ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Ammonia → 2-(3,5-Dimethyl-phenoxy)-1-methyl-ethylamine

HRID 37637
印刷

反応式

HRID 37637 の反応式
[CH3:1][CH:2](O)[CH2:3][O:4][C:5]1[CH:10]=[C:9]([CH3:11])[CH:8]=[C:7]([CH3:12])[CH:6]=1.[NH3:14].[H][H]>[Cr].[Cu]>[CH3:12][C:7]1[CH:6]=[C:5]([CH:10]=[C:9]([CH3:11])[CH:8]=1)[O:4][CH2:3][CH:2]([NH2:14])[CH3:1]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

5

反応物 3

HCID 222Ammonia2 回HCID 110739942-Propanol, 1-(3,5-dimethylphenoxy)-HCID 178418361HCID 178418361、化合物2 回

生成物 1

HCID 53052572-(3,5-Dimethyl-phenoxy)-1-methyl-ethylamine収率 51%

試薬・触媒・溶媒 1

HCID 9833946Chromium, compd. with copper (1:1)触媒

反応条件

温度
240 °C

実験手順

A 150 cc autoclave was charged with 30.0 g (166 mmol) of 1-methyl-2-(3,5-dimethylphenoxy)ethanol, 3.0 g of a copper-chromium catalyst (N203SD, supplied by Nikki Chemical Co., Ltd.: CuO 44%, Cr2O3 44%, MnO2 5G %) and 30.0 g of a solvent (toluene). Further, 9.6 g (564 mmol) of ammonia was added, a hydrogen pressure of 40 kg/cm2G was applied, and then the temperature of the mixture was increased up to 240° C. The mixture was stirred at a reaction pressure of 104 to 97 kg/cm2G for 7 hours. The reaction mixture was allowed to cool, and the pressure of an excess of ammonia and hydrogen was released. Then, the catalyst was removed by filtration. The resultant filtrate was extracted with 100 ml of a 20% hydrochloric acid aqueous solution. The extracted aqueous layer was neutralized with a 20% sodium hydroxide aqueous solution, and 200 ml of ethyl ether was added to the aqueous layer for extraction. The organic layer was dried over anhydrous sodium sulfate, and then the solvent was distilled off under reduced pressure to give 15.2 g of the intended compound, 1-(3,5-dimethylphenoxy)-2-aminopropane (yield 51%). The selectivity to the intended compound, calculated on the basis of the total amount of the starting compound, was 81%.

後処理

  1. temperatureto cool
  2. customThen, the catalyst was removed by filtration
  3. extractionThe resultant filtrate was extracted with 100 ml of a 20% hydrochloric acid aqueous solution
  4. additionwas added to the aqueous layer for extraction
  5. dry with materialThe organic layer was dried over anhydrous sodium sulfate
  6. distillationthe solvent was distilled off under reduced pressure

出典と根拠

ORDレコード
ord-00dbaf2f0b70441f9aa0937af3cc2b6d
出典データセット
uspto-grants-1995_05
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US05420352

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート