戻る
化工社化工社 化学情報印刷レポート · 研究参考用
HRID 83772作成日:2026年10月25日

Oxygen → 3-Hydroxy-1-adamantyl acrylate

https://huagongshe.com/reaction/83772

反応式

関与物質

役割名称HCID仕込み量
反応物OxygenHCID 977—
反応物Sulfuric AcidHCID 1118—
反応物Acrylic AcidHCID 6581—
反応物4-MethoxyphenolHCID 9015—
反応物Sodium HydroxideHCID 14798—
反応物1,3-AdamantanediolHCID 573829—
溶媒WaterHCID 962—
溶媒TolueneHCID 1140—
生成物3-Hydroxy-1-adamantyl acrylateHCID 22228790—

反応手順

To a 2 L jacket-equipped separable flask provided with a stirrer, a thermometer, a Dean-Stark water separator, a Dimroth condenser and a prepared gas introduction tube, 84 g of 1,3-adamantanediol, 108 g of acrylic acid, 0.76 g of p-methoxyphenol as a polymerization inhibitor, 1.3 g of concentrated sulfuric acid as an acid catalyst, and 750 ml of toluene as a solvent were put. Prepared gas diluted with nitrogen so as to have an oxygen concentration of about 5% by volume was supplied at a rate of 0.2 L/min. The reaction operation was performed as follows. While the solution was heated and water generated as a secondary product was removed by the Dean-Stark water separator, the reflux state was continued for 6 hours. Thus, 3-hydroxy-1-adamantyl acrylate was synthesized. The obtained reaction solution was cooled down to room temperature, and then a 10% by weight of aqueous solution of sodium hydroxide was added while stirring to neutralize the residual acrylic acid and sulfuric acid. Then, the neutralized water phase was drawn out from the two-phase solution. To the residual organic phase, 0.85 g of p-methoxyphenol was added as a polymerization inhibitor. The resultant solution was washed with 5% by weight of dilute sulfuric acid and with 500 ml of ion exchange water, twice for each. After the washing, precise filtration was performed by use of a Teflon® filter having a pore diameter of 0.1 μm. Then, cooling crystallization was performed at a temperature of an ice water bath to separate the crystal by filtration. The crystal was rinsed with heptane twice, and then dried at a reduced pressure at 25° C. for 24 hours. During the process from the dehydration esterification reaction to the solid-liquid separation and until the termination of rinsing performed by use of ion exchange water, the prepared gas was kept blown into the solution. Table 1 shows the analysis results of the obtained 3-hydroxy-1-adamantyl acrylate. Methylethylketone was used as the solvent for measuring the turbidity.

情報源と証拠

DOI10.6084/m9.figshare.5104873.v1
特許番号US08846840B2
出典データセットuspto-grants-2014_09
ORD IDord-5b49aa7245f240439839520096704a9f
出典メモuspto-grants-2014_09