戻る
化工社化工社 化学情報印刷レポート · 研究参考用
HRID 20613作成日:2026年10月23日

Methyl 9-decenoate → Methyl 11-hydroxyundecanoate

https://huagongshe.com/ja/reaction/20613

反応式

関与物質

役割名称HCID仕込み量
反応物Methyl 9-decenoateHCID 1778877—
反応物(R,R)-2,7-DI-Tert-butyl-9,9-dimethyl-4,5-bis(methylphenylphosphino)xantheneHCID 11534901—
生成物Methyl 11-hydroxyundecanoateHCID 525065—

反応条件

温度85 °C

反応手順

A hydroformylation reaction was carried out in a Parr reactor (300 mL capacity) equipped with a mechanical stirrer, gas inlet tube, heating jacket, pressure transducer and thermocouple. The reactor was charged with methyl-9-decenoate (100 g, 0.54 mol), acetylacetonate(dicarbonyl)-rhodium (II) [Rh(CO)2 acac] (32 mg, 0.12 mmol), and 2,7-di-tert-butyl-9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene (342 mg, 0.49 mmol) under nitrogen, and then the reactor was sealed. The reactor was connected to a feed line for delivering synthesis gas (CO/H2, 1:1). The system was flushed with synthesis gas twice and then pressurized to 450 psi (3,103 kPa). The reactor was heated to 85° C. for 16 h while maintaining 450 psi (3,103 kPa) of syn gas pressure. After 16 h, the temperature was raised to 100° C. and heated for an additional 4 h. The reactor was cooled to ambient temperature and the unreacted gas was vented. After flushing the reactor with nitrogen to remove the last traces of syn gas, dioxane (50 ml) and 1 g of 5% Pt/SiO2 were introduced to the reactor. The system was flushed with hydrogen twice and pressurized to 500 psi (3,448 kPa) with hydrogen. The mixture was then heated to 150° C. for 20 h maintaining 500 psi (3,448 kPa) of hydrogen pressure. After cooling, the contents were filtered to remove the solid catalyst, and the solvent was removed by rotary evaporation. The resulting liquid was subjected to distillation under reduced pressure. The fraction boiling at 140-150° C. (1.5 mm pressure) was collected and dissolved in 1200 mL of hexanes. The solution was then allowed to crystallize in a freezer for 18 h. White crystals were collected by cold filtration and washed once with cold hexanes. Drying under reduced pressure yielded methyl 11-hydroxyundecanoate as white solid (77 g; 65% overall yield). Conversion of methyl 11-hydroxyundecanoate via transesterification with a polyol, such as glycerol, to the corresponding polyester polyol, such as the triglyceride of 11-hydroxyundecanoic acid, can be effected by transesterification methods known in the art.

情報源と証拠

DOI10.6084/m9.figshare.5104873.v1
特許番号US07745652B2
出典データセットuspto-grants-2010_06
ORD IDord-ebffc9de3b4747108093ba3579fac7f5
出典メモuspto-grants-2010_06