関与物質
| 役割 | 名称 | HCID | 仕込み量 |
|---|
| 反応物 | N,N,N-trimethylglycinium | HCID 248 | — |
| 反応物 | Citric Acid | HCID 311 | — |
| 反応物 | Propylene Glycol | HCID 1030 | — |
| 反応物 | Ethylenediaminetetraacetic Acid | HCID 6049 | — |
| 反応物 | Diethylene Glycol Monoethyl Ether | HCID 8146 | — |
| 反応物 | Ammonium Hydroxide | HCID 14923 | — |
| 反応物 | Sodium Sulfite | HCID 24437 | — |
| 反応物 | Acrylate | HCID 25188 | — |
| 反応物 | Oleic Acid | HCID 445639 | — |
| 反応物 | 2-((Z)-Octadec-9-enoxy)ethanol | HCID 13387455 | — |
| 反応物 | L-Ascorbic Acid | HCID 54670067 | — |
| 溶媒 | Water | HCID 962 | — |
| 生成物 | 2-Amino-5-(hydroxymethyl)phenol | HCID 14520115 | — |
反応手順
To prepare pre-mix: Add to a suitable vessel in the following order, citric acid, ethoxy diglycol, oleic acid, propylene glycol, and cocaamidopropyl betaine, then agitate until fully dispersed, then add Oleth-10, Oleth-2 and acrylate co-polymers, continue the agitation for 10 minutes and transfer to main vessel. To the main vessel then add water (heated to 50° C.), oleic acid, water, sodium sulphite, and EDTA. Next weigh out and add the ascorbic acid, then stir well until dissolved. Separately weigh dyes into a clean beaker and transfer also to the main vessel. Add the dyes and stir until dissolved (heat to 40° C. as necessary). Cool to room temperature with stirring, add the ammonium hydroxide and water with stirring, add citric acid to pH 10, and transfer to the storage container.
情報源と証拠
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| 特許番号 | US07226487B2 |
|---|
| 出典データセット | uspto-grants-2007_06 |
|---|
| ORD ID | ord-ec86bb39d47742e1b10cea3944d69566 |
|---|
| 出典メモ | uspto-grants-2007_06 |
|---|
