ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Hydrochloric Acid → 2,5-Dichloro-4'-phenoxybenzophenone

HRID 264587
印刷

反応式

HRID 264587 の反応式
Cl.[Cl:2][C:3]1[CH:11]=[CH:10][C:9]([Cl:12])=[CH:8][C:4]=1[C:5](Cl)=[O:6].[C:13]1([O:19][C:20]2[CH:25]=[CH:24][CH:23]=[CH:22][CH:21]=2)[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=1.[Cl-].[Al+3].[Cl-].[Cl-]>C(Cl)Cl>[Cl:2][C:3]1[CH:11]=[CH:10][C:9]([Cl:12])=[CH:8][C:4]=1[C:5]([C:23]1[CH:24]=[CH:25][C:20]([O:19][C:13]2[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=2)=[CH:21][CH:22]=1)=[O:6]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

6

反応物 4

HCID 313Hydrochloric AcidHCID 7583Diphenyl EtherHCID 179452,5-Dichlorobenzoyl chlorideHCID 6451240Aluminum(III) Chloride2 回

生成物 1

HCID 120810592,5-Dichloro-4'-phenoxybenzophenone収率 73%

試薬・触媒・溶媒 1

HCID 6344
Dichloromethane
溶媒

反応条件

温度
5 °C

実験手順

To a 22 L open-mouth round bottom flask fitted with a three-necked flange head, a mechanical stirrer, a nitrogen inlet and an outlet connected to a HCl scrubbing tower was added 2,5-dichlorobenzoic chloride (4500 g, 21.5 mol) and phenyl ether (5489 g, 32.3 mol). The solution was cooled in ice to 5° C. under stirring and aluminum chloride (3700 g, 7.8 mol) was added slowly. After about 300 g aluminum chloride was added, the solution started to foam violently. The rest was added carefully over about 10 min. On several occasions, the stirring had to be stopped to control the foaming. The temperature of the reaction mixture was about 35° C. after the addition. The mixture was then stirred for about 30 min. and poured into about 20 gallon of ice water. The large reddish mass was dissolved by adding about 12 L of methylene chloride and stirring. The organic layer was separated and the aqueous layer was extracted with some methylene chloride. After methylene chloride was removed from the combined organic layer by distillation, the residue was recrystallized twice from cyclohexane (2×10 L), washed with cooled hexane, air dried and then vacuum dried to afford 5387 g monomer (73%). The mother liquor was kept for later recovery of remaining product.

後処理

  1. customTo a 22 L open-mouth round bottom flask fitted with a three-necked flange head, a mechanical stirrer, a nitrogen inlet and an outlet
  2. additionThe rest was added carefully over about 10 min
  3. customwas about 35° C.
  4. additionafter the addition
  5. stirringThe mixture was then stirred for about 30 min.
  6. dissolutionThe large reddish mass was dissolved
  7. stirringstirring
  8. customThe organic layer was separated
  9. extractionthe aqueous layer was extracted with some methylene chloride
  10. customAfter methylene chloride was removed from the combined organic layer by distillation
  11. customthe residue was recrystallized twice from cyclohexane (2×10 L)
  12. washwashed with cooled hexane, air
  13. customdried
  14. customvacuum dried

出典と根拠

ORDレコード
ord-5393d1e608b64fb4b2445662b3fe1fbc
出典データセット
uspto-grants-1997_07
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US05646232

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート