N,N'-Dimethylethylenediamine → 2-Amino-5-cyano-N,3-dimethylbenzamide

HRID 554699

反応式

HRID 554699 の反応式
[OH-].[Na+].Cl[O-].[Na+].[NH2:6][C:7]1[C:16]([CH3:17])=[CH:15][C:14](Br)=[CH:13][C:8]=1[C:9]([NH:11][CH3:12])=[O:10].[C-]#N.[Na+].[CH3:22][NH:23]CCNC>[Cu]I>[NH2:6][C:7]1[C:16]([CH3:17])=[CH:15][C:14]([C:22]#[N:23])=[CH:13][C:8]=1[C:9]([NH:11][CH3:12])=[O:10]

参加物

6

反応物 4

HCID 8070N,N'-DimethylethylenediamineHCID 8929Sodium CyanideHCID 442275752-amino-5-bromo-N,3-dimethylbenzamideHCID 86647248NaOH NaClO

生成物 1

HCID 251572822-Amino-5-cyano-N,3-dimethylbenzamide

試薬・触媒・溶媒 1

HCID 24350Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)触媒

実験手順

A 500-mL four-necked flask equipped with a mechanical stirrer, thermocouple, condenser and sodium hydroxide/sodium hypochlorite scrubber was charged with 2-amino-5-bromo-N,3-dimethylbenzamide (prepared by the method of Example 1) (99.1% purity, 24.1 g, 0.10 mol) and xylenes (100 g) while maintaining an atmosphere of argon through a gas inlet line connected to the condenser. The mixture was stirred at room temperature, and powdered sodium cyanide (powdered just prior to use) (6.2 g, 0.121 mol, assuming 95% purity), copper(I) iodide (2.9 g, 0.015 mol) and N,N′-dimethylethylenediamine (7.6 g, 0.085 mol) were added. Stirring was continued for an additional 15 to 20 minutes while the mixture was purged with argon, after which time the mixture was maintained under an argon atmosphere. The mixture was heated at reflux (about 140° C.), while venting through the scrubber. After 4.5 h the mixture was cooled to 25° C., water (100 mL) was added over 5 minutes, and stirring was continued for an additional 30 minutes. The mixture was filtered and the solid collected was washed with water (2×50 mL) and xylenes (50 mL), and then dried to a constant weight in a vacuum-oven at 55° C. to give the title compound (18.2 g) as an off-white solid melting at 203-204° C.

後処理

  1. customA 500-mL four-necked flask equipped with a mechanical stirrer
  2. temperaturewhile maintaining an atmosphere of argon through a gas inlet line
  3. stirringStirring
  4. customwas purged with argon
  5. temperatureafter which time the mixture was maintained under an argon atmosphere
  6. temperatureThe mixture was heated
  7. temperatureat reflux (about 140° C.)
  8. temperatureAfter 4.5 h the mixture was cooled to 25° C.
  9. additionwater (100 mL) was added over 5 minutes
  10. stirringstirring
  11. waitwas continued for an additional 30 minutes
  12. filtrationThe mixture was filtered
  13. customthe solid collected
  14. washwas washed with water (2×50 mL) and xylenes (50 mL)
  15. customdried to a constant weight in a vacuum-oven at 55° C.

出典と根拠

ORDレコード
ord-befd14c6248a4592bfff7e592fb7d350
出典データセット
uspto-grants-2011_11
特許番号
US08049029B2

関連ノート

読み込み中…