ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Ethylene → Ethene propene 1-butene

HRID 1361576
印刷

反応式

HRID 1361576 の反応式
[CH2:1]=[CH:2][CH2:3][CH3:4].[CH2:5]([Al](CC(C)C)CC(C)C)[CH:6](C)C.C=CC.C=C.[Al]>[Cl-].[Cl-].C[Zr](C)(=[SiH2])(C1C2C(=C(C3C=CC=CC=3)C=CC=2)C=C1C)C1C2C(=C(C3C=CC=CC=3)C=CC=2)C=C1C.CO.C1(C)C=CC=CC=1.CCCCCC>[CH2:1]=[CH:2][CH3:3].[CH2:5]=[CH2:6].[CH2:1]=[CH:2][CH2:3][CH3:4]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

10

反応物 5

HCID 6325Ethylene2 回HCID 78441-ButeneHCID 8252PropyleneHCID 5359268AluminumHCID 16682931Triisobutylaluminum

生成物 1

HCID 168434Ethene propene 1-butene

試薬・触媒・溶媒 4

HCID 178421807
HCID 178421807、化合物
触媒
HCID 887Methanol溶媒
HCID 1140Toluene溶媒
HCID 8058Hexane溶媒

反応条件

温度
20 °C

実験手順

To a 4000 ml polymerization apparatus dried under reduced pressure and thoroughly purged with nitrogen, 1716 ml of dry hexane, 66.6 g of 1-butene, and triisobutylaluminum (1.0 mmol) were charged at normal temperature, then the temperature inside the polymerization apparatus was maintained at 20° C., and the polymerization apparatus was pressurized with propylene to 0.55 MPa and subsequently pressurized with ethylene to 0.80 MPa. Thereafter, a toluene solution in which 0.002 mmol of rac-dimethylsilylenebis(2-methyl-4-phenyl-indenyl)zirconium dichloride and methylaluminoxane (manufactured by Tosoh Finechem Corp.) in terms of 0.3 mmol of aluminum were contacted, was added to the polymerization vessel, and polymerization was conducted for 40 minutes while maintaining the internal temperature at 20° C. and the total pressure at 0.80 MPa by continuously supplying ethylene. The polymerization was stopped by adding 20 ml of methanol. After depressurizing, a polymer was precipitated out of the polymerization solution in 2 L of methanol, and was dried in a vacuum at 130° C. for 12 hours. The obtained polymer was 109.1 g and the polymerization activity was 163.7 kg/mmol-cat-hr. The polymer had a composition of 57.4 mol % of propylene content, 28.0 mol % of ethylene content and 14.6 mol % of 1-butene content, and had an intrinsic viscosity [η] of 2.98 dl/g.

後処理

  1. customTo a 4000 ml polymerization apparatus
  2. customdried under reduced pressure
  3. additionwere charged at normal temperature
  4. additionwas added to the polymerization vessel, and polymerization
  5. temperaturewhile maintaining the internal temperature at 20° C.
  6. customa polymer was precipitated out of the polymerization solution in 2 L of methanol
  7. customwas dried in a vacuum at 130° C. for 12 hours

出典と根拠

ORDレコード
ord-f7ed3a07b49e49c882bcc1031473cf84
出典データセット
uspto-grants-2011_02
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US07879960B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート