戻る
化工社化工社 化学情報印刷レポート · 研究参考用
HRID 986883作成日:2026年10月26日

Carbon Dioxide → 1,1,1,2,4,4,5,5,6,6,6-Undecafluoro-2-(trifluoromethyl)-3-hexanone

https://huagongshe.com/reaction/986883

反応式

関与物質

役割名称HCID仕込み量
反応物Carbon DioxideHCID 280—
反応物HexafluoropropyleneHCID 8302—
反応物Heptafluorobutyroyl fluorideHCID 67632—
反応物Potassium FluorideHCID 522689—
溶媒DiglymeHCID 8150—
生成物1,1,1,2,4,4,5,5,6,6,6-Undecafluoro-2-(trifluoromethyl)-3-hexanoneHCID 11143068665.2%

反応条件

温度85 °C

反応手順

Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of CF2═CFCF3 (hexafluoropropylene) was added at a pressure of 85 psig (5150 torr) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gcms.

情報源と証拠

DOI10.6084/m9.figshare.5104873.v1
特許番号US06630075B2
出典データセットuspto-grants-2003_10
ORD IDord-7caaac3f27924953b2d2fde2aac92f49
出典メモuspto-grants-2003_10