ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Butyl Acrylate → Butyl Acrylate 4-styrenesulfonic Acid Sodium Salt

HRID 411791
印刷

反応式

HRID 411791 の反応式
O.[Na+:2].[CH2:3]=[CH:4][C:5]1[CH:10]=[CH:9][C:8]([S:11]([O-:14])(=[O:13])=[O:12])=[CH:7][CH:6]=1.[C:15]([O:19][CH2:20][CH2:21][CH2:22][CH3:23])(=[O:18])[CH:16]=[CH2:17]>O>[C:15]([O:19][CH2:20][CH2:21][CH2:22][CH3:23])(=[O:18])[CH:16]=[CH2:17].[Na+:2].[CH2:3]=[CH:4][C:5]1[CH:6]=[CH:7][C:8]([S:11]([O-:14])(=[O:13])=[O:12])=[CH:9][CH:10]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

4

反応物 2

HCID 8846Butyl AcrylateHCID 23681144Sodium 4-ethenylbenzene-1-sulfonate--water (1/1/1)

生成物 1

HCID 131723882Butyl Acrylate 4-styrenesulfonic Acid Sodium Salt

試薬・触媒・溶媒 1

HCID 962Water溶媒2 回

反応条件

温度
75 °C

実験手順

In a 250 mL Morton flask (fitted with mechanical stirrer, thermometer, and oil bath heating) under argon atmosphere were combined 4-styrenesulfonic acid sodium salt hydrate (0.20 g), butyl acrylate (Aldrich, 20.0 g), α-olefin sulfonate surfactant (Rhodia, Rhodacal A-246/L, 25.0 g of a ca. 40% aqueous solution), and water (145 g). The mixture was stirred and heated in a 90° C. oil bath until an internal temperature of ca. 75° C. was obtained, and then a solution of initiator (K2S2O8, Aldrich, 0.40 g, dissolved in 10 mL H2O) was added all at once via a syringe. The appearance of the nearly opaque aqueous monomer emulsion changed quickly over less than 5 minutes to form a translucent, bluish scattering emulsion. The mixture was stirred and heated for an additional 6 h in the 90° C. oil bath to decompose the excess initiator. The mixture was cooled with stirring, and filtered to remove a small amount of suspended solid. Yield 197.5 g of emulsion, pH ca. 3.5 to pH paper, 15.75% solids, particle size=14.7 nm Rh, by DLS, (2nd cumulant analysis PDI=0.18).

後処理

  1. customIn a 250 mL Morton flask (fitted with mechanical stirrer
  2. temperaturethermometer, and oil bath heating) under argon atmosphere
  3. customwas obtained
  4. additionwas added all at once via a syringe
  5. waitThe appearance of the nearly opaque aqueous monomer emulsion changed quickly over less than 5 minutes
  6. customto form a translucent, bluish scattering emulsion
  7. stirringThe mixture was stirred
  8. temperatureheated for an additional 6 h in the 90° C. oil bath
  9. temperatureThe mixture was cooled
  10. stirringwith stirring
  11. filtrationfiltered
  12. customto remove a small amount of suspended solid

出典と根拠

ORDレコード
ord-bb87833e259b42cd8587b1559ba59d45
出典データセット
uspto-grants-2003_05
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06559255B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート