ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Ethanol → HCID 178518057、化合物

HRID 880586
印刷

反応式

HRID 880586 の反応式
N1C=C([C:6]2[C:7]3[CH:14]=[CH:13][N:12](COCC[Si](C)(C)C)[C:8]=3[N:9]=[CH:10][N:11]=2)C=N1.[O-:23]CC.[Na+].C(O)C.C(OC(=O)C(C#N)CC(OCC)OCC)C>>[N:9]1[C:8]2[NH:12][CH:13]=[CH:14][C:7]=2[C:6]([OH:23])=[N:11][CH:10]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

5

反応物 4

HCID 702EthanolHCID 2723922Sodium ethoxideHCID 4151505Ethyl 2-cyano-4,4-diethoxybutyrateHCID 426313464-(1H-Pyrazol-4-yl)-7-(2-(trimethylsilyl)ethoxy)methyl-7 H-pyrrolo(2,3-d)-pyrimidine

生成物 1

HCID 178518057HCID 178518057、化合物収率 68.3%

反応条件

温度
45 °C

実験手順

Formamidine acetate (5, 1.04 Kg, 10 mol, 1.25 equiv) was added to 7.52 L of (21% wt) sodium ethoxide (EtONa) in ethanol (EtOH, 62.5 equiv) and the resulting solution was stirred for 60 minutes. 2-cyano-4,4-diethoxy-butyric acid ethyl ester (4, 1.8 Kg, 8.0 mol) was then added and the resulting reaction mixture was refluxed for seven hours. The stirring was turned off after the solution was cooled and the solids were allowed to settle. The supernatant ethanol solution was removed, leaving the solids in the bottom of the reaction flask. The ethanol was evaporated and the residue was added back to the solids remaining in the reaction flask with water and ice at a ratio of 600 mL/mol. A solution of 6 N aqueous HCl was added to the resulting solution at a ratio of 500 mL/mol at 15° C. The resulting solution was then heated at 45° C. for 45 minutes. The solution was again cooled to 15° C. and the pH was adjusted to 8.0 with the addition of aqueous ammonium hydroxide. The precipitated solids were collected by filtration, washed with water (2×225 mL/mol) and pulled dry. The solids were further washed with 1:1 ethyl acetate/heptane (500 mL/mol), then heptane (2×250 mL/mol) and dried in vacuum to afford 7H-pyrrolo[2,3-d]pyrimidin-4-ol (7, 738.6 g, 1081 g theoretical, 68.3%) as yellow to brown to yellow crystalline material. For 7: 1H NMR (DMSO-d6, 300 MHz) δ ppm 11.88 (bs, 1H), 11.80 (bs, 1H), 7.81 (s, 1H), 7.02 (dd, 1H, J=3.2, 2.3 Hz), 6.42 (dd, 1H, J=3.5, 2.3 Hz); C6H5N3O (MW, 135.12), LCMS (EI) m/e 136 (M++H) and (M++Na) m/e 158.

後処理

  1. customthe resulting reaction mixture
  2. temperaturewas refluxed for seven hours
  3. temperaturewas cooled
  4. customThe supernatant ethanol solution was removed
  5. customleaving the solids in the bottom of the reaction flask
  6. customThe ethanol was evaporated
  7. additionthe residue was added back to the solids
  8. additionA solution of 6 N aqueous HCl was added to the resulting solution at a ratio of 500 mL/mol at 15° C
  9. temperatureThe solution was again cooled to 15° C.
  10. additionthe pH was adjusted to 8.0 with the addition of aqueous ammonium hydroxide
  11. filtrationThe precipitated solids were collected by filtration
  12. washwashed with water (2×225 mL/mol)
  13. custompulled dry
  14. washThe solids were further washed with 1:1 ethyl acetate/heptane (500 mL/mol)
  15. dry with materialheptane (2×250 mL/mol) and dried in vacuum

出典と根拠

ORDレコード
ord-2064031254744ae787b891c3febbb32c
出典データセット
uspto-grants-2015_03
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08993582B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート