7,7-Dimethoxyheptanal → HCID 68902939、化合物

To a reactor containing dichloromethane (4 L) was added 4-isopropylamino-1-(4-methoxypyrid-3-ylmethyl)piperidine monobenzoic acid salt (1.5 kg, 3.89 mol) while maintaining the temperature of the mixture at −5° C. to 5° C. The container used to add the salt was rinsed with dichloromethane (1.5 L) and the rinse was added to the reaction mixture. The temperature of the reaction mixture was then adjusted to 0° C. to 5° C. and 7,7-dimethoxyheptanal (790 g, 4.25 mol, 93.8% purity by GC) was added while maintaining the temperature of the reaction mixture between 0° C. to 5° C. The container used to add the 7,7-dimethoxyheptanal was rinsed with dichloromethane (0.8 L) and the rinse was added to the reactor. The resulting reaction mixture was then stirred at 0° C. to 5° C. for 1 hour. Sodium triacetoxyborohydride (1.07 kg, 5.05 mol) was then added in 7 equal portions over a period of 1 hour while maintaining the temperature of the reaction mixture between −5° C. to 5° C. The container used to add the sodium triacetoxyborohydride was rinsed with dichloromethane (0.8 L) and the rinse was added to the reaction mixture. The reaction mixture was then stirred at 0° C. to 5° C. for 21 hours. An aqueous solution of potassium carbonate (500 g) in deionized water (8.6 L) was then added to the reaction mixture while maintaining the temperature of the mixture between to 0° C. to 25° C. The resulting mixture was stirred for 2 hours at a temperature between 15° C. to 25° C. The layers were then allowed to separate over a period of 30 minutes and the organic layer was collected. The washing procedure with aqueous potassium carbonate solution was repeated 2 times. To the organic layer was then added an aqueous solution of sodium chloride (5.7 kg) in deionized water (15 L) while maintaining the temperature between to 15° C. to 25° C. The resulting mixture was stirred for 30 minutes at a temperature between 15° C. to 25° C. and then the layers were allowed to separate over a period of 30 minutes. The organic layer was collected and to this layer was added dichloromethane (1.5 L). The resulting solution containing the title compound was stored under a nitrogen atmosphere, protected from light, at 0° C. to 5° C. until used in the subsequent reaction.