ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Chromium → Chromic nitrate

HRID 1199630
印刷

反応式

HRID 1199630 の反応式
[Cr:1].[Co:2].[Ni:3].[N+:4]([O-:7])([O-:6])=[O:5].[Cr+3].[N+:9]([O-:12])([O-:11])=[O:10].[N+:13]([O-:16])([O-:15])=[O:14]>>[N+:4]([O-:7])([O-:6])=[O:5].[Cr+3:1].[N+:9]([O-:12])([O-:11])=[O:10].[N+:13]([O-:16])([O-:15])=[O:14].[O-2:5].[Cr+3:1].[Co+2:2].[Ni+2:3]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

5

反応物 3

HCID 23976ChromiumHCID 24598Chromic nitrateHCID 10261079Cobalt, compd. with nickel (1:1)

生成物 2

HCID 24598Chromic nitrateHCID 131716318Nickel-cobalt-chromium oxide

反応条件

温度
470 °C

実験手順

62.5 g of carboxymethyl cellulose was added to 2.5 liters of distilled water and the mixture was kneaded and deaerated to obtain a binder solution. To this binder solution was added 2.5 kg of nickel powder of about 3 μm in average particle size and the mixture was further kneaded and deaerated to obtain a slurry. A wire gauze of 40 meshes was passed through this slurry solution to deposit the slurry thereon and then this wire gauze was passed through a slit to adjust thickness and dried. Thereafter, the wire gauze was sintered at 850° C. in a hydrogen atmosphere to obtain a nickel porous sintered body. Then, an aqueous cobalt nitrate solution was prepared so that addition amount of cobalt based on nickel was 5 atom %. The above nickel porous sintered body was dipped in this aqueous cobalt nitrate solution for 15 minutes and then, was taken out, followed by removing an excess solution and drying. This was sintered at 700° C. in a hydrogen atmosphere to obtain a nickel-cobalt porous sintered body. Another aqueous chromium nitrate solution was prepared so that addition amount of chromium based on nickel was 7 atom %. The above nickel-cobalt porous sintered body was dipped in this aqueous chromium nitrate solution for 15 minutes. Then, this was taken out, followed by removing an excess solution and drying. Thereafter, this was heated at 470° C. in an air atmosphere to oxidize chromium and then was further heated to 700° C. in a hydrogen atmosphere to obtain a nickel-cobalt-chromium oxide ternary anode. Performance of a cell which had the anode obtained in this Example is shown by curve E in FIG. 2. The results were similar to those for the cell where the anode obtained in Example 1 was used.

後処理

  1. customby removing an excess solution
  2. customdrying
  3. temperaturewas further heated to 700° C. in a hydrogen atmosphere

出典と根拠

ORDレコード
ord-19e8ad1e2ca8460ca8396f93c67a819f
出典データセット
uspto-grants-1990_02
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US04902587

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート