Edetate Sodium → Anecortave Acetate

関与物質

反応条件

反応手順

17α-hydroxy-20-phenoxy-pregna-4,9(11), 20-trien-3-one (20.0 grams, 49.5 mmoles) is slurried in a mixture of pH 8 potassium phosphate buffer (100 ml, 0.1M PO4 ≡) and water (100 ml). Acetone (20 ml) methylene chloride (200 ml) and polyethylene glycol (3.0 g avg. MW=300) are added and the two phase mixture heated to 35° C. and adjusted to pH 8.5 with potassium hydroxide. OXONE® (2KHSO5.KHSO4.K2SO4), 30 g, 48.8 mmoles) is dissolved in water (110 ml) containing (10 ml of a 5% by weight solution of sodium edetate) and the (Na4EDTA) solution added dropwise over 1 hour with vigorous agitation while maintaining the pH at 8.3 to 8.5 When the reaction is complete, the phases are separated hot and the aqueous phase extracted twice with 50 ml of methylene chloride. The combined organics are washed twice with 100 ml of aqueous 5% sodium hydroxide and clarified thru through solka flok (10 g). The solvent is removed by distillation and replaced with tetrahydrofuran to a final volume of 150 ml. Water (3 ml) containing fluoboric acid (0.3 ml of 50%) is added to hydrolyze the epoxide at 45-50° C. After 1 hour, acetic anhydride (30 ml, 318 mmoles), triethylamine (0.35 ml, 2.63 mmoles) and N,N-dimethylaminopyridine (0.1 g, 0.47 mmoles) are added at 55° C. to acetylate the 21-alcohol. When complete, tetrahydrofuran is replaced with acetone by atmospheric distillation to a final volume of 100 ml. 17α-hydroxy-21-acetoxypregna-4,9(11)-diene-3,20-dione was isolated by filtration and drying under vacuum at 60° to yield 16.7 g.

情報源と証拠