Benzoic Acid → 3-{[5-(azetidin-1-ylcarbonyl)pyrazin-2-yl]oxy}-5-[(1S)-2-methoxy-1-methylethoxy]benzoic acid

関与物質

反応条件

反応手順

3-Hydroxy-5-[(1S)-2-methoxy-1-methylethoxy]benzoic acid (5.00 g, 22.10 mmol) and tetra n-butyl phosphonium chloride (6.53 g, 22.1 mmol) were suspended in 2-methyltetrahydrofuran (25 ml, 5 vol rel. to the benzoic acid) and 22 mL water at ambient temperature under nitrogen. Solid potassium carbonate (27.98 g, 202.4 mmol) was charged portionwise with vigorous mechanical stirring. At the end of addition KOH liquor (2.46 g 50% wt/wt in water, 22.1 mmol) was added before the biphasic slurry was heated to 50° C. Once the temperature had stabilised, 2-(azetidin-1-ylcarbonyl)-5-chloropyrazine (4.586 g, 23.21 mmol) was charged portionwise over 40 minutes and the mixtures was stirred over night under nitrogen at 50° C. The phases were split and the lower aqueous phase was run off 25 ml of toluene and 50 mL water were added to the remaining dark red organic phase. The pH of the aqueous phase was then adjusted to 7.0 using conc. hydrochloric acid. The jacket temperature was adjusted to 20° C. and the phases were separated again (the lower aqueous phase was run off and retained; the upper organic phase was discarded). The aqueous phase was washed with more toluene (25 mL). After phase separation the toluene phase was removed again. The pH of the retained aqueous phase was adjusted to 2.1 using 5M hydrochloric acid solution (7.1 mL). Isopropyl acetate (34.9 g) was charged and the jacket temperature was raised to 80° C. Equilibration was performed with the jacket temperature set to 80° C. After phase split the lower aqueous phase was run off again and back-extracted with more isopropyl acetate (17.4 g). The organic phases were combined and homogenised at 80° C. before being washed with water (10 mL). The organic phase was dried by azeotropic distillation under slight vacuum at constant batch volume (batch partially crystallised). The suspension was cooled to 0° C. over 13.5 h and the batch was isolated by filtration followed by a cake-wash with isopropyl acetate (17.4 g). After drying at 40° C. in a vacuum oven overnight 5.25 g at 96% strength (59% corrected yield) of the desired product was obtained as white solid.

情報源と証拠