ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Acetic Anhydride → Butanoic acid, 2-(ethoxymethylene)-4,4-difluoro-3-oxo-, ethyl ester

HRID 222776
印刷

反応式

HRID 222776 の反応式
[C:1]([O:4][C:5](=O)C)(=O)[CH3:2].[F:8][CH:9]([F:18])[C:10](=[O:17])[CH2:11][C:12]([O:14][CH2:15][CH3:16])=[O:13].C(OCC)(OCC)OCC.FC(F)C(OCC)=O>C(O)C.C(OCC)(=O)C>[CH2:1]([O:4][CH:5]=[C:11]([C:10](=[O:17])[CH:9]([F:18])[F:8])[C:12]([O:14][CH2:15][CH3:16])=[O:13])[CH3:2]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

6

反応物 4

HCID 7918Acetic AnhydrideHCID 9961Ethyl difluoroacetateHCID 31214Ethyl orthoformateHCID 67697Butanoic acid, 4,4-difluoro-3-oxo-, ethyl ester

生成物 1

HCID 53395411Butanoic acid, 2-(ethoxymethylene)-4,4-difluoro-3-oxo-, ethyl ester

試薬・触媒・溶媒 1

HCID 21584252
Ethanol ethylacetate
溶媒

反応条件

温度
110 °C

実験手順

427.8 g of acetic anhydride (4.15 mol) were initially charged in a stirred vessel and heated to 110° C. Within 2 hours, 438 g of crude ethyl 4,4-difluoroacetoacetate from synthesis example 2 (20.9% solution in ethanol/ethyl acetate) and 145.3 g (0.96 mol) of triethyl orthoformate were metered in in parallel. After about half had been fed in, reflux set in at 106° C. At the end of the metered addition, the internal temperature was 94° C. The mixture was stirred at reflux temperature for a further 6 hours and then cooled to 25° C. At a pressure of 150 mbar, the low boilers (ethyl acetate, acetic acid, acetic anhydride, triethyl orthoformate) were distilled off at internal temperature 40-90° C. To complete the removal, the pressure was lowered to 10 mbar at 90° C., and the distillation bottoms were subsequently stirred at 95° C./10 mbar for 1 hour. The distillation residue (125.7 g) comprised 89.7% by weight of the desired ethyl 2-ethoxymethylene-4,4-difluro-3-oxobutyrate. This corresponds to an overall yield over the two synthesis stages of 84.6% based on the ethyl difluoroacetate used in working example 2.

後処理

  1. temperaturereflux
  2. customset in at 106° C
  3. additionAt the end of the metered addition
  4. customwas 94° C
  5. temperatureat reflux temperature for a further 6 hours
  6. temperaturecooled to 25° C
  7. distillationAt a pressure of 150 mbar, the low boilers (ethyl acetate, acetic acid, acetic anhydride, triethyl orthoformate) were distilled off at internal temperature 40-90° C
  8. customthe removal
  9. customwas lowered to 10 mbar at 90° C.
  10. distillationthe distillation
  11. stirringbottoms were subsequently stirred at 95° C./10 mbar for 1 hour
  12. customThis corresponds to an overall yield over the two synthesis stages of 84.6%

出典と根拠

ORDレコード
ord-77058c5613684b8bb9cad3ea45d40583
出典データセット
uspto-grants-2012_06
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08207354B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート