identified in celery, parsnip, green pepper, tangerine, beet, oats, tabasco, chili, orange, grapefruit, lime, melon, cantaloupe, sunflower, barley, prickly pear, Indian fig, ginseng, black bean, kidney bean, green bean, peach, corn, and banana(1). |
| 暴露経路 | The substance can be absorbed into the body by inhalation and by ingestion. |
| 毒性の概要 | Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.orgIDENTIFICATION AND USE: Malonic acid is used in biochemical and cell studies, as well as in chemical synthesis. This acid is well known as a competitive inhibitor of succinic dehydrogenase, and has been used extensively in investigations of the tricarboxylic acid cycle. It can be used in veterinary medicine to prevent resorption of bone tissue in broiler chicks caused by disturbance of photoperiodism. HUMAN STUDIES: The influence of malonic acid on the proliferation rate of cultured human fetal skin fibroblasts was investigated. Addition of malonate stimulated fibroblast proliferation. The maximum stimulation occurred in the medium at the 0.01 mM concentration of malonic acid. When the cells were cultured in the medium with serum, the influence of malonate on the cells proliferation increased. ANIMAL STUDIES: Malonic acid (MA) is a reversible inhibitor of succinate dehydrogenase (SDH) which induces mitochondrial dysfunction followed by secondary excitotoxicity and apoptosis due to generation of reactive oxygen species. Intrastriatal injection of malonate results in both chemically induced hypoxia and striatal lesions that are similar to those seen in Huntington's disease and cerebral ischemia. Malonic acid was mildly irritating to skin in rats. In an in vitro eye irritation test, malonic acid was considered to be irritating. The behavioral effects of unilateral intrastriatal administration of malonate (0.6, 1.8 or 6 umol) in adult male rats have been reported. Low doses of malonate (1.8 umol) decreased exploratory activity and caused ipsiversive rotational behavior. High doses of malonate (6 umol) induced contralateral rotational behavior and convulsive episodes. Malonate-induced striatal toxicity was significantly reduced following lesions of either the glutamatergic or dopaminergic afferents to the striatum. Intrastriatal injection of malonate produced age-dependent striatal lesions, which were significantly greater in 4- and 12-month-old animals than in 1-month- |
| Average Daily Intake | Estimated intake of malonic acid: 3200 ug/person/day(1). |
| Plant Concentrations | Malonic acid occurrence in plants(1).Table: 5 of 31 Plants Listed [Table#8506] |
| Signs and Symptoms | Cough. Sore throat.Redness. Pain.Abdominal pain. Diarrhoea. Nausea. Vomiting. |
| Ongoing Test Status | EPA has released the Interactive Chemical Safety for Sustainability (iCSS) Dashboard. The iCSS Dashboard provides an interactive tool to explore rapid, automated (or in vitro high-throughput) chemical screening data generated by the Toxicity Forecaster (ToxCast) project and the federal Toxicity Testing in the 21st century (Tox21) collaboration. /The title compound was tested by ToxCast and/or Tox21 assays/[USEPAICSS Dashboard ApplicationAvailable from, as of August 9, 2018: http://actor.epa.gov/dashboard/]The following link will take the user to the National Toxicology Program (NTP) Test Status of Agents Search page, which tabulates the results and current status of tests such as "Short-Term Toxicity Studies", "Long-term Carcinogenicity Studies", "Developmental Studies", "Genetic Toxicology Studies", etc., performed with this chemical. Testing status for malonic acid is available.[Available from, as of August 9, 2018: https://ntpsearch.niehs.nih.gov/?e=True&ContentType=Testing+Status] |
| Effluent Concentrations | Based on monitoring at a Los Angeles roadway tunnel, the emission rate malonic acid was 14.0 ug/L of gasoline-equivalent burned(1). Malonic acid was detected in effluents from a kraft pulp mill bleach factory(2) and at a concentration of 8.1 mg/L in shale oil process retort water(3). |
| Soil Adsorption/Mobility | Using a structure estimation method based on molecular connectivity indices(1), the Koc of malonic acid can be estimated to be 4(SRC). According to a classification scheme(2), this estimated Koc value suggests that malonic acid is expected to have very high mobility in soil. Respective pKa1 and pKa2 values of 2.8 and 5.7(3), indicate this compound will exist almost entirely in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). |
| 水環境危害等級（WGK） | 1 |
| TSCA 収載状態 | TSCA listed |
| RTECS 番号 | OO0175000 |
| 輸送番号（UN） | 3261 |
| 毒性 | mouse,LD50,intraperitoneal,300mg/kg (300mg/kg),National Technical Information Service. Vol. AD277-689, |
| 税関コード | 29171910 |
| 危険文句（R） | 20/22-41-36/37/38-22 |
| 化審法 | (2)-912 |
| 危険表示 | Xn,Xi |
| 安全措置（S） | 26-36/39-37/39-36 |
| 包装等級 | III |
| 危険等級 | Eye Dam. 1 |
| 貯蔵分類 | 13 - Non Combustible Solids |
| 有害物質データ | 141-82-2(Hazardous Substances Data) |
用途
解説
マロン酸，無色の針状結晶．分解点135 ℃．pK1 2.837，pK2 5.693．水，エタノールに易溶，エーテル，ピリジンに可溶，ベンゼンに難溶．140 ℃ で分解して二酸化炭素と酢酸になる．アミノ酸，そのほかの有機合成にしばしば用いられるほか，酸の一次標準物質としてアルカリ標準液の標定にも用いられる．強い刺激性がある．LD50 1.54 g/kg(ラット，腹腔)．森北出版「化学辞典（第2版）
用途
医薬?香料?合成樹脂?接着剤原料
用途
有機合成原料、酸の一次標準(アルカリ標準液の標定)、金属イオンのマスキング剤。
説明
Malonic acid (MA), also known as propanedioic acid, is a dicarboxylic acid with structure CH2(COOH)2. It have three kinds of crystal forms, of which two are triclinic, and one is monoclinic. That crystallized from ethanol is white triclinic crystals.It decomposes to acetic acid and carbon dioxide at 140℃. It does not decompose at 1.067×103~1.333×103Pa vacuum, but directly sublimates. The ionised form of malonic acid, as well as its esters and salts, are known as malonates. For example, diethyl malonate is malonic acid's ethyl ester. The name originates from Latin malum, meaning apple.
使用
Malonic acid is used as an intermediate in the manufacture of barbiturates and other pharmaceuticals. It is a component used as a stabilizer in many high-end cosmetic and pharmaceutical products. Malonic acid is also used as building block in chemical synthesis, specifically to introduce the molecular group -CH2-COOH. It is used for the introduction of an acetic acid moiety under mild conditions by Knoevenagel condensation and subsequent decarboxylation.
一般的な説明
White crystals or crystalline powder. Sublimes in vacuum.
使用用途
マロン酸はリンゴに含まれていたことから、医療分野などで香料として使用されています。その他、カルボキシ基という官能基を持っていることから、合成樹脂やのような分野で、原料としても使われています。
製法・合成法
製造方法
Malonic acid is usually produced from chloroacetic acid.Reaction: The chloroacetic acid is added to the reaction kettle by adding sodium carbonate aqueous solution to generate sodium chloroacetate aqueous solution, and then 30% sodium cyanide solution is slowly added dropwise, and the reaction is carried out at a predetermined temperature to generate sodium cyanoacetate. After the cyanation reaction is completed, add sodium hydroxide for heating and hydrolysis to generate sodium malonate solution, concentrate, then dropwise add sulfuric acid for acidification to generate malonic acid, filter and dry to obtain the product.This method often does not produce a pure enough product or the pure product has an extremely low yield. Industrially, malonic acid is also produced by hydrolyzing dimethyl malonate or diethyl malonate. This manufacturing method is able to bring about a higher yield and purity, but the organic synthesis of malonic acid through these processes is extremely costly and environmentally hazardous.
純化方法
Crystallise malonic acid from *benzene/diethyl ether (1:1) containing 5% of pet ether (b 60-80o), wash with diethyl ether, then recrystallise it from H2O or acetone. Dry it under vacuum over conc H2SO4. [Beilstein 2 IV 1874.]