ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

4-Methylacetanilide → Benzenamine, 4-methyl-N-(4-methylphenyl)-

HRID 1739619
印刷

反応式

HRID 1739619 の反応式
[CH3:1][C:2]1[CH:11]=[CH:10][C:5]([NH:6][C:7](=O)[CH3:8])=[CH:4][CH:3]=1>[O-]S([O-])(=O)=O.[Cu+2]>[C:2]1([CH3:11])[CH:3]=[CH:4][C:7]([NH:6][C:5]2[CH:10]=[CH:11][C:2]([CH3:1])=[CH:3][CH:4]=2)=[CH:8][CH:1]=1
参加物実験手順後処理出典と根拠反応ノート

参加物

3

反応物 1

HCID 76844-Methylacetanilide

生成物 1

HCID 69293Benzenamine, 4-methyl-N-(4-methylphenyl)-

試薬・触媒・溶媒 1

HCID 24462Copper Sulfate触媒

実験手順

To a round bottom flask (3 L) equipped with a condenser a Dean-Stark trap, a mechanical stirrer, and an argon-outlet with a thermometer, was added 4'-methylacetanilide (448 g, 3.0 mol), 4-iodotoluene (746 g, 3.4 mol, from Aldrich), potassium carbonate (830 g, 6.0 mol), copper sulfate (20 g), and toluene (50 mL). The reaction mixture was heated at 210° C. for 24 hours in an oil bath. The resulting solution was decanted to a round bottom flask (5 L) and the remaining solid was washed with hot ethanol (3×500). To the combined mixtures were added potassium hydroxide (340 g) and water (400 mL) and then refluxed for 24 h. To resulting solution was added concentrated HCI (400 mL) dropwise followed by toluene (1,000 mL). The mixture was refluxed for 10 min. The hot organic layer (top) was separated, washed with a hot water (500 mL×2), and concentrated under reduced pressure. The resulting solid was recrystallized from the mixture of toluene (100 mL) and hexanes (700 mL). The obtained wet crystals were ground with a mortar and pestle, filtered, washed with hexanes (100 mL), and dried in air for 24 hours to give brown crystals (360 g, 6 mol). The filtrate was concentrated under reduced pressure and recrystallized from the mixture of toluene (20 mL) and hexanes (150 mL) to give a brown solid (120 g, second crop). The combined solid was distilled at 165 oC. and 1 Torr to give a white solid (445 g) while the forerun first portion (15 g, distilled at 65-80°C. and 1 Torr) was discarded. The white solid was recrystallized from hexanes (500 mL) to give a white solid (422 g, 71% yield). Melting point: 80-82° C. (lit. 79°oo C. TCl catalog) 1H-NMR (CDCl3): 7.04 (d, 4H), 6.93 (d, 4H), 5.45 (s, br, 1H), 2.33 (s, 6H) ppm. Note that when iodotoluenes from Oakwood Product Inc., or Charkit Chemical Inc., were used, the above reaction was very slow. Three portions of CuSO4 (50 g) was added every 10 hours and the reaction was completed in 40 hours (over 95% conversion of 4'-methylacetanilide). During work-up after hydrolysis, suction filtraton was required to remove copper residues.

後処理

  1. customthe above reaction
  2. customDuring work-up after hydrolysis, suction filtraton
  3. customto remove copper residues

出典と根拠

ORDレコード
ord-d6b67d58175d43848e3cb4e43c7ab6cf
出典データセット
uspto-grants-1999_10
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US05968674

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート