[NH2:1][C:2]1[CH:7]=[CH:6][C:5]([CH3:8])=[CH:4][CH:3]=1.[Cl-].[Ca+2].[Cl-].[Cl-].[Al+3].[Cl-].[Cl-].[C:16]1([CH3:22])[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=1>C1C2C(=CC=CC=2)CCC1>[CH3:8][C:5]1[CH:6]=[CH:7][C:2]([NH:1][C:19]2[CH:20]=[CH:21][C:16]([CH3:22])=[CH:17][CH:18]=2)=[CH:3][CH:4]=1In a 500-ml four-necked flask were charged 56 ml of 1,2,3,4-tetrahydronaphthalene (boiling point: 207° C.) as a solvent and 91.1 g (0.83 mol) of p-toluidine, followed by the addition of 25.6 g (0.23 mol) of anhydrous calcium chloride and 30.8 g (0.23 mol) of anhydrous aluminum chloride under stirring. The resulting mixture was reacted at 210 to 220° C. for 3 hours under a nitrogen atmosphere. After cooling, the reaction mixture was added with 126 ml of toluene, followed by charging in 160 g of ice water. The resulting mixture was stirred and allowed to stand, and then the resulting water layer was separate out. The organic layer was washed successively with 150 ml of a 5% aqueous solution of hydrochloric acid, 100 ml of a 5% aqueous solution of sodium bicarbonate and 100 ml of water. After removal of the organic solvent by distillation under reduced pressure, 80 ml of methanol was added to the residue and the mixture was crystallized overnight at −3 to −8° C. The resulting crystals were collected by filtration, washed with 30 ml of methanol and then dried, whereby 57.1 g (yield: 69.8%) of the title compound was obtained as white crystals. As a result of HPLC. analysis (column: YMC-A-312, detection UV: 280 nm, flow rate: 1.0 ml/min, eluent: acetonitrile/water=8/2), the compound was found to have a purity of 99.8%.