25869-00-5[C-]#N.[C-]#N.[C-]#N.[C-]#N.[C-]#N.[C-]#N.[Fe+2].[Fe+3].[NH4+]ILZWGESBVHGTRX-UHFFFAOYSA-OFerric ammonium ferrocyanide is a solid.
25869-00-5Plastics -> Pigments agents
Plastics -> Polyolefin-I; PUR; Polyolefin-II; PVC (soft); ABS; PVC (rigid); PET; PMMA; PA; PC; (E)PS
Ferric ammonium ferrocyanide is a solid.
Dry Powder
안전 정보는 참고용이며, 공급업체의 물질안전보건자료(SDS), 관련 법규 및 전문가 평가를 대체하지 않습니다.
This chemical does not meet GHS hazard criteria for 65% (204 of 314) of all reports.
H413 (31.2%): May cause long lasting harmful effects to aquatic life [Hazardous to the aquatic environment, long-term hazard]
P273, and P501 (click each P-code to see the statement)
Aggregated GHS information provided per 314 reports by companies from 7 notifications to the ECHA C&L Inventory.
Chemical: Ferrate(4-), hexakis(cyano-C)-, ammonium iron(3+) (1:1:1), (OC-6-11)-
Regulation (EC) No 1831/2003 (amended)
Ferrate(4-), hexakis(cyano-.kappa.C)-, ammonium iron(3+) (1:1:1), (OC-6-11)- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Ferrate(4-), hexakis(cyano-.kappa.C)-, ammonium iron(3+) (1:1:1), (OC-6-11)- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
REACH registered substance: Ammonium iron(3+) hexakis(cyano-C)ferrate(4-) (EC: 247-304-1)
Ferrate(4-), hexakis(cyano-.kappa.C)-, ammonium iron(3+) (1:1:1), (OC-6-11)-: Does not have an individual approval but may be used under an appropriate group standard
FERRIC AMMONIUM FERROCYANIDE is an inorganic cyanide. Inorganic cyanides react slowly with water to evolve gaseous hydrogen cyanide (HCN). Acids cause the rapid evolution of HCN; carbon dioxide from the air is sufficiently acidic to liberate HCN from solutions of cyanides. Inorganic cyanides are incompatible with isocyanates, nitrides, and peroxides. Cyanides have been known to initiate polymerization reactions of epoxides. Cyanides form compounds with metal salts; heat and hydrogen production may accompany these reactions. Some cyanides can detonate when exposed to shock, heat, or friction. In the presence of strong acids or acid fumes may release highly toxic fumes of cyanides.
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Cosmetics -> Cosmetic colorant
Plastics -> Polymer Type -> Polyolefin-I; PUR; Polyolefin-II; PVC (soft); ABS; PVC (rigid); PET; PMMA; PA; PC; (E)PS
Plastics -> Pigments agents
Construction
Ferrate(4-), hexakis(cyano-.kappa.C)-, ammonium iron(3+) (1:1:1), (OC-6-11)-: ACTIVE
용도It is employed as a intermediate for pharmaceuticals. Also used in decorative cosmetics.
일반 설명Solid.
현재 필터 조건에 해당하는 반응 기록이 없습니다.
불러오는 중…