Methyl iodide → Simvastatin phenylboronate

関与物質

反応条件

反応手順

A 2L 3-necked flask was charged with pyrrolidine (56 mL, 0.67 mol) and dry THF (453 g) under a nitrogen atmosphere. n-Butyllithium (419 mL, 1.6 M hexane solution, 0.67 mol) was added dropwise at a temperature between −20 and −25° C. over a period of 1 hour. The solution was maintained at this temperature for 30 minutes and then cooled to −55 to −60° C. A solution of lovastatin phenylboronate (101.7 g, 0.20 mol) in 274.7 g of THF was cooled to a temperature of −50° C. and then added to the cold lithium pyrrolidide solution at a rate such that the internal temperature was between −50 and −55° C. during the addition. The reaction was held at this temperature for 4 hours and then methyl iodide (116.4 g, 0.82 mol) was added at a temperature below −55°C. The reaction was stirred for 13 hours at −15 to −20° C. and then quenched with 500 mL of 2M HCl at a temperature below 0° C. After warming to 20° C., the layers were separated and the aqueuous layer was extracted with ethyl acetate. The combined organic layers were washed with 5% NaHSO3 solution and deionized water. The solution was filtered through a Celite pad and concentrated to yield 102.8 g (98.4%) of crude simvastatin phenylboronate at >95% purity by HPLC. A portion of the above material (50.0 g) was charged into a nitrogen purged flask with acetonitrile (100 mL). The suspension was heated at 110° C. for 3 hours and then cooled to −5 to −10° C. for 1 hour. The product was filtered and washed with 25 mL of −5° C. acetonitrile and dried under vacuum to provide 43.7 g of simvastatin phenylboronate at >99% purity by HPLC.

情報源と証拠