ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

t-Butylacrylamide → t-butylacrylamide 4-styrenesulfonic Acid Sodium Salt

HRID 411790
印刷

反応式

HRID 411790 の反応式
O.[Na+:2].[CH2:3]=[CH:4][C:5]1[CH:10]=[CH:9][C:8]([S:11]([O-:14])(=[O:13])=[O:12])=[CH:7][CH:6]=1.[C:15]([C:19](=[CH2:23])[C:20]([NH2:22])=[O:21])([CH3:18])([CH3:17])[CH3:16]>O>[C:15]([C:19](=[CH2:23])[C:20]([NH2:22])=[O:21])([CH3:18])([CH3:17])[CH3:16].[Na+:2].[CH2:3]=[CH:4][C:5]1[CH:6]=[CH:7][C:8]([S:11]([O-:14])(=[O:13])=[O:12])=[CH:9][CH:10]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

4

反応物 2

HCID 18539458t-ButylacrylamideHCID 23681144Sodium 4-ethenylbenzene-1-sulfonate--water (1/1/1)

生成物 1

HCID 131723881t-butylacrylamide 4-styrenesulfonic Acid Sodium Salt

試薬・触媒・溶媒 1

HCID 962Water溶媒

反応条件

温度
75 °C

実験手順

In a 250 mL Morton flask (fitted with mechanical stirrer, thermometer, and oil bath heating) under argon atmosphere were combined 4-styrenesulfonic acid sodium salt hydrate (0.10 g), t-butylacrylamide (Aldrich, 9.9 g), α-olefin sulfonate surfactant (Rhodia, Rhodacal A-246/L, 12.5 g of a ca. 40% aqueous solution), and water (175 g). The mixture was stirred and heated in a 90° C. oil bath until an internal temperature of ca. 75° C. was obtained, and then solid initiator (K2S2O8, Aldrich, 0.20 g) was added all at once. The appearance of the aqueous monomer slurry changed quickly over a period of 1-4 minutes, with the solid dissolving to form a nearly transparent, bluish scattering emulsion. The mixture was stirred and heated in a 100° C. oil bath for an additional 2 h (internal temperature of 93° C.) to decompose the excess initiator. The mixture was cooled with stirring, and filtered to remove any suspended solid. Yield 196.2 g of emulsion, pH ca. 3 to pH paper, 8.07% solids, particle size=9.3 nm Rh, by DLS, (2nd cumulant analysis PDI=0.10).

後処理

  1. customIn a 250 mL Morton flask (fitted with mechanical stirrer
  2. temperaturethermometer, and oil bath heating) under argon atmosphere
  3. customwas obtained
  4. additionsolid initiator (K2S2O8, Aldrich, 0.20 g) was added all at once
  5. dissolutiondissolving
  6. customto form a nearly transparent,
  7. stirringThe mixture was stirred
  8. temperatureheated in a 100° C. oil bath for an additional 2 h (internal temperature of 93° C.)
  9. temperatureThe mixture was cooled
  10. stirringwith stirring
  11. filtrationfiltered
  12. customto remove any suspended solid

出典と根拠

ORDレコード
ord-0b16e048396b4a70b4066d0539157142
出典データセット
uspto-grants-2003_05
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06559255B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート