ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

N,N-Dimethyl-1,3-propanediamine → styrene N-(3-dimethylaminopropyl)maleimide

HRID 1658154
印刷

反応式

HRID 1658154 の反応式
[CH:1]([C:9]1=[CH:10][C:11]([O:13][C:14]1=[O:15])=O)=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.C=CC1C=CC=CC=1.C1C(=O)OC(=O)C=1.[CH3:31][N:32]([CH3:37])[CH2:33][CH2:34][CH2:35][NH2:36]>CN(C)C=O>[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.[CH3:31][N:32]([CH3:37])[CH2:33][CH2:34][CH2:35][N:36]1[C:14](=[O:15])[CH:9]=[CH:10][C:11]1=[O:13]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

5

反応物 3

HCID 7993N,N-Dimethyl-1,3-propanediamineHCID 62707Lytron 810HCID 54215275Styrenemaleic anhydride

生成物 1

HCID 3080809styrene N-(3-dimethylaminopropyl)maleimide

試薬・触媒・溶媒 1

HCID 6228Dimethylformamide溶媒

反応条件

温度
110 °C

実験手順

A solution of 250 g of copoly(styrene-maleic anhydride (commercially available from the Monsanto Chemical Company under the tradename of Lytron 810) in 2500 ml of dry dimethylformamide is made by stirring in a 5-liter flask, containing a reflux condenser, thermometer, stirrer, and dropping funnel. The mixture is heated to 110°C and 230 g of N,N-dimethyl-1,3-propanediamine is added slowly at a rate to keep the mixture boiling slightly. Polymer precipitates as a gummy mass at first but goes back into solution after about half of the amine is added. The condenser is replaced by a distillation column and about 500 ml of material is removed by distillation with stirring. The residue is cooled, precipitated in water, collected by filtration and air-dried at room temperature for 2 days. The solid is dissolved in acetone, and again precipitated in water and air-dried. Yield = 260 g of off-white, friable solid.

後処理

  1. additioncontaining a reflux condenser
  2. customthermometer, stirrer, and dropping
  3. customPolymer precipitates as a gummy mass at first but
  4. additionis added
  5. distillationThe condenser is replaced by a distillation column and about 500 ml of material
  6. customis removed by distillation
  7. stirringwith stirring
  8. temperatureThe residue is cooled
  9. customprecipitated in water
  10. filtrationcollected by filtration
  11. customair-dried at room temperature for 2 days
  12. dissolutionThe solid is dissolved in acetone
  13. customagain precipitated in water
  14. customair-dried

出典と根拠

ORDレコード
ord-3272e17f5fcf442d80bddb8539f740db
出典データセット
uspto-grants-1976_06
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US03962527

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート