戻る
化工社化工社 化学情報印刷レポート · 研究参考用
HRID 53411作成日:2026年10月26日

Formaldehyde → 2-Butyl-2-ethyl-1,3-propanediol

https://huagongshe.com/reaction/53411

反応式

関与物質

役割名称HCID仕込み量
反応物FormaldehydeHCID 712—
反応物Sulfuric AcidHCID 1118—
反応物2-EthylhexanalHCID 31241—
反応物3-OctanoneHCID 246728—
触媒Trioctylmethylammonium chlorideHCID 21218—
触媒Tetrabutylammonium hydrogen sulfateHCID 94433—
生成物2-Butyl-2-ethyl-1,3-propanediolHCID 61038—

反応手順

The molar ratio of the 2-ethyl hexanal to the formaldehyde, used as the initial materials of the reaction, should be within the range 1:2 to 1:4, preferably within the range 1:2.5 to 1:3.5. To the mixture is added a neutral or cationic phase transfer catalyst, such as neutral polyethylene glycol (e.g. PEG 400) or a cationic tetrabutylammoniumhydrogen sulfate (TBAHSO4) or tricaprylmethylammonium chloride (Aliquat 336). These are added in an amount of 1-50% by weight, preferably 5-30% by weight, of the mass of the formalin solution or, if solid paraformaldehyde is used, in an amount of 1-20% by weight, preferably 3-10% by weight, of the mass of the aqueous solution and solid paraformaidehyde, or in an amount of 1-50% by weight, preferably 5-15% by weight, of the amount of 2-ethyl hexanal. The mixture of the initial materials is heated to 30°-100° C., preferably to 50°-80° C., and most preferably to 60°-80° C., and an aqueous solution of the alkali metal hydroxide or earth alkali metal hydroxide is added to the mixture, drop by drop, in the course of up to 5 h, preferably 1-3 h, and the reaction is continued at the said temperature for up to 3 h, preferably 15 min-2 h, most preferably 15 min-1 h 15 min. The alkali metal hydroxide or earth alkali metal hydroxide is used in a molar amount 1:1 to 2:1, preferably in a molar amount of 1.25:1 to 1.75:1 to that of 2:1-ethyl hexanal. After this reaction step the mixture is neutralized with an organic acid or a mineral acid, preferably for example sulfuric acid, and the phases are separated from each other, preferably while they are hot. The organic phase is washed with water once or several times, preferably 1-2 times, by using for the wash an amount of water at minimum 50% of the mass of the organic phase. The phases are separated and the organic phases are combined and vacuum distilled. The boiling point of the final product is 130°-132° C./9 mmHg. The yield obtained for 2-n-butyl-2-ethyl-1,3-propane diol was up to more than 92%, depending on the reaction conditions and the molar proportions.

情報源と証拠

DOI10.6084/m9.figshare.5104873.v1
特許番号US05618985
出典データセットuspto-grants-1997_04
ORD IDord-0a3b12ba229f46b59d238f05947e5219
出典メモuspto-grants-1997_04