ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

1-Octene → 1-Octene t-butylstyrene divinylbenzene

HRID 516195
印刷

反応式

HRID 516195 の反応式
[CH2:1]=[CH:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH3:8].[C:9]([CH:13]=[CH:14][C:15]1[CH:20]=[CH:19][CH:18]=[CH:17][CH:16]=1)([CH3:12])([CH3:11])[CH3:10]>C1(C)C=CC=CC=1>[CH2:1]=[CH:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH3:8].[C:9]([CH:13]=[CH:14][C:15]1[CH:16]=[CH:17][CH:18]=[CH:19][CH:20]=1)([CH3:12])([CH3:10])[CH3:11].[CH:2]([C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][C:4]=1[CH:9]=[CH2:10])=[CH2:1]
参加物実験手順後処理出典と根拠反応ノート

参加物

4

反応物 2

HCID 81251-OcteneHCID 138033tert-Butylstyrene

生成物 1

HCID 866624871-Octene t-butylstyrene divinylbenzene

試薬・触媒・溶媒 1

HCID 1140Toluene溶媒

実験手順

The polymerization reaction was conducted in a 300 ml stainless autoclave equipped with a mechanical stirrer. In an argon filled dry-box, the reactor was charged with 50 ml of toluene, 0.2 ml of DVB, and various volume ratios of 1-octene and tert-butylstyrene (Oct/BSt=7/3, 6/4, 5/5, 6/4, and 7/3 ml). The reactor was then sealed and then moved from the dry box and purged with nitrogen gas at 30° C. About 0.101 g of TiCl3(AA) and 1 ml of AlCl2Et in 10 ml of toluene, after mixing for 20 minutes by stirring, were introduced to the reactor under nitrogen pressure to initiate the polymerization. After about 1 hour, the reaction was terminated by adding 100 ml of dilute HCl solution in methanol to the reactor. The 1-octene/t-butylstyrene/divinylbenzene terpolymers were isolated by filtration and washed completely with methanol and dried under vacuum for about 8 hours. The resulting terpolymers were completely soluble in common organic solvents, including toluene and decalin. Before absorption measurement, the resulting terpolymers were divided into ½ inch sized particles and heated in an oven at about 220° C. for about 2 hours to obtain fully cross-linked samples. Table 3 provides absorption capacity data for the samples in toluene after 5 hours and 16 hours.

後処理

  1. customThe polymerization reaction
  2. customequipped with a mechanical stirrer
  3. customThe reactor was then sealed
  4. custompurged with nitrogen gas at 30° C
  5. additionAbout 0.101 g of TiCl3(AA) and 1 ml of AlCl2Et in 10 ml of toluene, after mixing for 20 minutes
  6. additionwere introduced to the reactor under nitrogen pressure
  7. customthe polymerization
  8. customthe reaction was terminated
  9. additionby adding 100 ml of dilute HCl solution in methanol to the reactor

出典と根拠

ORDレコード
ord-436597a392bb4bc08ca9aa3a8b13d267
出典データセット
uspto-grants-2015_08
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US09109057B2

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート