ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.2
  1. ホーム
  2. /反応

2,3-Dichlorobenzaldehyde → 4,7-Dihydro-5-methyl-7-(1-methylethyl)pyrazolo[1,5-a]pyrimidine-6-carboxylic Acid 1,1-dimethylethyl Ester

HRID 49273
印刷

反応式

HRID 49273 の反応式
Cl[C:2]1[C:9](Cl)=[CH:8][CH:7]=[CH:6][C:3]=1[CH:4]=[O:5].[C:11]([O:15]CC(=O)CC([O-])=O)([CH3:14])([CH3:13])[CH3:12].[NH2:23][C:24]1[CH:28]=[CH:27][NH:26][N:25]=1.[C:29]([O-])(=O)C.[Na+]>CN(C)C=O>[CH3:14][C:11]([O:15][C:4]([C:3]1[CH:2]([CH:9]([CH3:8])[CH3:29])[N:25]2[N:26]=[CH:27][CH:28]=[C:24]2[NH:23][C:6]=1[CH3:7])=[O:5])([CH3:12])[CH3:13]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

6

反応物 4

HCID 357452,3-DichlorobenzaldehydeHCID 517045Sodium AcetateHCID 17886005t-ButoxyacetoacetateHCID 178418806HCID 178418806、化合物

生成物 1

HCID 1354069184,7-Dihydro-5-methyl-7-(1-methylethyl)pyrazolo[1,5-a]pyrimidine-6-carboxylic Acid 1,1-dimethylethyl Ester収率 41.7%

試薬・触媒・溶媒 1

HCID 6228
Dimethylformamide
溶媒

反応条件

温度
75 °C

実験手順

A pressure tube was dried with a heat gun under nitrogen. The pressure tube was charged in the following order with isobutyraldehyde 2(0.262 g, 3.63 mmol), dimethylformamide (3 mL), t-butylacetoacetate 1 (0.574 g, 3.63 mmol), 3-aminopyrazole 3 (0.362 g, 4.36 mmol) and sodium acetate (1.22 g, 14.5 mmol). The mixture was flushed with nitrogen. The tube was sealed and warmed to 75° C. and stirred overnight. The mixture was cooled to room temperature, diluted with ethyl acetate to a volume of 20 mL, washed with lithium chloride (2.4M, 10 mL) and brine, dried over anhydrous sodium sulfate, filtered and concentrated to give 1.02 of a yellow oil. The oil was purified by flash chromatography (silica, 45% ethyl acetate/heptane) to give 0.42 g (41% yield) of the title compound. Reverse Phase HPLC: YMC S5 ODS 4.6×50 mm Ballistic column, UV detection at 220λ, 4 min. gradient 0-100% Solvent B/A (Solvent A: 10% MeOH/H2O with 0.2% PPA, Solvent B: 90% MeOH/H2O with 0.2% PPA), 4 mL/min. Rt=3.83 min, (100% pure). Reverse Phase LC/MS: YMC S5 ODS 4.6×50 mm Ballistic column, UV detection at 220λ, 4 min. gradient 0-100% Solvent B/A (Solvent A: 10% MeOH/H2O with 0.1% TFA, Solvent B: 90% MeOH/H2O with 0.1% TFA), 4 mL/min. Rt=3.06 min. MS (EM, M+1: 278). HMR (CDCl3, 400 MHz): 7.37(1H,d,J=2.2 Hz), 6.35(1H,s), 5.55(1H,d,J=1.8 Hz), 5.29(1H,d,J=2.2 Hz), 2.41(3H,s), 1.50(9H,s), 1.28-1.19(1H,m), 1.07(3H,d,J=7.0 Hz), 0.60(3H,d,J=7.0 Hz).

後処理

  1. customA pressure tube was dried with a heat gun under nitrogen
  2. customThe mixture was flushed with nitrogen
  3. customThe tube was sealed
  4. temperatureThe mixture was cooled to room temperature
  5. additiondiluted with ethyl acetate to a volume of 20 mL
  6. washwashed with lithium chloride (2.4M, 10 mL) and brine
  7. dry with materialdried over anhydrous sodium sulfate
  8. filtrationfiltered
  9. concentrationconcentrated
  10. customto give 1.02 of a yellow oil
  11. customThe oil was purified by flash chromatography (silica, 45% ethyl acetate/heptane)

出典と根拠

ORDレコード
ord-2d0ce4b777ca42dd8b5f9ac383d844e0
出典データセット
uspto-grants-2004_03
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06706720B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート