ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Ethylene → Ethene propene 1-butene

HRID 1361571
印刷

反応式

HRID 1361571 の反応式
[CH2:1]=[CH:2][CH2:3][CH3:4].[CH2:5]([Al](CC(C)C)CC(C)C)[CH:6](C)C.C=CC.C=C.[Al]>[Cl-].[Cl-].FC(F)(F)C1C=C([Zr](C2C=CC=C(C(F)(F)F)C=2)(=C)(C2C(C)=CC(C(C)(C)C)=C2)C2C3CC4C(=CC=C(C(C)(C)C)C=4)C=3C=CC=2C(C)(C)C)C=CC=1.CO.C1(C)C=CC=CC=1.CCCCCC>[CH2:1]=[CH:2][CH3:3].[CH2:5]=[CH2:6].[CH2:1]=[CH:2][CH2:3][CH3:4]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

10

反応物 5

HCID 6325Ethylene2 回HCID 78441-ButeneHCID 8252PropyleneHCID 5359268AluminumHCID 16682931Triisobutylaluminum

生成物 1

HCID 168434Ethene propene 1-butene

試薬・触媒・溶媒 4

HCID 178477766
HCID 178477766、化合物
触媒
HCID 887Methanol溶媒
HCID 1140Toluene溶媒
HCID 8058Hexane溶媒

反応条件

温度
55 °C

実験手順

To a 2000 ml polymerization apparatus dried under reduced pressure and thoroughly purged with nitrogen, 817 ml of dry hexane, 50 g of 1-butene and triisobutylaluminum (1.0 mmol) were charged at normal temperature, then the temperature inside the polymerization apparatus was elevated to 55° C., and the polymerization apparatus was pressurized with propylene to 0.70 MPa and subsequently pressurized with ethylene to 0.75 MPa. Thereafter, a toluene solution in which 0.001 mmol of di(m-trifluoromethylphenyl)methylene(3-tert-butyl-5-methylcyclopentadienyl)(2,7-ditert-butyl-fluorenyl)zirconium dichloride synthesized by Synthesis Method 7 and methylaluminoxane (manufactured by Tosoh Finechem Corp.) in terms of 0.3 mmol of aluminum were contacted, was added to the polymerization vessel, and polymerization was conducted for 25 minutes while maintaining the internal temperature at 55° C. and the total pressure at 0.75 MPa by continuously supplying ethylene. The polymerization was stopped by adding 20 ml of methanol. After depressurizing, a polymer was precipitated out of the polymerization solution in 2 L of methanol, and was dried in a vacuum at 130° C. for 12 hours. The obtained polymer was 63.1 g and the polymerization activity was 151.4 kg/mmol-cat·hr. The polymer had a composition of 69.5 mol % of propylene content, 21.5 mol % of ethylene content and 9.0 mol % of 1-butene content, and had an intrinsic viscosity [η] of 2.42 dl/g.

後処理

  1. customTo a 2000 ml polymerization apparatus
  2. customdried under reduced pressure
  3. additionwere charged at normal temperature
  4. customwas elevated to 55° C.
  5. additionwas added to the polymerization vessel, and polymerization
  6. customa polymer was precipitated out of the polymerization solution in 2 L of methanol
  7. customwas dried in a vacuum at 130° C. for 12 hours

出典と根拠

ORDレコード
ord-1335f567a3664d6c9ca477c06b65dbf4
出典データセット
uspto-grants-2011_02
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US07879960B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート