Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
2-클로로-6-(트리클로로메틸)피리딘
나이트라파이린 · 2-클로로-6-(트리클로로메틸)피리딘 · 니트라피린 · 2-CHLORO-6-(TRICHLOROMETHYL)PYRIDINE · 2-Chloro-6-trichloromethyl · 2-chloro-6-(trichloromethyl) · N-SERVE · Dowco-163
식별자 및 물리적 특성
| CAS No. | 1929-82-4 |
|---|---|
| 분자식 | C6H3Cl4N |
| 평균 분자량 | 230.9 g/mol |
| 단동위원소 질량 | 228.90196 g/mol |
| SMILES | Clc1cccc(C(Cl)(Cl)Cl)n1 |
| InChIKey | DCUJJWWUNKIJPH-UHFFFAOYSA-N |
| PubChem CID | 16004 |
| ChEMBL | CHEMBL1557091 |
| ChEBI | CHEBI:81935 |
| EC No. | 217-682-2 |
| DTXSID | DTXSID0024216 |
| 현지명 | 2-클로로-6-(트리클로로메틸)피리딘 |
화학 및 물리적 성질
| XLogP | 3.4 |
|---|---|
| 극성 표면적 | 12.9 |
| 수소 결합 공여자 수 | 0 |
| 수소 결합 수용자 수 | 1 |
| 회전 가능 결합 수 | 0 |
| 무거운 원자 수 | 11 |
| 형식 전하 | 0 |
| 복잡도 | 133 |
| LogP(분배 계수) | 3.4 |
| 밀도 | Relative density of the vapour/air-mixture at 20 °C (air = 1): 1.01.8732 (rough estimate) |
| 용해도 | less than 0.1 mg/mL at 64 °F (NTP, 1992)Solubility in water: noneInsoluble10 mg/ml 에탄올에 용해됩니다. |
| 인화점 | 100 °C c.c. |
| 끓는 점 | 277 to 280 °F at 11 mmHg (NTP, 1992)at 1.5kPa: 136 °C277 to 280 °F at 11 mmHg136-138°C |
| 녹는점 | 144.5 to 145.2 °F (NTP, 1992)63 °C145 °F62-63°C |
| 증기압 | 0.0028 mmHg at 73 °F (NTP, 1992)0.0048 [mmHg]Vapor pressure, Pa at 23 °C:0.003 mmHg at 73 °F0.003 [mm Hg] @22.5 °C(73 °F): 0.003 mmHg2.8 x 10-3 mmHg at 20 °C (quoted, Verschueren, 1983) |
| Physical Description | Nitrapyrin appears as colorless crystals or off-white crystalline solid. (NTP, 1992)LiquidColorless or white, crystalline solid with a mild, sweet odor[NIOSH]COLOURLESS-TO-WHITE CRYSTALS WITH CHARACTERISTIC ODOUR.Colorless or white, crystalline solid with a mild, sweet odor. |
| Kovats Retention Index | 1463.6 |
| 굴절률 | 1.6000 (estimate) |
| 저장 조건 | Keep in dark place,Sealed in dry,Room Temperature |
| 물리적 상태 | 가루 |
| pKa(산도 계수) | -3.75±0.10(Predicted) |
| 색상 | 하얀색 |
| 비중 | 1.579 (25℃) |
| 용해도 | 불용성. 18°C에서 <0.01g/100mL |
| Merck | 14,6574 |
| BRN | 1618997 |
| 헨리 상수 | 2.13 x 10-3 atmm3/mol (approximate - calculated from water solubility and vapor pressure) |
| 주요 응용 | 농업환경 |
| InChI | 1S/C6H3Cl4N/c7-5-3-1-2-4(11-5)6(8,9)10/h1-3H |
| InChIKey | DCUJJWWUNKIJPH-UHFFFAOYSA-N |
| SMILES | Clc1cccc(n1)C(Cl)(Cl)Cl |
| LogP(분배 계수) | 3.325-3.41 at 23.5℃ |
| NIST | Pyridine, 2-chloro-6-(trichloromethyl)-(1929-82-4) |
| EPA | Nitrapyrin (1929-82-4) |
화학적 성질
Crystals.
안전 및 규제
| GHS 분류 | WarningH302: Harmful if swallowed [Warning Acute toxicity, oral]H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard]P264, P270, P273, P301+P317, P330, P391, and P501 (click each P-code to see the statement) |
|---|---|
| 규제 정보 | Chemical: Pyridine, 2-chloro-6-(trichloromethyl)-Specific Information Requirement: Obligations to provide information apply. These obligations are:1. A person introducing this chemical must tell us in writing within 28 calendar days if any of the following circumstances have occurred in relation to their introduction (importation or manufacture):a. residues of the chemical are detected in food producing cropsb. products containing the chemical are intended to be used by members of the publicc. products containing the chemical are intended to be used in domestic settingsd. the chemical is imported in solid forme. additional information becomes available that suggests residues of the chemical and/or its metabolites are detected in crops treated with the chemical as microcapsulesf. products containing the chemical are intended to be applied by equipment other than low ground boom.2. A person who introduces this chemical must tell us in writing within 28 calendar days if they become aware of any of the following circumstances, namely, that since the assessment under the Industrial Chemicals (Notification and Assessment) Act 1989:a. the function or use of the chemical has changed, or is likely to change, significantlyb. the amount of the chemical being introduced has increased, or is likely to increase, significantlyc. in the case of a chemical not manufactured, or proposed to be manufactured, in Australia at the time of the assessmentâit has begun to be manufactured in Australiad. the method of manufacture of the chemical in Australia has changed, or is likely to change, in a way that may result in an increased risk of an adverse effect of the chemical on occupational health and safety, public health or the environmente. additional information has become available to the person as to an adverse effect of the chemical on occupational health and safety, public health or the environment.Hazard Traits - CarcinogenicityDevelopmental ToxicityAuthoritative List - Prop 65 |
용도
용도
Fertilizer additive to control nitrification and prevent loss of soil nitrogen.
일반 설명
Colorless crystals or off-white crystalline solid.