ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Water → 1-(4-Nitrobenzyl)-1H-1,2,4-triazole

HRID 865789
印刷

反応式

HRID 865789 の反応式
[N+:1]([C:4]1[CH:11]=[CH:10][C:7]([CH2:8]Br)=[CH:6][CH:5]=1)([O-:3])=[O:2].N[N:13]1[CH:17]=[N:16][N:15]=[CH:14]1.O>C(O)(C)C>[N+:1]([C:4]1[CH:11]=[CH:10][C:7]([CH2:8][N:15]2[CH:14]=[N:13][CH:17]=[N:16]2)=[CH:6][CH:5]=1)([O-:3])=[O:2]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

5

反応物 3

HCID 962WaterHCID 114324-Amino-1,2,4-triazoleHCID 660114-Nitrobenzyl bromide

生成物 1

HCID 64820001-(4-Nitrobenzyl)-1H-1,2,4-triazole収率 83.3%

試薬・触媒・溶媒 1

HCID 3776Isopropanol溶媒2 回

反応条件

温度
-2 °C

実験手順

4-Nitrobenzyl bromide (64.22 g), 4-amino-1,2,4-triazole (26 g) and isopropyl alcohol (586 ml) were stirred together at reflux for 71/2 hours. The isopropanol solvent was replaced with water by using an azeotropic distillation procedure, in vacuo, on a Buchi rotary evaporator. The volume of the final aqueous slurry was 750 ml. 675 ml of this slurry was cooled to -2° C. and hydrochloric acid (50.8 ml, 12 M) added over a few minutes. A solution of sodium nitrite (21.7 g) in water (86 ml) was then added dropwise, and subsurface over a 40 minute period. The temperature of the batch was kept between -2° and -1° C. during the addition and then allowed to warm to 18° C. over 30 minutes. The temperature was then increased to 28° C. and held for 1 hour and the solution treated with charcoal (4.5 g, Fisons) for 15 minutes. The charcoal was removed and the filtrate (750 ml) divided equally in two. One half of the solution was made basic with ammonia solution (22 ml) and the precipitated base collected, washed with water (2×30 ml) and dried (16 hours at 35° C. in vacuo). This gave an 83.3% yield (22.73 g) of 1-(4-nitrobenzyl)-1,2,4-triazole.

後処理

  1. temperatureat reflux for 71/2 hours
  2. distillationan azeotropic distillation procedure
  3. customin vacuo, on a Buchi rotary evaporator
  4. additionhydrochloric acid (50.8 ml, 12 M) added over a few minutes
  5. additionA solution of sodium nitrite (21.7 g) in water (86 ml) was then added dropwise
  6. additionThe temperature of the batch was kept between -2° and -1° C. during the addition
  7. temperatureto warm to 18° C. over 30 minutes
  8. temperatureThe temperature was then increased to 28° C.
  9. waitheld for 1 hour
  10. additionthe solution treated with charcoal (4.5 g, Fisons) for 15 minutes
  11. customThe charcoal was removed
  12. customthe precipitated base collected
  13. washwashed with water (2×30 ml)
  14. customdried (16 hours at 35° C. in vacuo)

出典と根拠

ORDレコード
ord-6a32cf1ea0994d4c83f63fe40e16771f
出典データセット
uspto-grants-1996_10
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US05567819

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート