戻る
化工社化工社 化学情報印刷レポート · 研究参考用
HRID 2535作成日:2026年10月24日

Epichlorohydrin → Btg H2O

https://huagongshe.com/ja/reaction/2535

反応式

関与物質

役割名称HCID仕込み量
反応物EpichlorohydrinHCID 7835—
反応物1-ChlorooctaneHCID 8142—
反応物Triethylene glycol monobutyl etherHCID 8923—
反応物Crystal VioletHCID 11057—
触媒Tetraethylammonium BromideHCID 6285—
溶媒Acetic AcidHCID 176—
溶媒WaterHCID 962—
溶媒TolueneHCID 1140—
生成物Btg H2OHCID 88213291—

反応条件

温度55 °C

反応手順

To a first 250 ml round bottom flask equipped with a stirrer, nitrogen inlet tube, and a distillation head were added 1 part of NP-(EO)150 -OH (surfactant) and 2 parts of toluene. To a second 250 ml round bottom flask equipped with a stirrer, nitrogen inlet tube, and a distillation head were added 1 part of NP-(EO)50 -OH (surfactant) and 2 parts of toluene. Both flasks were heated to azeotropically distill off the water with stirring +N2 sparge. After the water concentration in each flask was less than 50 ppm the mixture was cooled to 55° C. Sodium methoxide was added to each flask in an amount that OH:NaOMe=1:1 based on the calculated hydroxyl value of surfactant. Heat was applied to distill off formed methanol by distilling off half of the initial weight of toluene from the flask. In the first flask, the reaction mixture was then refluxed for 1 hour. The flask was cooled to 60° C. afterwhich 1.1 moles of epichlorohydrin were added per mole sodium alkoxide. The reaction mixture was then maintained at 70° C. for about 2 hours. When alkalinity by titration approached zero, the excess epichlorohydrin was vacuum stripped. A 4.0 gram aliquot of the reaction mixture +4 grams of tetraethylammonium bromide were dissolved in 50 ml of glacial acetic acid and the resulting solution titrated with a 0.1036 N HClO4 in glacial acetic acid solution to a methyl violet end point for the amount of epoxide (epoxy titration). The difference in the total alkalinity minus the HClO4 titration equals the amount of epoxide. The contents of the first and second flasks were mixed in a third flask such that the epoxy/alkoxide molar ratio was equal to 1:1 and the contents heated to 75°-85° C. for 2 hours. When the epoxy titration value equaled zero, 1-chlorooctane was added such that the mole ratio of Cl:ONa was 1:1. The reaction mixture was then refluxed until the alkalinity titration value was zero. Butoxytriglycol (BTG) and water were added to give a clear yellow BTG/H2O/product ratio of 1:2:2 by weight.

情報源と証拠

DOI10.6084/m9.figshare.5104873.v1
特許番号US05728895
出典データセットuspto-grants-1998_03
ORD IDord-306a34f7cedd44f8814563b5b59e069e
出典メモuspto-grants-1998_03