ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.0
  1. ホーム
  2. /反応

Sulfuric Acid → HCID 9899903、化合物

HRID 49583
ノート
印刷プレビュー

反応式

HRID 49583 の反応式
S(=O)(=O)(O)[OH:2].[F:6][C:7]([F:22])([F:21])[C:8]1[CH:13]=[CH:12][C:11]([NH:14][C@H:15]([CH2:19][CH3:20])[CH2:16][C:17]#[N:18])=[CH:10][CH:9]=1>C1(C)C=CC=CC=1>[F:6][C:7]([F:21])([F:22])[C:8]1[CH:9]=[CH:10][C:11]([NH:14][C@H:15]([CH2:19][CH3:20])[CH2:16][C:17]([NH2:18])=[O:2])=[CH:12][CH:13]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

4

反応物 2

HCID 1118Sulfuric AcidHCID 9856211(3R)-3-(4-Trifluoromethyl-phenylamino)-pentanenitrile

生成物 1

HCID 9899903HCID 9899903、化合物収率 75%

試薬・触媒・溶媒 1

HCID 1140Toluene溶媒

反応条件

温度
35 °C

実験手順

Aqueous sulfuric acid (8.2 L sulfuric acid and 1.1 L water premixed and cooled to 35° C. or less) was added to the crude toluene solution of (3R)-3-(4-trifluoromethyl-phenylamino)-pentanenitrile from Example 1. The resulting bilayer was stirred well and heated to 35° C. for 17 hours. The lower aqueous layer was collected and quenched with aqueous sodium hydroxide (95 L water and 10.7 kg sodium hydroxide) and diisopropyl ether (IPE) (40 L). After extraction and removal of the aqueous layer, the organic layer was combined and extracted with saturated aqueous NaHCO3 (10 L). The organic phase from the resulting bilayer was concentrated by distillation to a volume of 19 L. The solution was then cooled to room temperature and seeded with (3R)-3-(4-trifluoromethyl-phenylamino)-pentanoic acid amide and allowed to granulate for 3 hours while stirring. To the heterogenous mixture was added cyclohexane (38 L) and the mixture was granulated for an additional 11 hours. The solids were filtered, rinsed with cyclohexane (4 L), dried under vacuum at 40° C. to afford 3021 g (75%) of the title compound.

後処理

  1. customThe lower aqueous layer was collected
  2. customquenched with aqueous sodium hydroxide (95 L water and 10.7 kg sodium hydroxide) and diisopropyl ether (IPE) (40 L)
  3. extractionAfter extraction and removal of the aqueous layer
  4. extractionextracted with saturated aqueous NaHCO3 (10 L)
  5. concentrationThe organic phase from the resulting bilayer was concentrated by distillation to a volume of 19 L
  6. temperatureThe solution was then cooled to room temperature
  7. stirringwhile stirring
  8. additionTo the heterogenous mixture was added cyclohexane (38 L)
  9. waitthe mixture was granulated for an additional 11 hours
  10. filtrationThe solids were filtered
  11. washrinsed with cyclohexane (4 L)
  12. customdried under vacuum at 40° C.

出典と根拠

ORDレコード
ord-f4adc332454143d18744bdd3223d27aa
出典データセット
uspto-grants-2004_03
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06706881B2

反応ノート

読み込み中…

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート