돌아가기
Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
HCID 13360생성일: 2026년 10월 26일

2-하이드록시에틸 메트아크릴산

2-하이드록시에틸메트아크릴산 · 2-하이드록시에틸메타크릴레이트 · 글리콜메타크릴레이트 · 메타아크릴산2-히드록시에틸 · 메타크릴산-2-하이드록시에틸 · 베타-하이드록GLYCOLMETHACRYLATE · 에틸렌글리콜모노메타크릴레이트 · 하이드록시에틸메타크릴산

https://huagongshe.com/ko/chemical/13360

2-하이드록시에틸 메트아크릴산 분자 구조식

식별자 및 물리적 특성

CAS No.12676-48-1
분자식C6H10O3
평균 분자량130.14 g/mol
단동위원소 질량130.06299418 g/mol
SMILESC=C(C)C(=O)OCCO
InChIKeyWOBHKFSMXKNTIM-UHFFFAOYSA-N
PubChem CID13360
ChEMBLCHEMBL1730239
ChEBICHEBI:34288
EC No.212-782-2
DTXSIDDTXSID7022128
현지명2-하이드록시에틸 메트아크릴산

화학 및 물리적 성질

XLogP0.5
극성 표면적46.5
수소 결합 공여자 수1
수소 결합 수용자 수3
회전 가능 결합 수4
무거운 원자 수9
형식 전하0
복잡도117
PolymersPlastics & Rubber -> (Meth)acrylates
화장품Cosmetic ingredients (HEMA) -> CIR (Cosmetic Ingredient Review)
LogP(분배 계수)log Kow= 0.470.42
밀도1.034 @ 25 °C/4 °C1.07 g/cm³1.034 @25 °C1.073 g/mL at 25 °C(lit.)
Viscosity8.4 mm²/s at 20 °C
Color/FormClear mobile liquid
용해도Miscible with water and soluble in common org solventsSolubility in water: miscible에 용해됨클로로포름, 메탄올 (약간 용해됨)
인화점97 °C (closed cup)97 °C c.c.207 °F
끓는 점67 °C @ 3.5 mm Hg250 °C (calculated)67 °C @760 [mm Hg]67 °C3.5 mm Hg(lit.)
DecompositionWhen heated to decomp it emits acrid smoke and irritating fumes.
녹는점FP: -12 °C
증기 밀도Relative vapor density (air = 1): 4.55 (vs air)
증기압0.01 mm Hg ( 25 °C)
굴절률n20/D 1.453(lit.)
저장 조건2-8°C
물리적 상태액체
pKa(산도 계수)13.83±0.10(Predicted)
색상투명한
냄새에스테르 같은
용해도녹는
BRN1071583
헨리 상수4.6×101 mol/(m3Pa) at 25℃, Duchowicz et al. (2020)
안정성Unstable - may polymerize in the absence of stabilizer. May be stabilized with, or contain small amounts of, diethylene glycol monomethacrylate, di(ethylene glycol)dimethacrylate, methacrylic acid. Incompatible with strong oxidizing agents, free radical initiators, peroxides, steel. Closed containers may explode if heated due to runaway polymer
화장품 원료 기능네일 스컬핑
InChI1S/C6H10O3/c1-5(2)6(8)9-4-3-7/h7H,1,3-4H2,2H3
InChIKeyWOBHKFSMXKNTIM-UHFFFAOYSA-N
SMILESCC(=C)C(=O)OCCO
LogP(분배 계수)0.42 at 25℃
NIST2-Hydroxyethyl methacrylate(868-77-9)
EPA2-Hydroxyethyl methacrylate (868-77-9)

화학적 성질

colourless liquid

안전 및 규제

GHS 분류WarningH315: Causes skin irritation [Warning Skin corrosion/irritation]P261, P264, P264+P265, P272, P280, P302+P352, P305+P351+P338, P321, P332+P317, P333+P317, P337+P317, P362+P364, and P501 (click each P-code to see the statement)This chemical does not meet GHS hazard criteria for 0.2% (3 of 1898) of reports.H315 (94.3%): Causes skin irritation [Warning Skin corrosion/irritation]
규제 정보Chemical: 2-Propenoic acid, 2-methyl-, 2-hydroxyethyl ester2-Propenoic acid, 2-methyl-, 2-hydroxyethyl ester is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Propenoic acid, 2-methyl-, 2-hydroxyethyl ester are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 16-05-2023 https://echa.europa.eu/registration-dossier/-/registered-dossier/151242-Hydroxyethyl methacrylate: Does not have an individual approval but may be used under an appropriate group standard
기타 안전 정보IMAP assessments - 2-Propenoic acid, 2-methyl-, 2-hydroxyethyl ester: Human health tier II assessment
화재 위험Combustible. Above 97 °C explosive vapour/air mixtures may be formed.
화재 가능성30% GRADE (WITH XYLENE) IS FLAMMABLEMODERATE FIRE RISK.
유해성 요약Allergic contact dermatitis reported in a laboratory technician and in the printing industryA skin and eye irritant[HSDB] Hydrolyzed forming methacrylic acid and ethylene glycolA mild skin and moderate eye irritantPossesses skin sensitizing properties with equivocal results in human patch testing[Reference #2] A skin and severe eye irritantMay cause skin sensitization[Alfa Aesar MSDS]
FDA 요건Homopolymers and copolymers of 2-Hydroxyethyl methacrylate is an indirect food additive for use only as a component of adhesives.
EC 분류Symbol: XiR: 36/38-43S: (2)-26-28Note: D
Chemical DangersThe substance will polymerize due to heating, on contact with peroxides, and under the influence of light. Heating may cause violent combustion or explosion. This produces acrid smoke. The substance may spontaneously polymerize if it is not stabilized.
Hazard Classes and CategoriesSkin Irrit. 2 (94.3%)Eye irritation - category 2ASerious eye damage/eye irritation - Category 2ASerious eye damage/eye irritation - Category 2Skin corrosion/irritation - Category 2
Skin, Eye, and Respiratory IrritationsIrritating to eyes and skin.
소화Use water spray, dry powder, alcohol-resistant foam. In case of fire: keep drums, etc., cool by spraying with water.
응급 조치Fresh air, rest. Refer for medical attention.First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again. Refer for medical attention .First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.Rinse mouth. Do NOT induce vomiting. Give one or two glasses of water to drink. Refer immediately for medical attention.
안전 보관Store only if stabilized. Keep in the dark. Cool. Ventilation along the floor.
보관 조건Temp during storage must be kept low to minimize formation of peroxides and other oxidation products. ... Storage temp below 30 °C are recommended for the polyfunctional methacrylates. ... The methacrylate monomers should not be stored for longer than one year. Shorter storage times are recommended for the aminomethacrylates, ie, three months, and the polyfunctional methacrylates, ie, six months. Many of these cmpd are sensitive to UV light and should, therefore, be stored in the dark. The methacrylic esters may be stored in mild steel, stainless steel, or aluminum. /Methacrylic acid & derivatives/
처리 방법SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
누출 처리Personal protection: chemical protection suit and filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking liquid in covered containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Preventive Measures... Hazard is the generation of considerable exothermic heat in some of the reactions, so that high pressures & temp may develop. This danger ... should be borne in mind when designing plant. Awareness of the dangers and of good engineering design are essential to safety. Employees should be instructed about the necessity of cleansing the skin if it is contaminated by materials which are irritants or skin-absorbed. With careful design, however, and complete enclosure of those processes where toxic chemicals or intermediates occur, dangerous exposures can be avoided. /Acrylic acid & derivatives/SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.
Eye PreventionWear safety spectacles or eye protection in combination with breathing protection.
Fire PreventionNO open flames. Above 97 °C use a closed system and ventilation.
Inhalation RiskNo indication can be given about the rate at which a harmful concentration of this substance in the air is reached.
Skin PreventionProtective gloves. Protective clothing.
Exposure PreventionPREVENT GENERATION OF MISTS!
생태독성 수치LC50 Pimephales promelas (fathead minnows) 0.99 g/l/96 hr (95% confidence limit 0.90-1.1 g/l)age 30 days old, water hardness 45.6 mg/l calcium carbonate, temp 24.9 °C, pH 7.66, dissolved oxygen 7.1 mg/l, alkalinity 44.4 mg/l (CaCO3), Tank vol: 2.0 l, additions: 18 vol/day (flow-through bioassay)
환경 거동TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 43(SRC), determined from a log Kow of 0.47(2) and a regression-derived equation(3), indicates that 2-hydroxyethyl methacrylate is expected to have very high mobility in soil(SRC). Volatilization of 2-hydroxyethyl methacrylate from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 4.6X10-9 atm-cu m/mole(SRC), using a fragment constant estimation method(4). 2-Hydroxyethyl methacrylate is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.126 mm Hg(5). Screening tests indicate that 2-hydroxyethyl methacrylate is readily biodegradableit reached 92-100% of its theoretical BOD in 2 weeks using an activated sludge inoculum(6).AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 43(SRC), determined from a log Kow of 0.47(2) and a regression-derived equation(3), indicates that 2-hydroxyethyl methacrylate is not expected to adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 4.6X10-9 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(5), an estimated BCF of 1.3(SRC), from the log Kow(2), suggests the potential for bioconcentration in aquatic organisms is low. Hydrolysis of 2-hydroxyethyl methacrylate may be a significant process under basic conditions based upon a hydrolytic half-life of 4 hours at pH 11 for the structurally similar butyl acrylate(6)half-lives for butyl acrylate at pH 7, 8, and 9 were 4 years, 150 days, and 15 days(SRC), respectively, based upon a hydrolytic rate constant of 0.053 L/mole-sec(8). Screening tests indicate that 2-hydroxyethyl methacrylate is readily biodegradableit reached 92-100% of its theoretical BOD in 2 weeks using an activated sludge inoculum(7).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2-hydroxyethyl methacrylate, which has a vapor pressure of 0.126 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2-hydroxyethyl methacrylate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be 16 hours(SRC) from its estimated rate constant of 2.4X10-11 cu cm/molecule-sec at 25 °C(3). Because the structurally similar ethyl methacrylate does not absorb light in the environmental spectrum above 290 nm(4), direct photolysis of 2-hydroxyethyl methacrylate is not expected to occur(SRC).
유해 작용Skin Sensitizer - An agent that can induce an allergic reaction in the skin.
독성 요약Based on available data, the CIR Expert Panel concluded that...HEMA is safe as used in nail enhancement products when skin contact is avoided. Products containing these ingredients should be accompanied with directions to avoid skin contact, because of the sensitizing potential of Methacrylates.Safe for use in cosmetics, with qualifications
Signs and SymptomsCough. Sore throat.Redness.Sore throat. Aspiration hazard!
Soil Adsorption/MobilityThe Koc of 2-hydroxyethyl methacrylate is estimated as approximately 43(SRC), using a log Kow of 0.47(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that 2-hydroxyethyl methacrylate is expected to have very high mobility in soil.
Human Toxicity ExcerptsLAB TECHNICIAN DEVELOPED ALLERGIC CONTACT DERMATITIS ASSOC WITH NAUSEA, DIARRHEA, & PERSISTENT PARESTHESIA OF FINGERTIPS. HYDROXYETHYLMETHACRYLATE WAS DEMONSTRATED TO PASS THROUGH VINYL GLOVES.2-Hydroxy-ethyl methacrylate and di- and tetra-ethylene glycol dimethacrylates have produced contact sensitization in workers in the printing industry.
Artificial Pollution Sources2-Hydroxyethyl methacrylate's production and use in acrylic resins, enamels, and as a binder for non-woven fabrics(1) may result in its release to the environment through various waste streams(SRC).
Environmental Biodegradation2-Hydroxyethyl methacrylate, present at 100 mg/l, reached 92-100% of its theoretical BOD in 2 weeks using an activated sludge inoculum and the Japanese MITI test(1).
Environmental BioconcentrationAn estimated BCF of 1.3 was calculated for 2-hydroxyethyl methacrylate(SRC), using a log Kow of 0.47(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low.
Volatilization from Water/SoilThe Henry's Law constant for 2-hydroxyethyl methacrylate is estimated as 4.6X10-9 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that 2-hydroxyethyl methacrylate is expected to be essentially nonvolatile from water surfaces(2) and from moist soil surfaces(SRC). 2-Hydroxyethyl methacrylate is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.126 mm Hg(3).
Non-Human Toxicity ExcerptsTOXICOLOGICALLY, HYDROXYETHYL METHACRYLATE APPEARS ALMOST THREE TIMES AS TOXIC AS THE METHACRYLIC ETHYL ESTER.INTRACORNEAL IMPLANTS OF PLASTIC FOILS MADE WITH HYDROXYETHYLMETHACRYLATE OR HYDROXYETHYLACRYLATE PLUS ETHYLENEGLYCOL DIMETHACRYLATE IN RABBITS PRODUCED EDEMA, VASCULARIZATION, NECROSIS, & ULCERATION & EVEN CHANGES IN THE PLASTICS THEMSELVES. CAUSATIVE AGENT NOT IDENTIFIED.THE TOXICITY OF 6 ACRYLATES AND 6 METHACRYLATES, INCLUDING 2-HYDROXYETHYL METHACRYLATE, WAS DETERMINED IN RATS AND FISH. ALL THE ESTERS WERE LESS TOXIC THAN ACRYLAMIDE AND ACRYLONITRILE. METHACRYLATES WERE APPROXIMATELY 5-FOLD LESS TOXIC THAN ACRYLATES. FOR A GIVEN SERIES, TOXICITY DECREASED WITH INCREASING LENGTH OF THE CARBON CHAIN.METHACRYLIC ACID ADMIN IV INCR RESPIRATORY RATE, DECR HEART RATE, & PRODUCED ELECTROCARDIOGRAM CHANGES IN ANESTHETIZED DOGS. METHACRYLIC ACID, METHYL, N-PROPYL, N-BUTYL, ISOBUTYL, AND HYDROXYETHYL METHACRYLATES PRODUCED A BIPHASIC RESPONSE, AN ABRUPT FALL IN BLOOD PRESSURE FOLLOWED BY A SECONDARY RISE. 2-ETHYLHEXYL, ISODECYL, LAURYL, AND TERT-BUTYLAMINOETHYL METHACRYLATES PRODUCED ONLY A HYPOTENSIVE EFFECT. DIMETHYLAMINOETHYLMETHACRYLATE PRODUCED ONLY A HYPERTENSIVE EFFECT.TWENTY-ONE DIFFERENT ACRYLATE & METHACRYLATE COMPOUNDS, INCLUDING 2-HYDROXYETHYL METHACRYLATE, WERE SCANNED FOR THEIR ABILITY TO INDUCE CONTACT SENSITIVITY, USING 5 DIFFERENT SENSITIZATION PROTOCOLS. CONTACT REACTIONS OF VARYING INTENSITIES WERE PRODUCED TO ALL THE MONO-, DI-, AND TRIACRYLATES TESTED. METHACRYLATES DID NOT SENSITIZE GUINEA PIGS.
수질 위해 등급(WGK)1
TSCA 등재 상태TSCA listed
RTECS 번호OZ4725000
독성LD50 orally in Rabbit: 5050 mg/kg LD50 dermal Rabbit > 3000 mg/kg
관세 코드29161490
위험 문구(R)36/38-43-36/37/38
위험 표시Xi
안전 문구(S)26-36/37-28A-28
기존화학 물질KE-25025
위험 등급Eye Irrit. 2Skin Irrit. 2Skin Sens. 1
저장 분류10 - Combustible liquids
유해 물질 데이터868-77-9(Hazardous Substances Data)

용도

개요

2-Hydroxyethyl methacrylate (HEMA) is a widely used monomer compound employed in the preparation of poly(2-hydroxyethyl methacrylate) (PHEMA) and its derivatives. PHEMA is a favourable biomaterial primarily utilised in the production of hydrogel medical materials. HEMA is a raw material for contact lenses, paints, adhesives, resin modifiers, photosensitive resins, paper processing agents, and similar products.

용도

2-Hydroxyethyl methacrylate is used for preparation of hydrophilic polymers for biomedical devices.

일반 설명

2-Hydroxyethyl methacrylate (HEMA) is biocompatible in nature. Polymeric hydrogel scaffold can be produced by polymerizing HEMA in water.