ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Toluene → Cyclododeca-1,3,5-triene

HRID 1413710
印刷

反応式

HRID 1413710 の反応式
[C:1]1([CH3:7])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1>[CH-]=O.[CH-]=O.[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[Co].[Co+2]>[CH:2]1[CH2:3][CH2:4][CH2:5][CH2:6][CH2:1][CH2:7][CH:3]=[CH:2][CH:1]=[CH:6][CH:5]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

3

反応物 1

HCID 1140Toluene

生成物 1

HCID 53421619Cyclododeca-1,3,5-triene

試薬・触媒・溶媒 1

HCID 25049Dicobalt Octacarbonyl (stabilized with 1-5% Hexane)触媒

反応条件

温度
170 °C

実験手順

The catalyst, 75 mg of tris-(dibenzyl sulfide)-tris-chloro-rhodium and 2.4 g of dicobalt octacarbonyl, and 500 g of toluene are introduced into a fine-steel autoclave. The autoclave is repeatedly purged with a 1:1 gas mixture of carbon monoxide and hydrogen with which a pressure of up to 100 bars is established. The autoclave is heated with stirring to 170° C. and the pressure is increased to 200 bars using the same gas mixture, the pressure subsequently being kept constant by the introduction of more CO/H2 when the pressure falls. After 1 hour, the temperature is reduced to 110° C. and a solution of 500 g of cyclododeca-1,5,9-triene in 1,000 g of toluene is pumped into the autoclave over a period of 3 hours. After another 90 minutes, the reaction mixture is cooled and the autoclave is vented and purged with nitrogen. The reaction solution is filtered. The solvent is distilled off at 1,600 Pa. The reaction product is distilled in a thin layer evaporator at 13 Pa and at a jacket temperature of around 220° C. The composition of the distillate is determined by gas chromatography (column: 1 m Carbowax 6000 on Teflon; heating rate: 15° C./min; 130° to 260° C.). The sample is diluted with tetrahydrofuran.

後処理

  1. customThe autoclave is repeatedly purged with a 1:1 gas mixture of carbon monoxide and hydrogen with which a pressure of up to 100 bars
  2. temperatureThe autoclave is heated
  3. temperaturethe pressure is increased to 200 bars
  4. customis reduced to 110° C.
  5. waita solution of 500 g of cyclododeca-1,5,9-triene in 1,000 g of toluene is pumped into the autoclave over a period of 3 hours
  6. waitAfter another 90 minutes
  7. temperaturethe reaction mixture is cooled
  8. custompurged with nitrogen
  9. filtrationThe reaction solution is filtered
  10. distillationThe solvent is distilled off at 1,600 Pa
  11. distillationThe reaction product is distilled in a thin layer evaporator at 13 Pa and at a jacket temperature of around 220° C
  12. temperatureThe composition of the distillate is determined by gas chromatography (column: 1 m Carbowax 6000 on Teflon; heating rate: 15° C./min; 130° to 260° C.)
  13. additionThe sample is diluted with tetrahydrofuran

出典と根拠

ORDレコード
ord-839b0d8a60e741da87df83dd496b595c
出典データセット
uspto-grants-1981_02
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US04251462

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート