기본 정보
- CAS
1077-56-1- 표준 SMILES
CCNS(=O)(=O)c1ccccc1C- InChIKey
NATWUQFQFMZVMT-UHFFFAOYSA-N- 분자식
- C9H13NO2S
- 평균 분자량
- 199.27 g/mol
- 단동위원소 질량
- 199.06669983
개요
Toluene ethylsulfonamide is a viscous slightly yellow liquid. (NTP, 1992)
이름 및 식별자
- 우선 이름
- N-Ethyl-o-toluenesulfonamide
- IUPAC
- N-ethyl-2-methylbenzenesulfonamide
- 현지명
- N-에틸-o/p-톨루엔술폰아미드
- 영어명
- N-Ethyl-o/p-toluenesulfonamide
- 분자식
- C9H13NO2S
- 분자량
- 199.27
이름 및 동의어
N-ETHYL-O-TOLUENESULFONAMIDE1077-56-1N-Ethyl-2-methylbenzenesulfonamideN-Ethyltoluene-2-sulphonamideBenzenesulfonamide, N-ethyl-2-methyl-o-Toluenesulfonamide, N-ethyl-O-TOLUENE ETHYL SULFONAMIDEUniplex 108HSDB 5782UNII-6Y8J5WET036Y8J5WET03EINECS 214-073-3
이름 더 보기
N-에틸-o/p-톨루엔술폰아미드NETSAN-Ethyl-o/p-toluenesN-Ethyl-OPTSA,N-E-O/PTSAToluene ethylsulfonamideN-Alkylo/p-ToluenesulfonamideN-Ethyl-o/p-toluenesulfonamideN-Ethyl-3-MethylbenzenesulfonaMideN-Ethyl-2/4-methylbenzenesulfonamideN-Ethyl-o(or p)-toluene sulfonylamideN-Ethyl-o/p-toluenesulfonamide(N-E-O/PTSA)
DTXSID5052416N-ETHYL-O-TOLUENESULFONAMIDE [HSDB]RefChem:163332oToluenesulfonamide, NethylDTXCID1030101Benzenesulfonamide, Nethyl2methyl8047-99-2NATWUQFQFMZVMT-UHFFFAOYSA-N
데이터베이스 식별자
- CAS
물성
구조 계산 물성
- XLogP
- 1.6
- 극성 표면적
- 54.6 Ų
- 수소 결합 공여자 수
- 1
- 수소 결합 수용자 수
- 3
- 회전 가능 결합 수
- 3
- 무거운 원자 수
- 13
- 형식 전하
- 0
- 복잡도
- 243
실험 및 물리화학적 성질
Chemical ClassesNitrogen Compounds -> Sulfonamides
CosmeticsPlasticiser; Film forming
PlasticizersPlasticizer
Density1.203 at 63.9 °F (NTP, 1992) - Denser than water; will sink
Solubilityless than 0.1 mg/mL at 64 °F (NTP, 1992)
Flash Pointgreater than 200 °F (NTP, 1992)
Vapor Pressure4.15 mmHg at 77 °F (NTP, 1992)
Food Contact Substances
FCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR
FCS -> FDA Inventory of Effective Food Contact Substance (FCS) Notifications
Physical Description
Toluene ethylsulfonamide is a viscous slightly yellow liquid. (NTP, 1992)
CBI; Liquid
물리화학적 성질
- 끓는 점
안전 및 규제
안전 정보는 참고용이며, 공급업체의 물질안전보건자료(SDS), 관련 법규 및 전문가 평가를 대체하지 않습니다.
GHS 분류
GHS Classification
This chemical does not meet GHS hazard criteria for 47.4% (55 of 116) of reports.
Warning
H336 (15.5%): May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]
P261, P271, P273, P304+P340, P319, P403+P233, P405, and P501 (click each P-code to see the statement)
Aggregated GHS information provided per 116 reports by companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
This chemical does not meet GHS hazard criteria for 57.1% (32 of 56) of all reports.
유해성 정보
Regulatory Information
Chemical: Benzenesulfonamide, N-ethyl-2(or 4)-methyl-
Benzenesulfonamide, N-ethyl-2-methyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Benzenesulfonamide, N-ethyl-2-methyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
REACH registered substance: N-ethyl-o(or p)-toluenesulphonamide (EC: 232-465-2)
Benzenesulphonamide, N-ethyl-2-methyl-: Does not have an individual approval but may be used under an appropriate group standard
Benzenesulfonamide, N-ethyl-2(or 4)-methyl-: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right.
Fire HazardsThis chemical is probably combustible. (NTP, 1992)
Hazards SummaryAn eye and mild skin irritant; [eChemPortal: ERMA]
Reactive GroupAmides and Imides
Reactivity Profile
TOLUENE ETHYLSULFONAMIDE is an amide. Amides/imides react with azo and diazo compounds to generate toxic gases. Flammable gases are formed by the reaction of organic amides/imides with strong reducing agents. Amides are very weak bases (weaker than water). Imides are less basic yet and in fact react with strong bases to form salts. That is, they can react as acids. Mixing amides with dehydrating agents such as P2O5 or SOCl2 generates the corresponding nitrile. The combustion of these compounds generates mixed oxides of nitrogen (NOx).
화학 및 산업
용도 및 제조
Uses
Used as a plasticizer for polyamides, cellulose acetate, and gasoline-resistant coatings; [HSDB]
PLASTICIZER FOR POLYAMIDES (AS MIXT WITH P-ISOMER)
PLASTICIZER FOR CELLULOSE ACETATE (AS MIXT WITH P-ISOMER)
PLASTICIZER FOR GASOLINE-RESISTANT COATINGS (AS MIXT)
U.S. Exports
(1979) No Data
(1981) No Data
U.S. Imports
(1979) No Data
(1981) No Data
U.S. Production
2023: 400,000 - <550,000 lb
(1977) AT LEAST 4.5X10+8 GRAMS
(1981) No Data
Consumer UsesPlasticizer
Industry UsesPigment
Methods of ManufacturingREACTION OF TOLUENESULFONYL CHLORIDE WITH ETHYLAMINE PRODUCES A MIXT OF O- & P-ISOMERS
Use ClassificationCosmetics -> Plasticiser; Film forming
General Manufacturing Information
Printing and Related Support Activities
Benzenesulfonamide, N-ethyl-2-methyl-: ACTIVE
응용 분야
용도N-Ethyl-o/p-toluenesulfonamide's good plasticizers of polyamide resin and cellulose kind of resin, it has high compatibility for hot melt adhesives, coatings, printing ink.
일반 설명Viscous slightly yellow liquid.
공급사61 곳
관련 반응
1건
화합물 노트
불러오는 중…