Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
디아미노에틸아크릴레이트
2-(다이에틸아미노)에틸아크릴레이트 · 다이에틸아미노에틸아크릴산염 · 디아미노에틸아크릴레이트 · 다이에틸아미노에틸아크릴산염(DIETHYLAMINOETHYLACRYLATE) · 2-(다이에틸아미노)에틸 아크릴레이트 · 2-(디에틸아미노)-에틸아크릴레이트 · DIETHYLAMINOETHYL ACRYLATE · 2-(DIETHYLAMINO)ETHYL ACRYLATE

식별자 및 물리적 특성
| CAS No. | 2426-54-2 |
|---|---|
| 분자식 | C9H17NO2 |
| 평균 분자량 | 171.24 g/mol |
| 단동위원소 질량 | 171.12592879 g/mol |
| SMILES | C=CC(=O)OCCN(CC)CC |
| InChIKey | QHVBLSNVXDSMEB-UHFFFAOYSA-N |
| PubChem CID | 17050 |
| EC No. | 219-378-5 |
| DTXSID | DTXSID4051900 |
| 현지명 | 디아미노에틸아크릴레이트 |
화학 및 물리적 성질
| XLogP | 1.2 |
|---|---|
| 극성 표면적 | 29.5 |
| 수소 결합 공여자 수 | 0 |
| 수소 결합 수용자 수 | 3 |
| 회전 가능 결합 수 | 7 |
| 무거운 원자 수 | 12 |
| 형식 전하 | 0 |
| 복잡도 | 141 |
| 밀도 | 1.4425 @ 20 °C/4 °C0.922 g/mL at 25 °C(lit.) |
| 인화점 | 195 °F (91 °C) (open cup)165 °F |
| 끓는 점 | 70 °C @ 0.67 kPa (5 mm Hg)199 °C(lit.) |
| Decomposition | When heated to decomposition it emits toxic fumes of nitroxides. |
| 녹는점 | < -60 °C-60°C |
| 증기 밀도 | 5.9 (AIR= 1) |
| 증기압 | 0.23 [mmHg]0.77 psi ( 20 °C) |
| 굴절률 | Index of refraction: 0.9251 @ 20 °C/Dn20/D 1.443(lit.) |
| Physical Description | Clear light yellow liquid[MSDSonline] |
| Other Experimental Properties | DECOMPOSES @ BPDECOMPOSED BY WATERReact readily with electrophilic, free-radical, and nucleophilic agents /Acrylic acid & esters/ |
| pKa(산도 계수) | 9.20±0.25(Predicted) |
| 물리적 상태 | Liquid |
| InChI | InChI=1S/C9H17NO2/c1-4-9(11)12-8-7-10(5-2)6-3/h4H,1,5-8H2,2-3H3 |
| InChIKey | QHVBLSNVXDSMEB-UHFFFAOYSA-N |
| SMILES | C(OCCN(CC)CC)(=O)C=C |
| EPA | 2-(Diethylamino)ethyl acrylate (2426-54-2) |
안전 및 규제
| GHS 분류 | DangerH302 (97.6%): Harmful if swallowed [Warning Acute toxicity, oral]H310 (95.2%): Fatal in contact with skin [Danger Acute toxicity, dermal]H314 (97.6%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]H317 (95.2%): May cause an allergic skin reaction [Warning Sensitization, Skin]P260, P261, P262, P264, P270, P272, P280, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P330, P333+P317, P361+P364, P362+P364, P363, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 42 reports by companies from 5 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. |
|---|---|
| 규제 정보 | Chemical: 2-Propenoic acid, 2-(diethylamino)ethyl esterThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.) |
| 유해성 요약 | Severely irritating to skin and eyes[SAX] External application to rabbit eyes scored 9 on a scale of 1-10 (10 being most severe) for degree of injury after 24 hours[HSDB] A corrosive substance that can cause injury to the skin, eyes, and respiratory tractMay cause immediate skin blisteringInhalation may cause chemical pneumonitis and pulmonary edemaMay cause skin sensitizationCan be absorbed through skin[MSDSonline] See ACRYLIC RESINS (MONOMERS). |
| NFPA Hazard Classification | 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury.2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. |
용도
용도
Rodrigues et al. prepared novel temperature and pH-responsive copolymers of [2-(acryloyloxy)ethyl] trimethylammonium chloride (AEtMACl) and 2-(diethylamino)ethyl acrylate (DEAEA) by RAFT polymerization. Such copolymers show a volume phase transition temperature that explains the excellent performance of hydrogels of the same monomers, selected among 600 monomer combinations, to release cultured stem cells using only a mild temperature stimulus[1].