ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

1-Butene → 1-Butene 4-methyl-1-pentene

HRID 988019
印刷

反応式

HRID 988019 の反応式
[CH3:1][CH:2]([CH3:6])[CH2:3][CH:4]=[CH2:5].C=CCC>C1(C)C=CC=CC=1>[CH2:1]=[CH:2][CH2:3][CH3:4].[CH3:1][CH:2]([CH3:6])[CH2:3][CH:4]=[CH2:5]
参加物実験手順後処理出典と根拠反応ノート

参加物

4

反応物 2

HCID 78441-ButeneHCID 127244-Methyl-1-pentene

生成物 1

HCID 230019091-Butene 4-methyl-1-pentene

試薬・触媒・溶媒 1

HCID 1140Toluene溶媒

実験手順

On the other hand, in an egg-plant type flask with an inner volume of 25 ml replaced with argon, 5 ml of purified toluene and 1.2 mg of dichloro{2,2′-thiobis[4-methyl-6-(tert-butyl)phenolato} titanium were mixed by stirring, and then charged into the autoclave. The molar ratio of [Al]/[Ti] of the catalyst solution prepared then was 8,000. After the catalyst solution was mixed by stirring at room temperature for 10 minutes, 25.5 ml of 4-methyl-1-pentene and 16.8 g of 1-butene were charged and the polymerization was carried out at 40° C. for 1 hour. Then, the polymerization was terminated by adding methanol. Further, the mixture was charged into about 10-fold acidic methanol, and the precipitated polymer was filtered to be dried at 80° C. for about 2 hours. As a result, 0.8 g of poly(1-butene/4-methyl-1-pentene) copolymer was obtained. Mw of the polymer obtained was 793×104, Mn was 342×104, Mw/Mn was 2.3, and no crystal fusion peak by DSC was detected. The glass transition temperature (Tg) was observed at 17° C. and the polymer was amorphous.

後処理

  1. additionwere mixed
  2. additioncharged into the autoclave
  3. customThe molar ratio of [Al]/[Ti] of the catalyst solution prepared
  4. additionAfter the catalyst solution was mixed
  5. stirringby stirring at room temperature for 10 minutes
  6. customThen, the polymerization was terminated
  7. additionby adding methanol
  8. additionFurther, the mixture was charged into about 10-fold acidic methanol
  9. filtrationthe precipitated polymer was filtered
  10. customto be dried at 80° C. for about 2 hours

出典と根拠

ORDレコード
ord-d527d00635c14f6a903aa8e1e8b10d70
出典データセット
uspto-grants-2003_10
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06632900B2

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート