ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Dimethyl Sulfoxide → 4-Pentenoic acid

HRID 1760498
印刷

反応式

HRID 1760498 の反応式
[CH3:1][NH:2][S:3]([C:6]([F:18])([F:17])[C:7]([F:16])([F:15])[C:8]([F:14])([F:13])[C:9]([F:12])([F:11])[F:10])(=[O:5])=[O:4].CS(C)=O.[OH-:23].[K+].Br[CH2:26][CH2:27][CH2:28][CH2:29][CH2:30][CH2:31][CH2:32][CH2:33][CH2:34][CH:35]=[CH2:36]>O>[CH2:26]=[CH:27][CH2:28][CH2:29][C:30]([OH:4])=[O:23].[CH2:26]([N:2]([CH3:1])[S:3]([C:6]([F:17])([F:18])[C:7]([F:15])([F:16])[C:8]([F:13])([F:14])[C:9]([F:10])([F:12])[F:11])(=[O:5])=[O:4])[CH2:27][CH2:28][CH2:29][CH2:30][CH2:31][CH2:32][CH2:33][CH2:34][CH:35]=[CH2:36]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

7

反応物 4

HCID 679Dimethyl SulfoxideHCID 14797Potassium Hydroxide2 回HCID 1099681,1,2,2,3,3,4,4,4-nonafluoro-N-methylbutane-1-sulfonamideHCID 28414811-Bromo-1-undecene

生成物 2

HCID 611384-Pentenoic acidHCID 22596927n-(10-Undecenyl)-n-methylperfluorobutanesulfonamide

試薬・触媒・溶媒 1

HCID 962Water溶媒

反応条件

温度
80 °C

実験手順

A 500 mL three-necked round-bottom flask equipped with magnetic stirring, oil bath heat, and connection to a nitrogen bubbler was charged with 17.2 g of N-methylperfluorobutanesulfonamide (C4F9SO2NHCH3) and 250 mL dimethyl sulfoxide. Stirring was begun, and the solid dissolved within a few minutes. A solution of 4.0 g of potassium hydroxide in 5 mL of water was added via pipette, and stirring was continued for another 30 min while the oil bath was heated to 80° C. By the end of this period most of the potassium hydroxide had dissolved. 11-Bromo-1-undecene, obtained from Aldrich Chemical Co. (95 percent purity, 12.3 g) was then added to the flask via pipette, and the reaction mixture was left to stir for 19 hr at 80° C. The oil bath was then removed to allow the mixture to cool, and the flask contents were poured into a separatory funnel. The mixture separated into two liquid phases, and the lower layer was drawn off. The upper phase was diluted with an equal volume of water, causing separation of a small amount of lower phase. This was also drawn off and combined with the first batch. The combined crude product (18.0 g) was dissolved in 150 ml dichloromethane and washed successively with 100 ml portions of water, 10 weight percent aqueous potassium hydroxide solution, water, and brine. The dichloromethane solution was dried over anhydrous magnesium sulfate and filtered, then solvent was removed on a rotary evaporator at water aspirator pressure. This left 17.9 g light straw-colored liquid product. Bulb-to-bulb vacuum distillation of 17.3 g crude product at 160-180° C. and 0.3 torr (4 Pa) gave 16.2 g of N-(10-undecenyl)-N-methylperfluorobutanesulfonamide as a clear, colorless liquid distillate.

後処理

  1. customA 500 mL three-necked round-bottom flask equipped with magnetic stirring, oil bath
  2. temperatureheat
  3. dissolutionthe solid dissolved within a few minutes
  4. stirringstirring
  5. addition(95 percent purity, 12.3 g) was then added to the flask via pipette
  6. waitthe reaction mixture was left
  7. stirringto stir for 19 hr at 80° C
  8. customThe oil bath was then removed
  9. temperatureto cool
  10. additionthe flask contents were poured into a separatory funnel
  11. customThe mixture separated into two liquid phases
  12. additionThe upper phase was diluted with an equal volume of water
  13. customseparation of a small amount of lower phase
  14. dissolutionwas dissolved in 150 ml dichloromethane
  15. washwashed successively with 100 ml portions of water, 10 weight percent aqueous potassium hydroxide solution, water, and brine
  16. dry with materialThe dichloromethane solution was dried over anhydrous magnesium sulfate
  17. filtrationfiltered
  18. customsolvent was removed on a rotary evaporator at water aspirator pressure
  19. distillationvacuum distillation of 17.3 g crude product at 160-180° C.

出典と根拠

ORDレコード
ord-34eb4d233a7c47669c058b1a5b3fb503
出典データセット
uspto-grants-2005_01
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06841079B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート