ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Hydrochloric Acid → 4-Ethoxy-1-(4-fluorophenyl)-2-oxo-1,2-dihydropyridine-3-carboxylic acid

HRID 1043039
印刷

反応式

HRID 1043039 の反応式
Cl.[CH2:2]([O:4][C:5]1[CH:10]=[CH:9][N:8]([C:11]2[CH:16]=[CH:15][C:14]([F:17])=[CH:13][CH:12]=2)[C:7](=[O:18])[C:6]=1[C:19]([O:21]CC)=[O:20])[CH3:3]>CCO>[CH2:2]([O:4][C:5]1[CH:10]=[CH:9][N:8]([C:11]2[CH:16]=[CH:15][C:14]([F:17])=[CH:13][CH:12]=2)[C:7](=[O:18])[C:6]=1[C:19]([OH:21])=[O:20])[CH3:3]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

4

反応物 2

HCID 313Hydrochloric AcidHCID 68735913Ethyl 4-ethoxy-1-(4-fluorophenyl)-2-oxo-1,2-dihydropyridine-3-carboxylate

生成物 1

HCID 585350974-Ethoxy-1-(4-fluorophenyl)-2-oxo-1,2-dihydropyridine-3-carboxylic acid収率 76.1%

試薬・触媒・溶媒 1

HCID 702Ethanol溶媒

反応条件

温度
62 °C

実験手順

At room temperature, 2.75 N HCl (7.7 L) was added to a solution of crude ethyl 4-ethoxy-1-(4-fluorophenyl)-2-oxo-1,2-dihydropyridine-3-carboxylate (1.1 kg) in EtOH (3.85 L). The mixture was heated for 10 hrs to 60-64° C. Next, the mixture was cooled to 50-54° C. and methanol was removed by vacuum distillation. The mixture was cooled to 20-25° C. and the pH was adjusted to 8.0 to 8.5 by addition of 30% sodium carbonate solution (8.5 L). The phases were separated and the aqueous layer was washed three times with DCM (4 L). Next, charcoal (0.7 kg) was charged to the aqueous layer and the layer was filtered through a celite bed. To the filtrate was added 1.5 N HCl until the pH had reached 2.0. The resulted slurry was stirred for 20 min at room temperature. The solids were filtered off, washed with water (15 L) and dried under vacuum at 50-55° C. until the loss on drying was less than 5 wt %. The crude product was suspended in ethyl acetate (5 L) and slurried for 15 min at 40° C. After cooling to room temperature, the solids were filtered off, washed with ethyl acetate (1 L) and dried at 40-45° C. under vacuum for 10 hrs to yield 4-ethoxy-1-(4-fluorophenyl)-2-oxo-1,2-dihydropyridine-3-carboxylic acid (0.76 kg; 58% yield for Steps 6 and 7).

後処理

  1. temperatureNext, the mixture was cooled to 50-54° C.
  2. custommethanol was removed by vacuum distillation
  3. temperatureThe mixture was cooled to 20-25° C.
  4. additionthe pH was adjusted to 8.0 to 8.5 by addition of 30% sodium carbonate solution (8.5 L)
  5. customThe phases were separated
  6. washthe aqueous layer was washed three times with DCM (4 L)
  7. additionNext, charcoal (0.7 kg) was charged to the aqueous layer
  8. filtrationthe layer was filtered through a celite bed
  9. additionTo the filtrate was added 1.5 N HCl until the pH
  10. filtrationThe solids were filtered off
  11. washwashed with water (15 L)
  12. customdried under vacuum at 50-55° C. until the loss
  13. customon drying
  14. waitslurried for 15 min at 40° C
  15. temperatureAfter cooling to room temperature
  16. filtrationthe solids were filtered off
  17. washwashed with ethyl acetate (1 L)
  18. customdried at 40-45° C. under vacuum for 10 hrs

出典と根拠

ORDレコード
ord-7dfc4ca640164e6a9604e66dd4d3ed19
出典データセット
uspto-grants-2013_10
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08558000B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート