ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.1
  1. ホーム
  2. /反応

3-Hexene → 1-Hexene

HRID 899721
印刷

反応式

HRID 899721 の反応式
[CH3:1][CH2:2][CH:3]=[CH:4][CH2:5][CH3:6].[CH3:7][CH2:8]/[CH:9]=[CH:10]\[CH2:11][CH3:12].CC/C=C/CC>CN(C=O)C>[CH3:1][CH2:2][CH:3]=[CH:4][CH2:5][CH3:6].[CH2:7]=[CH:8][CH2:9][CH2:10][CH2:11][CH3:12]
参加物実験手順後処理出典と根拠反応ノート

参加物

6

反応物 3

HCID 116013-Hexene2 回HCID 638066trans-3-HexeneHCID 643783cis-3-Hexene

生成物 2

HCID 115971-HexeneHCID 116013-Hexene

試薬・触媒・溶媒 1

HCID 6228Dimethylformamide溶媒2 回

実験手順

The 3-hexene feedstock was assumed to have a composition of 33 wt % cis-3-hexene and 67 wt % trans-3-hexene. The normal boiling points for 1-, 2-, and 3-hexene are listed in Example 2. The normal boiling for DMF, the extraction solvent in this example, is 152° C. (305° F.). The isomerization reaction was assumed to occur at the bottom of the column. The column was assumed to have 150 theoretical stages, a kettle reboiler, and a total condenser. The operating conditions for the column consisted of a pressure of 7 atm, condenser temperature of 140° C. (283° F.), and reboiler temperature of 232° C. (450° F.). In addition, 100 lb/hr of DMF was added to the 10th theoretical stage of the column (near the top). This resulted in a column with a diameter of 11.8 ft and a reflux ratio of 518. For this case, the 1000 lb/hr 3-hexene feed resulted in 980 lb/hr of 99 wt % 1-hexene product. The column bottoms contained 91 wt % DMF, which can be recycled back to the column. A detailed material balance is shown in the following table. RXFEED is the distillation column feed stream, SOLVENT is the DMF extractive distillation solvent stream, BOTTOMS is the distillation column bottoms stream, and 1-HEXENE is the product stream, which is obtained from the top of the column.

後処理

  1. customis 152° C.
  2. custom(305° F.)
  3. customThe isomerization reaction
  4. customconsisted of a pressure of 7 atm, condenser temperature of 140° C. (283° F.), and reboiler temperature of 232° C. (450° F.)
  5. customThis resulted in a column with a diameter of 11.8 ft

出典と根拠

ORDレコード
ord-13949a2b85414dc8acd28fd3810dae48
出典データセット
uspto-grants-2008_04
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US07355087B2

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート