化工社化工社 化学情報印刷レポート · 研究参考用
HRID 276210作成日:2026年10月27日
Chlorotrimethylsilane → (E)-3-cyclohexyl-2-(4-(methanesulfonyl)-3-nitro-phenyl)-acrylic acid methyl ester
https://huagongshe.com/reaction/276210
関与物質
| 役割 | 名称 | HCID | 仕込み量 |
|---|
| 反応物 | Chlorotrimethylsilane | HCID 6397 | — |
| 反応物 | 1,2-Dibromoethane | HCID 7839 | — |
| 反応物 | Triphenylphosphine | HCID 11776 | — |
| 反応物 | Ammonium Chloride | HCID 25517 | — |
| 反応物 | 4-Bromo-1-methanesulfonyl-2-nitro-benzene | HCID 18434359 | — |
| 反応物 | (E)-3-cyclohexyl-2-iodo-acrylic acid methyl ester | HCID 86583971 | — |
| 触媒 | Zinc | HCID 23994 | — |
| 触媒 | (1E,4E)-1,5-diphenylpenta-1,4-dien-3-one; palladium | HCID 6505921 | — |
| 溶媒 | Tetrahydrofuran | HCID 8028 | — |
| 生成物 | (E)-3-cyclohexyl-2-(4-(methanesulfonyl)-3-nitro-phenyl)-acrylic acid methyl ester | HCID 67483042 | 82% |
反応手順
A mixture of zinc dust (650 mg, 10 mmol, Aldrich, −325 mesh) and dry tetrahydrofuran (1 mL) under argon was treated with 1,2-dibromoethane (187 mg, 1.5 mmol). The zinc suspension was then heated with a heat gun to ebullition, allowed to cool, and heated again. This process was repeated three times to make sure the zinc dust was activated. The activated zinc dust suspension was then treated with trimethylsilyl chloride (110 mg, 1 mmol), and the suspension was stirred for 15 min at 25° C. The reaction mixture was then treated dropwise with a solution of (E)-3-cyclohexyl-2-iodo-acrylic acid methyl ester (prepared in Example 4, 1.2 g, 4.2 mmol) in dry tetrahydrofuran (2 mL) over 5 min. The reaction mixture was then stirred at 40-45° C. For 1 h and then stirred overnight at 25° C. The reaction mixture was then diluted with dry tetrahydrofuran (4 mL), and the stirring was stopped to allow the excess zinc dust to settle down (˜2 h). In a separate reaction flask, bis(dibenzylideneacetone)palladium(0) (54 mg, 0.1 mmol) and triphenylphosphine (104 mg, 0.4 mmol) in dry tetrahydrofuran (4 mL) was stirred at 25° C. under argon for 10 min and then treated with 4-bromo-2-nitrophenyl methyl sulfone (0.94 g, 3.35 mmol) and the freshly prepared zinc compound in tetrahydrofuran. The resulting brick red solution was heated at 50° C. For 15 h. The reaction mixture was then cooled to 25° C. and then poured into a saturated aqueous ammonium chloride solution (70 mL), and the organic compound was extracted into ethyl acetate (3×50 mL). The combined organic extracts were washed with a saturated aqueous sodium chloride solution (1×100 mL), dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. Biotage chromatography (FLASH 40M, Silica, 9/1 to 3/1 hexanes/ethyl acetate) afforded (E)-3-cyclohexyl-2-(4-(methanesulfonyl)-3-nitro-phenyl)-acrylic acid methyl ester (1 g, 82%) as an amorphous white solid: EI-HRMS m/e calcd for C17H21NO6S (M+) 367.1090, found 367.1091.
情報源と証拠
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| 特許番号 | US06353111B1 |
|---|
| 出典データセット | uspto-grants-2002_03 |
|---|
| ORD ID | ord-16fc913589754204a7c52481e4ff5b6c |
|---|
| 出典メモ | uspto-grants-2002_03 |
|---|