ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

2,3,5-Trimethylpyridine → 3,5-Dimethylpyridine

HRID 542570
印刷

反応式

HRID 542570 の反応式
[N:1]1[CH:6]=[C:5]([CH3:7])[CH:4]=[C:3]([CH3:8])[C:2]=1[CH3:9].C[C:11]1[C:16]([CH3:17])=[CH:15][C:14]([CH3:18])=[C:13](C)[N:12]=1>>[N:1]1[CH:6]=[C:5]([CH3:7])[CH:4]=[C:3]([CH3:8])[C:2]=1[CH3:9].[N:12]1[CH:13]=[C:14]([CH3:18])[CH:15]=[C:16]([CH3:17])[CH:11]=1
参加物実験手順後処理出典と根拠反応ノート

参加物

4

反応物 2

HCID 127592,3,5-TrimethylpyridineHCID 195622,3,5,6-Tetramethylpyridine

生成物 2

HCID 115653,5-DimethylpyridineHCID 127592,3,5-Trimethylpyridine

実験手順

Into a 1-liter electromagnetic agitation type autoclave equipped with a reflux condenser were charged 321 g of 3,5-lutidine and 64 g of Raney cobalt, and the air in the vessel was replaced with hydrogen gas, after which the internal temperature was raised to 240° C. Next, 570 g of methanol was continuously introduced thereinto under pressure by means of a constant volume delivery pump over a period of 7 hours. During the introduction of methanol, the produced gas was intermittently liberated outside the reaction system so as to keep the internal pressure of the autoclave in the range of 45 to 60 kg/cm2. After the reaction was completed, the autoclave was cooled to room temperature, and the contents were taken out. The catalyst was removed by filtration, after which 30 g of sodium hydroxide was added to the filtrate, and the resulting mixture was separated by using a separating funnel to obtain 400 g of an oily substance. When the oily substance obtained was distilled by using a Dixon packed tower, there were obtained 32 g of 3,5-lutidine of 99% purity as measured by gas chromatography at a tower top temperature of 90° to 93° C./50 mmHg, 314,4 g of 2,3,5-collidine of 99.3% purity as measured by gas chromatography at a tower top temperature of 102° to 103° C./50 mmHg, and 13.9 g of 2,3,5,6-tetramethylpyridine of 99% purity as measured by gas chromatography at a tower top temperature of 112° C./50 mmHg. The yield of the product 2,3,5-collidine obtained from 3,5-lutidine used as a starting material was 86%, and that of 2,3,5,6-tetramethylpyridine obtained therefrom was 3.4%. The selectivities of the above-mentioned products were 96.3% and 3.7%, respectively.

後処理

  1. customas measured by gas chromatography at a tower top temperature of 112° C./50 mmHg

出典と根拠

ORDレコード
ord-94a41a858ebd40d0b82d38d729d7f930
出典データセット
uspto-grants-1987_04
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US04658032

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート