기본 정보
- 표준 SMILES
[F-].[Na+]- InChIKey
PUZPDOWCWNUUKD-UHFFFAOYSA-M- 분자식
- FNa
- 평균 분자량
- 41.9882 g/mol
- 단동위원소 질량
- 41.9881725
개요
Sodium fluoride is a colorless crystalline solid or white powder, or the solid dissolved in a liquid. It is soluble in water. It is noncombustible. It is corrosive to aluminum. It is used as an insecticide. It is also used to fluorinate water supplies, as a wood preservative, in cleaning compounds, manufacture of glass, and for many other uses.
이름 및 식별자
- 우선 이름
- Sodium Fluoride
- IUPAC
- sodium fluoride
- 현지명
- 불화소다
- 영어명
- Sodium fluoride
- 분자식
- FNa
- 분자량
- 41.99
이름 및 동의어
이름 더 보기
데이터베이스 식별자
- CAS
7681-49-4- PubChem CID
- 5235
- DTXSID
DTXSID2020630- ChEMBL
CHEMBL1528- ChEBI
CHEBI:28741- UNII
- 8ZYQ1474W7
- EC Number
- 231-667-8
- Nikkaji
- J44.030B
물성
구조 계산 물성
- 극성 표면적
- 0 Ų
- 수소 결합 공여자 수
- 0
- 수소 결합 수용자 수
- 1
- 회전 가능 결합 수
- 0
- 무거운 원자 수
- 2
- 형식 전하
- 0
- 복잡도
- 2
실험 및 물리화학적 성질
Chemical Classes
Other Classes -> Fluorides, Inorganic
Teratogens
Taste
SALTY
5X10-3 moles/l in water (Taste detection)
Density
2.79 at 68 °F (USCG, 1999) - Denser than water; will sink
2.78
2.8 g/cm³
2.78 @25 °C
2.78
Color/Form
Colorless, cubic or tetragonal crystals
White powder or colorless crystals [Note: Pesticide grade is often dyed blue].
Solubility
10 to 50 mg/mL at 73 °F (NTP, 1992)
4g/100mL
Insoluble in alcohol
Solubility in water 4.0 g/100 ml water at 15 °C. Solubility in water 4.3 g/100 ml water at 25 °C. Solubility in water 5.0 g/100 ml water at 100 °C
Solubility in water, g/100ml at 20 °C: 4.0
4%
Human Drugs
FDA approved drugs -> Active ingredient
FDA approved drugs -> Active ingredient
물리화학적 성질
- 녹는점
- 993 °C · 993 °C (lit.)
- 끓는 점
- 1700 °C · 1700 °C
- 밀도
- 1.02 g/mL · 1.02 g/mL at 20 °C
- 증기압
- 1.4 mm · 1.4 mm Hg ( 0 °C)
- 굴절률
- 1.336 · 1.336
- 인화점
- 1704 °C · 1704°C
- 저장 조건
- 2 · 2-8°C
- 용해도
- 2 O: · H2O: 0.5 M at 20 °C, 투명, 무색
- 물리적 상태
- 가루
- 색상
- 흰색에서 황백색까지
- Specific Gravity
- 2.558 · 2.558
- 수소이온지수(pH)
- 7 · 7.0-10.0 (25℃, 0.5M in H2O)
- 냄새
- 냄새 없는
- 수용성
- 4 g/100mL · 4g/100mL(25℃)
- 비열
- 1.12 J/ · Cp(crystal): 1.12 J/(g·K), at 25℃
- Merck
- 14 · 14,8618
- 안정성
- 안정적인. 물에 의해 가수분해됨. 무기산과 반응하여 독성이 강한 불화수소를 생성합니다. 유리와 호환되지 않습니다.
- 화장품 원료 기능
- 구강 관리안티플라크
- InChI
- 1S/FH.Na/h1H;/q;+1/p-1
- InChIKey
- PUZPDOWCWNUUKD-UHFFFAOYSA-M
- SMILES
- [F-].[Na+]
- NIST
- Sodium fluoride(7681-49-4)
- EPA
- Sodium fluoride (7681-49-4)
화학적 성질
Sodium fluoride is a white powder or colorless crystals. Often used in a solution. Odorless. Pesticide grade is often dyed blue.
안전 및 규제
GHS 분류
GHS Classification
Danger
H301: Toxic if swallowed [Danger Acute toxicity, oral]
P264, P264+P265, P270, P280, P301+P316, P302+P352, P305+P351+P338, P321, P330, P332+P317, P337+P317, P362+P364, P405, and P501 (click each P-code to see the statement)
This chemical does not meet GHS hazard criteria for 1.8% (11 of 623) of reports.
Danger
H301 (97.1%): Toxic if swallowed [Danger Acute toxicity, oral]
유해성 정보
Regulatory Information
Chemical: Sodium fluoride (NaF)
Sodium fluoride (NaF) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Sodium fluoride (NaF) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
Status: Active Update: 26-10-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/14274
Sodium fluoride: Does not have an individual approval but may be used under an appropriate group standard
The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)
DOT Label
Poison
Poison
Fire Hazards
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
· Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
· Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
Not combustible. Gives off irritating or toxic fumes (or gases) in a fire.
Health Hazards
Ingestion may cause vomiting, abdominal pain, diarrhea, convulsions, collapse, thirst, disturbed color vision, acute toxic nephritis. (USCG, 1999)
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
· TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury or death.
· TOXIC and/or CORROSIVE; inhalation, ingestion or skin contact with material may cause severe injury or death.
Hazards Summary
A skin, eye, and respiratory tract irritant; May cause fluorosis; [ICSC] The PEL and IDLH apply to sodium fluoride and other inorganic, solid fluorides. [NIOSH] Abnormal liver enzymes have been reported in cases of sodium fluoride toxicity. [HSDB] See FLUORIDES.
DOT ID and Guide
3415 154
1690 154
1690 154
FDA Requirements
Sodium fluoride is an indirect food additive for use only as a component of adhesives. Limitation: For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride for all sources not to exceed 1 percent by weight of the finished adhesive.
The Approved Drug Products with Therapeutic Equivalence Evaluations List identifies currently marketed over-the-counter drug products, incl sodium fluoride, approved on the basis of safety and effectiveness by FDA under sections 505 of the Federal Food, Drug, and Cosmetic Act.
Reactive Group
Salts, Basic
Salts, Basic
안전 및 보호
Fire Fighting
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
In case of fire in the surroundings, use appropriate extinguishing media. In case of fire: keep drums, etc., cool by spraying with water.
First Aid Measures
Fresh air, rest. Half-upright position. Refer for medical attention.
Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Induce vomiting (ONLY IN CONSCIOUS PERSONS!). Give one or two glasses of water to drink. Refer for medical attention .
Accidental Release Measures
· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.
· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.
· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
General First Aid:
General First Aid:
(General first aid procedures)
Exposure Control and Personal Protection
· Wear positive pressure self-contained breathing apparatus (SCBA).
· Wear positive pressure self-contained breathing apparatus (SCBA).
Biological Exposure Indices (BEI) [ACGIH] - Fluorides in urine = 2 mg/L prior to shift or 3 mg/L at end of shift; (Repeated measurements recommended.)
1.0 [mg/m3], as F, inhalable fraction[German Research Foundation (DFG)]
Fire Fighting Procedures
Extinguish fire using agent suitable for type of surrounding fire (material itself does not burn or burns with difficulty). Use water in flooding quantities as fog; Cool all affected containers with flooding quantities of water; Apply water from as far a distance as possible. /Sodium fluoride solution/
If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use "alcohol" foam, dry chemical or carbon dioxide.
Storage Conditions
Aqueous solutions of sodium fluoride slowly decompose and become alkaline when stored in glass. Therefore, sodium fluoride solutions should be stored in tight, plastic containers, especially if the pH of the solution is less than 7.5. Sodium fluoride solutions and tablets should be stored at a temperature less than 40 °C, preferably between 15-30 °C; freezing of the solutions should be avoided. Sodium fluoride is incompatible with calcium and magnesium salts.
Store in a cool, dry, well-ventilated location. Separate from acids and alkalies.
Sodium fluoride /container/ ... should be colored to help distinguish it from table salt or flour.
Cleanup Methods
Environmental considerations-land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material; /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water. /Sodium fluoride solution/
Environmental considerations-water spill: Neutralize with agricultural lime (CaO), crushed limestone (CaCO3) or sodium bicarbonate (NaHCO3). Adjust pH to neutral (pH= 7). /Sodium fluoride solution/
Shovel into suitable dry container. Control runoff and isolate discharged material for proper disposal.
Nonfire Spill Response
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
Disposal Methods
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.
Group III Containers (both combustible and non-combustible) that previously held organic mercury, lead, cadmium, arsenic, or inorganic pesticides should be triple rinsed, punctured and disposed of in a sanitary landfill. Non-rinsed containers should be encapsulated and buried at a specially designated landfill site. /Organic mercury, lead, cadmium, arsenic, or inorganic pesticides/
A suggested disposal method converts the soluble fluoride ions to insoluble calcium fluoride ... a naturally occurring mineral (fluorspar) which can safely be added to a landfill. The method is as follows: add slowly to a large container of water. Stir in slight excess of Na2CO3 /sodium carbonate/. If fluoride is present add Ca(OH)2 /calcium hydroxide/ also. Let stand 24 hr. Decant or siphon into another container and neutralize with 6 m HCl /hydrochloric acid/ before washing down with large cxcess of water. The sludge may be added to landfill. Recommendable methods: Precipitation & landfill.
Precipitation & landfill: Industry wastes with a high fluoride concn are treated in two phases. By adding CaO /calcium oxide/, the soluble fluorides are precipitated as CaF2 /calcium fluoride/ until the concn has been reduced to 10 mg/l. The compact sludge is disposed of on special waste dumps.
Spillage Disposal
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered containers. Carefully collect remainder. Then store and dispose of according to local regulations.
독성 정보
Interactions
... To examine the efficacy and safety of administration of calcium and magnesium orally and intraperitoneally to treat severe sodium fluoride intoxication ... mice were initially gavaged a lethal dose of sodium fluoride (NaF) or water. Then, mice were treated with water or varying concentrations of calcium chloride (CaCl2) or magnesium sulfate (MgSO4) via intraperitoneal (IP) route or via oral route. Mice were monitored for 24 h, and the time of death was recorded. ... Intraperitoneal injections of large amounts of CaCl2 or MgSO4 were dangerous. All mice gavaged with water and then treated with oral CaCl2 or MgSO4 survived and displayed normal activity during the experiment. The survival rate of mice gavaged with a lethal dose of NaF and then treated with a high dose of oral CaCl2 or MgSO4 was significantly higher than those of using low dose. /The authors concluded that/ oral administration of a high dose of CaCl2 or MgSO4 is a simple, safe, and effective adjunctive method for treating severe oral fluoride poisoning.
Sodium fluoride added with or without sodium selenite in deionized water was administered to male mice for 8 weeks. The influences of fluoride on learning-memory behavior were tested on Y-maze, and the ultrastructure of Gray I synaptic interface in the CA3 area hippocampus was quantitatively analyzed by electron microscopy and computer image processing appliance. The main results showed that the learning capability of mice drinking higher concentration of fluoride presented remarkable deterioration. The thickness of post-synaptic density (PSD) was decreased. The width of the synaptic cleft was remarkably increased. It was found that combined administration of fluoride and proper concentration of selenium could decrease the toxic effect of fluoride. There were synergetic toxicities if the concentration of selenium was too high. The results suggested that selenium might antagonize the neurotoxicity of fluoride on behavior and morphology.
The aim of the study was to evaluate the effect of tamoxifen and natrium fluoride (NaF) on bone metabolism, biochemical properties and blood lipids levels in ovariectomized rats. The study was performed in Wistar rats divided into 5 subgroups: ovariectomized controls, rats treated with NaF 20 mg/kg/24 hr, rats treated with NaF 20 mg/kg/24 hr+tamoxifen 2 mg/kg/24 hr, rats treated with NaF 20 mg/kg/24 hr plus tamoxifen 4 mg/kg/24 hr, and sham-operated controls. In ovariectomized rats the increase of total cholesterol, low-density lipoproteins cholesterol (LDL-cholesterol) as well as the decrease of bone mineral content, bone mineral density and biomechanical properties was observed. The therapy with NaF increased the level of total cholesterol, LDL-cholesterol, triglycerides, bone mineral density, bone mineral content. In this group the decrease of bone strength and stiffness was observed. The administration of tamoxifen reduced the changes in plasma lipid levels, but did not improve the biomechanical properties of bone tissue.
The study was conducted to characterize the action of NaF, which had relaxing property in carbachol precontracted isolated bovine bronchus, on airway responsiveness challenged by acetylcholine receptor agonists in rats and asthmatic humans. Tracheal flow rate and airway resistance were measured in anaesthetized rats. NaF was delivered either before carbachol challenge or together with carbachol. Patients with mild asthma were challenged with methacholine aerosol, and NaF was delivered when FEV1 fell by more than 20%. The results indicated that: (1) in rats NaF significantly inhibited carbachol-induced bronchial constriction when inhaled prior to carbachol challenge as airway resistances in the NaF and NaF+verapamil groups were significantly lower than those in the control group; (2) NaF significantly reversed carbachol or methacholine-induced bronchial constriction in asthmatic patients. In conclusion, NaF, delivered in form of aerosol, reduced bronchial responsiveness to carbachol in rats and had a bronchodilating effect on rat and human airways precontracted by inhalation of acetylcholine analogs.
For more Interactions (Complete) data for SODIUM FLUORIDE (12 total), please visit the HSDB record page.
Ecotoxicity Values
LC50; Species: Chlorella vulgaris (Green algae); Conditions: freshwater; static; Concentration: 7000 uM for 3 day /total/
LC50; Species: Chlorella vulgaris (Green algae); Conditions: freshwater; static; pH 6.0; Concentration: 14000 uM for 15 day /total/
LC50; Species: Chlorella vulgaris (Green algae); Conditions: freshwater; static; pH 6.8; Concentration: 20000 uM for 15 day /total/
EC50; Species: Ceriodaphnia dubia (Water flea); Conditions: freshwater; static; Concentration: 157.9 g/cu m (95% confidence limit: 110 to 225.1 g/cu m) for 24 hr /total/
For more Ecotoxicity Values (Complete) data for SODIUM FLUORIDE (30 total), please visit the HSDB record page.
Exposure Routes
The substance can be absorbed into the body by inhalation of its aerosol and by ingestion.
inhalation, ingestion, skin and/or eye contact
Ecotoxicity Excerpts
/AQUATIC SPECIES/ Safe concentrations (SCs) and EC50s of fluoride ion (F-) for five species of aquatic insect larvae, Chimarra marginata, Hydropsyche bulbifera, H. exocellata, H. lobata, and H. pellucidula, are estimated from short-term toxicity bioassays using the multifactor probit analysis (MPA) software on sublethal data. The sublethal effect is defined as net larva migration. The 24, 48, 72, and 96-h EC50s (mg F-/L) were 178.06, 63.90, 45.41, and 38.28 for C. marginata; 90.06, 36.20, 26.71, and 22.95 for H. bulbifera; 122.64, 42.45, 29.80, and 24.97 for H. exocellata; 238.50, 76.22, 52.12, and 43.09 for H. lobata; and 185.05, 53.74, 35.58, and 28.96 for H. pellucidula. SC values (or 8760-h EC0.01s) were 1.79 for C. marginata, 0.73 for H. bulbifera, 0.56 for H. exocellata, 1.18 for H. lobata, and 0.39 for H. pellucidula. Thus, C. marginata and H. lobata appears to be less sensitive species to fluoride toxicity during short-term and long-term exposures. This difference in sensitivity to fluoride among test species is not dependent upon the body size of net-spinning caddisfly larvae; Pearson correlation analysis between estimated SCs and larva dry weights was not significant (P>0.05). On the other hand, SCs calculated for test species are lower than those proposed for other freshwater and marine animals. It is concluded that the multifactor probit analysis of sublethal acute toxicity data can be a valuable methodology in environmental toxicology to estimate accurate safe concentrations of chemical compounds for aquatic organisms. /Fluoride/
/AQUATIC SPECIES/ Fish exposed to poisonous amounts of sodium fluoride become apathetic, lose weight, have periods of violent movement, and wander aimlessly. Finally, there is a loss of equilibrium accompanied by tetany and death. Mucous secretion increases, accompanied by proliferation of mucous producing cells in the respiratory and integumentary epithelium.
/OTHER TERRESTRIAL SPECIES/ /It was/ demonstrated that untreated earthworms (Lumbricus terrestris) from which gut soil had been removed (depurated) contained only 6% of the amount of fluoride reported in whole worms. Worms kept in soil were exposed to a sodium fluoride concentration of 1000 mg/L for 30 days. The fluoride content of the worms was established either at the end of exposure or following an 8-day starvation period. The fluoride concentration in treated worms with their gut contents washed out was more than 6 times greater than the fluoride concentration of untreated worms. Even after an 8-day starvation period, the concentration in exposed worms was 4 times greater than the concentration in the unexposed worms. The fluoride concentration in the worms was always lower than the concentration in the soil.
Signs and Symptoms
Cough. Sore throat.
Redness.
Redness. Pain.
Abdominal pain. Burning sensation. Convulsions. Drowsiness. Cough. Diarrhoea. Sore throat. Vomiting. Unconsciousness.
irritation eyes, respiratory system; nausea, abdominal pain, diarrhea; salivation, thirst, sweating; stiff spine; dermatitis; calcification of ligaments of ribs, pelvis
Ongoing Test Status
The following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Standard Toxicology & Carcinogenesis Studies", "Developmental Studies", and "Genetic Toxicity Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical. [http://ntp-apps.niehs.nih.gov/ntp_tox/index.cfm?fuseaction=ntpsearch.searchresults&searchterm=7681-49-4]
Natural Pollution Sources
At Lake Magadi Kenya, raw trona is dredged from encrustations on the lake, crushed, washed, and calcined to convert the sodium sesquicarbonate to soda ash. The calcined material is crushed and screened to produce a dense product with ... a characteristically high (1.0%) sodium fluoride content.
Because it is so reactive, fluorine rarely, if ever, occurs naturally in the elementary state, existing instead in the ionic form or as a variety of inorgainc and orgainc fluorides. Rocks, soil, water, air, plants, and animals all contain fluoride in widely-varying concentrations. /Fluoride and fluorine/
Human Toxicity Excerpts
/HUMAN EXPOSURE STUDIES/ Two adults were able to withstand a dose of 250 mg with minimal illness. One volunteer experienced slight nausea and epigastric distress lasting about 5 hr and salivation, which was intense for 15 to 30 min and stopped in half an hour; an itching sensation on his hands and feet lasted for about a week. Another volunteer, who took 250 mg of sodium fluoride on an empty stomach, experienced nausea, which appeared in 2 min and in 20 min incr to a max accompanied by greatly incr salivation and some retching but no vomiting. Two hr after the dose, lunch was eaten but was immediately vomited. Slight nausea continued throughout the following day but disappeared on the second day.
/SIGNS AND SYMPTOMS/ Acute, nonfatal poisoning is characterized by gastroenteritis (sudden nausea and vomiting, abdominal cramps, burning pain, and diarrhea) lasting for 3 to 6 hr and followed by collapse involving stupor and weakness lasting about 36 hr. Tetany may occur as a result of calcium depletion. In fatal poisoning, muscular weakness appears early and is accompanied by a marked fall in blood pressure; tremor may be followed by clonic convulsions; dyspnea may be accompanied by a grayish-blue cyanosis. Death from respiratory and cardiac arrest may occur a few min to 10 hr or more after ingestion but usually in 3 or 4 hr.
/SIGNS AND SYMPTOMS/ In case of poisoning, plasma calcium may be decr and there is generally a disruption of fluid balance as a result of vomiting. Albuminuria is common ... In acute fatal poisoning there is corrosion of the stomach and sometimes other parts of the gastrointestinal tract. Frequently there is edema of the brain and lungs and petechial hemorrhages of the lungs and heart.
/SIGNS AND SYMPTOMS/ severe acute fluoride overdose can cause hypocalcemia and tetany and bone pain, especially in the feet and ankles, of uncertain cause; electrolyte disturbances and cardiac arrhythmias have been reported, progressing to cardiac failure or respiratory arrest in some cases.
For more Human Toxicity Excerpts (Complete) data for SODIUM FLUORIDE (18 total), please visit the HSDB record page.
Artificial Pollution Sources
FROM FACTORIES, PROCESSING FLUORINE CONTAINING ORES, DUSTS MAY CONSIST OF SODIUM FLUORIDE VOLATILIZED .../AND/... THEN CONDENSED BY COOLER SURROUNDING AIR. LEAVES OF PLANTS MAY COLLECT SOME OF THE DUST. EXTENT OF CONTAMINATION WILL DEPEND UPON TOPOGRAPHY OF SURROUNDING TERRAIN & ESPECIALLY DIRECTION OF PREVAILING WIND.
규제 정보
FDA Requirements
Sodium fluoride is an indirect food additive for use only as a component of adhesives. Limitation: For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride for all sources not to exceed 1 percent by weight of the finished adhesive.
The Approved Drug Products with Therapeutic Equivalence Evaluations List identifies currently marketed over-the-counter drug products, incl sodium fluoride, approved on the basis of safety and effectiveness by FDA under sections 505 of the Federal Food, Drug, and Cosmetic Act.
FIFRA Requirements
As the federal pesticide law FIFRA directs, EPA is conducting a comprehensive review of older pesticides to consider their health and environmental effects and make decisions about their future use. Under this pesticide reregistration program, EPA examines health and safety data for pesticide active ingredients initially registered before November 1, 1984, and determines whether they are eligible for reregistration. In addition, all pesticides must meet the new safety standard of the Food Quality Protection Act of 1996. Pesticides for which EPA had not issued Registration Standards prior to the effective date of FIFRA '88 were divided into three lists based upon their potential for human exposure and other factors, with List B containing pesticides of greater concern and List D pesticides of less concern. Sodium fluoride is found on List C. Case No: 3132; Pesticide type: insecticide, fungicide; Case Status: OPP is reviewing data from the pesticide's producers regarding its human health and/or environmental effects, or OPP is determining the pesticide's eligibility for reregistration and developing the RED document.; Active ingredient (AI): sodium fluoride; Data Call-in (DCI) Date(s): 9/30/1992; AI Status: The producers of the pesticide have made commitments to conduct the studies and pay the fees required for reregistration, and are meeting those commitments in a timely manner..
CERCLA Reportable Quantities
Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 1000 lb or 454 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).
Clean Water Act Requirements
Sodium fluoride is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.
State Drinking Water Standards
(CA) CALIFORNIA 2,000 ug/L /Fluoride/
(DE) DELAWARE 2,000 ug/L /Fluoride ion/
(PA) PENNSYLVANIA 2,000 ug/L /Fluoride ion/
State Drinking Water Guidelines
(AZ) ARIZONA 4,000 ug/L /Fluoride ion/
(ME) MAINE 1,680 ug/L /Fluoride ion/
안전 데이터
- OEB
- B
- OEL
- TWA: 2.5 mg/m3 [*Note: The REL also applies to other inorganic, solid fluorides (as F).]
- wgk
- 1
- tsca
- TSCA listed
- rtecs
- WB0350000
- ridadr
- UN 3415 6.1/PG III (SODIUM FLUORIDE SOLUTION)
- 독성
- LD50 orally in rats: 0.18 g/kg (Smyth)
- HS 번호
- 2826 19 10
- risk_code
- 25-32-36/38-22
- hazard_code
- T,Xn
- safety_code
- 23-24/25-45-36-22
- 포장분류
- III
- 위험 등급
- 6.1
- 기존화학 물질
- KE-31540
- F 고인화성물질
- 10
- 위험 참고 사항
- Toxic/Hygroscopic
- Hazard Classifications
- Acute Tox. 3 OralEye Irrit. 2Skin Irrit. 2
- 스토리지 클래스
- 6.1D - Non-combustible acute toxic Cat.3toxic hazardous materials or hazardous materials causing chronic effects
- 유해 물질 데이터
- 7681-49-4(Hazardous Substances Data)
- 함량 및 규제정보
- 물질구분: 유독물질; 혼합물(제품)함량정보: 플루오르화 나트륨 및 이를 25% 이상 함유한 혼합물
- 유해화학물질 필터링
- 97-1-381
화학 및 산업
약리 정보
ATC Code
A - Alimentary tract and metabolism
A - Alimentary tract and metabolism
QA - Alimentary tract and metabolism
QA - Alimentary tract and metabolism
Pharmacodynamics
Sodium fluoride protects the teeth from acid demineralization while preventing tooth decay by bacteria while strengthening tooth enamel. It is important to note that excess fluoride exposure during tooth mineralization, especially in children 1-3 years old, may cause fluorosis. It is a condition manifested by white lines, pitting, or discoloration of teeth resulting from changes in tooth enamel. The risk of fluorosis can be decreased by the use of a rice-size amount of fluoridated toothpaste in children younger than 3 years old. It is recommended that no more than a pea-sized quantity of fluoridated toothpaste should be used for children from 3 to 6 years old. The American Dentistry Association (ADA) recommends that children should be closely supervised during toothpaste use to prevent excess fluoride ingestion.
Mechanism of Action
The prevention of dental caries by topical fluoride is achieved by various mechanisms. Sodium fluoride kills bacteria that cause caries, such a Streptococcus mutans and lactobacilli by interfering with their metabolic activities that result in the formation of lactic acid. Fluoride ions cause the inhibition of glycolytic and other enzymes involved in bacterial metabolism. It changes the permeability of cell membranes, lowering the pH in the cytoplasm of the cell, leading to a decrease in acidity, which is normally implicated in tooth decay. When administered at low topical doses, fluoride in both saliva and plaque and saliva prevent the demineralization of healthy tooth enamel while remineralizing teeth that have previously been demineralized. Sodium fluoride is absorbed by the surface of hydroxyapatite crystals on the teeth, which are necessary for mineralization. This renders the teeth more resistant to demineralization by changing the apatite crystal solubility. Sodium fluoride inhibits the demineralization of teeth in a pH-related manner. When used in high doses, in formulations such as the fluoride varnishes or gels, sodium fluoride forms a layer on the surface of tooth enamel. When the pH of the mouth is reduced due to acid production by bacteria such as S.mutans, fluoride is released, interfering with bacterial metabolism, and then acts to remineralize the teeth.
Fluoride ion becomes incorporated into and stabilizes the apatite crystal of bone and teeth. Fluoride acts primarily to promote remineralization of decalcified enamel and may interfere with growth and development of dental plaque bacteria. Deposition of fluoride ion in the enamel surface of teeth increases resistance to acid and to development of caries.
In fluorosis uncomplicated by systemic illness, fluoride ion appears to be deposited in place of hydroxyl ion in the hydroxyapatite of bone. There is little or no change in the calcium ... or phosphate ... content of the bone. A part of the fluorine deposited in bone is readily excreted after fluoride feeding is stopped, but another part is more firmly held. /Fluorosis/
Fluoride is very reactive and capable of inhibiting a number of enzymes, incl preglycolytic enzymes, phosphatases, and cholinesterase. The result is inhibition of cellular glucose phosphorylation (hence subsequent glycolysis) and respiration and incr sensitivity of cholinergic mechanisms to acethycholinesterase.
Inhibition of one or more enzymes controlling cellular glycolysis (& perhaps resp) may result in a critical lesion. ... binding or precipitation of calcium as calcium fluoride ... suggested as mechanism underlying many diverse signs & symptoms in fluoride poisoning, particularly if death is delayed. ... at least in some species fluoride interferes with both contractile power of heart and the mechanism of beat in a way that cannot be ascribed to hypocalcemia. /Fluoride/
Biological Half-Life
The terminal plasma elimination half-life following the ingestion of fluoridated drinking water generally ranges from 3 to 10 hours. The half-life of sodium fluoride in the bones is 20 years.
Following oral admin of sodium fluoride to rabbits, the fluoride concn of plasma rose rapidly from a range of 0.01 to 0.07 ppm to a maximal level usually within 1 hr and then usually declined with a half-life of 4 or 5 hr.
Metabolism/Metabolites
Several factors can affect the metabolism of sodium fluoride. These include disorders of acid-base balance, circadian rhythm, hematocrit level, high or low altitude, the level physical activity, hormonal status, renal function, genetic predispositions in addition to the diet.
FDA Pharmacological Classification
SODIUM FLUORIDE
Vitamin D [CS]; Vitamin A [CS]; Vitamin B 6 [Chemical/Ingredient]; Vitamin D [EPC]; Vitamin A [EPC]; Vitamin B6 Analog [EPC]; Vitamin C [EPC]; Vitamin B 12 [CS]; Analogs/Derivatives [Chemical/Ingredient]; Ascorbic Acid [CS]; Vitamin B12 [EPC]
Absorption, Distribution and Excretion
Sodium fluoride is 90% absorbed from the gastrointestinal tract, with 77% of absorption in the proximal intestine and about 25% in the stomach. The rate of absorption may vary according to gastric pH. Cmax is reached 20-60 minutes after ingestion. Cmax was estimated to be 848 ± 116 ng/mL after a 20mg sodium fluoride solution was ingested, with a Tmax of 0.46 ± 0.17 hours. The bioavailability of sodium fluoride tablets administered in the fasted state during one pharmacokinetic study approached 100%. Another resource reports a sodium fluoride AUC of 1.14 ± 0.12 μg × h/mL after the ingestion of fluoridated water.
Sodium fluoride is rapidly excreted, mainly in the urine. About 90% of fluoride is filtered by the glomerulus and reabsorbed by the renal tubules. About 10% is excreted in the feces.
Fluoride distributes to the saliva, bones, and teeth, and is also found in lesser quantities in the breastmilk and sweat. After the ingestion of sodium fluoridated drinking water, the fluoride ions are found to distribute to the plasma and blood cells. Plasma levels of fluoride concentrations are twice as the concentrations found in blood cells. Adults have been found to retain 36% of ingested fluoride and children have been found to retain about 50% of a dose. Most of the retained fluoride is localized to bone and teeth and 1% accumulates in soft tissues. Fluoride crosses the placenta and the blood-brain barrier. The central nervous system concentrations of sodium fluoride are estimated to reach 20% the plasma concentrations. Studies conducted in communities with high levels of fluoride in water did not show any increase in birth defects. The placenta is able to regulate the accumulation of excess fluoride, possibly protecting the fetus from high levels of fluoride. Despite this, excessively high exposure to fluoride in utero may lead to skeletal fluorosis.
Sodium fluoride is rapidly cleared by the kidneys and depends on various factors, including glomerular filtration rate, urine flow, and urine pH. According to one clinical study evaluating the pharmacokinetics of oral sodium fluoride tablets in healthy young adults, the renal clearance was determined to be 77.4 ± 11.2mL/min for acidic urine and 78.4 ± 6.9mL/min for alkaline urine. Another reference estimates the renal clearance of fluoride ions from sodium fluoridated water at 35–45 mL/min.
During the growth phase of the skeleton, a relatively high portion of an ingested fluoride dose will be deposited in the skeleton. In infants and children with skeletal growth or individuals not consuming fluoridated drinking-water, up to 75% of the daily amount of fluoride that is absorbed may be incorporated into skeletal tissue. When a fluoride dose (e.g., a fluoride tablet or an infant formula diluted with fluoridated drinking-water) is given to infants, the retention will be strongly correlated with the absorbed fluoride dose per kilogram body weight: the higher the fluoride dose, the higher the fluoride retention. Retention of fluoride following intake of a fluoride supplement of 0.25 mg given to infants was shown to be as high as 80-90%. In a study with adults (aged 23-27 years) in which fluoride was given as a single intravenous injection, about 60% of the injected dose (3 mg fluoride as sodium fluoride) was retained.
Experimental studies performed in vivo with rats and in vitro with isolated segments of dog jejunum have indicated that fluoride (as sodium fluoride) is rapidly absorbed from the stomach and intestinal tract in animals. The rate at which fluoride is absorbed from the stomach is inversely related to the pH of the stomach contents
용도 및 제조
Uses
Used for fluoridation of drinking water and dental preparations to prevent caries; Used in electroplating, steel production, and glass frosting; [AHLS, p. 437]
Steel Producing [Category: Industry]
For sodium fluoride (USEPA/OPP Pesticide Code: 75202) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./
IN ELECTROPLATING; IN HEAT TREATING SALT COMPOSITIONS; FOR DISINFECTING FERMENTATION APPARATUS IN BREWERIES AND DISTILLERIES; MFR COATED PAPER; FROSTING GLASS; IN DENTAL LAB; IN REMOVAL OF HYDROGEN FLUORIDE FROM EXHAUST GASES TO REDUCE AIR POLLUTION
Fungicide, rodenticide, glass manufacture
Fluoridation agent in drinking water; a flux in the manufacture of rimmed steel, aluminum, and magnesium; a fungicide; a glass frosting agent; a component of glues and adhesives; an agent in ore flotation; a stainless steel pickling agent; a toothpaste ingredient; a component of vitreous enamels; and a component of wood preservatives.
Impurities
... Sodium and aluminum fluosilicates
Sulfates & iron
U.S. Production
2023: 4,722,187 lb
(1977) AT LEAST 4.60X10+8 G
(1986) 5.44X10+9 g /estimate/
Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#3558]
In 2004, participating countries declared 298.6 metric tons of potassium fluoride and reported that no metric tons of this category 2 unscheduled chemical were destroyed.
Methods of Manufacturing
Prepared by fusing cryolite with sodium hydroxide
Normally manufactured by the reaction of hydrofluoric acid with soda ash (sodium carbonate) or caustic soda (sodium hydroxide), with control of pH essential and proper agitation necessary to obtain the desired crystal size.
Sodium fluoride ... is prepared by neutralizing aqueous hydrogen fluoride with sodium bicarbonate ...
Formulations/Preparations
Commercial grade (purity 93-99%) is used to prepare baits
Technical grades are 90% and 95% NaF, light (37 cu in/lb) and dense (23 cu in/lb), and 98%
Sodium fluoride solution contains not less than 95% and not more than 105.0% of the labelled amount of sodium fluoride, USP XXI
The purity of the commercial material is about 98%
For more Formulations/Preparations (Complete) data for SODIUM FLUORIDE (8 total), please visit the HSDB record page.
General Manufacturing Information
Other (requires additional information)
Sodium fluoride (NaF): ACTIVE
Sodium fluoride is an unscheduled precursor to Perren-Kinnear complex.
NOT APPROVED FOR /INSECTICIDAL/ USE IN BARNS, GRAIN BINS, POULTRY HOUSES.
Sodium fluoride sold as household insecticide must be tinted Nile Blue.
Prepared ... by adding equiv amt of sodium hydroxide or sodium carbonate to 40% hydrogen fluoride (precipitation is instantaneous and crystal size depends on pH, but too much hydrogen fluoride yields sodium bifluoride, NaHF2): Muller, Chem-Ztg 52, 5 (1928) ...
응용 분야
개요Sodium fluoride, NaF, is a binary salt that is a clear, lustrous crystal or white powder. The insecticide grade is frequently dyed blue. It is soluble in water and has a specific gravity of 2.558, which is heavier than water. Sodium fluoride is highly toxic by ingestion and inhalation, and is also strongly irritating to tissue. The TLV is 2.5 mg/m3 of air. The four-digit UN identification number is 1690. The primary uses are fluoridation of municipal water at 1 ppm, as an insecticide, rodenticide, and fungicide, and in toothpastes and disinfectants.
일반 설명Sodium fluoride is a colorless crystalline solid or white powder, or the solid dissolved in a liquid. Sodium fluoride is formed by the reaction of sodium carbonate and hydrofluoric acid. Sodium fluoride is soluble in water. Sodium fluoride is noncombustible. Sodium fluoride is corrosive to aluminum. Sodium fluoride is used as an insecticide. Sodium fluoride is also used to fluorinate water supplies, as a wood preservative, in cleaning compounds, manufacture of glass, and for many other uses.
제조 방법
Sodium fluoride is prepared by adding sodium hydroxide or sodium carbonate to a 40% solution of hydrofluoric acid. In excess hydrofluoric acid, sodium bifluoride, NaHF2 , is formed. NaF also is made by fusion of cryolite with caustic soda. Technical grade products are usually sold at 90 to 95% purity.
생산 방법Long Yang and colleagues report a highly effective mechanochemical process to recover fluorine from PFAS as NaF, consists of ball milling PFAS with commercially available sodium silicate[1].
상·하류 제품 정보
상류 원료
하류 제품
공급사50 곳
추가 설명
순도시험(1) 유리산 및 유리알칼리 : 이 품목 2.0g을 달아 백금접시에 취하여 물 40mL를 넣고 녹인 다음 질산칼륨포화용액 10mL를 가하여 0℃로 식히고 페놀프탈레인시액 3방울을 가하여 다음의 시험을 행한다. ① 액이 무색이면, 0.1N 수산화나트륨용액 2.0mL를 가할 때, 엷은 홍색을 나타내어야 한다. ② 액이 엷은 홍색이면, 그 색은 0.1N 황산 0.5mL를 가할 때, 없어져야 한다. (2) 불화규산염 : 순도시험 (1)의 시험용액을 끓을 때까지 가열하여 뜨거울 때 0.1N 수산화나트륨액으로 엷은 홍색이 될 때까지 적정할 때, 그 소비량은 1.5mL 이하이어야 한다. (3) 염화물 : 이 품목 0.3g을 물 20mL에 녹인 다음 붕산 0.2g 및 질산 1mL를 넣은 것을 시험용액으로 하여 염화물시험법에 따라 시험할 때, 그 양은 0.001N 염산 1mL에 대응하는 양 이하이어야 한다. (4) 납 :「메타인산나트륨」의 순도시험 (2)에 따라 시험한다(2.0ppm 이하).
확인시험(1) 이 품목은 물에는 녹으나, 에탄올에는 거의 녹지 않는다. (2) 이 품목 1g을 백금도가니에 넣고 황산 15mL를 가하여 유리판으로 덮어 수욕상에서 1시간 가열한 다음 유리판을 물로 씻어 말릴 때 그 표면이 부식되어 있다. (3) 이 품목의 수용액(1 → 25)은 확인시험법 중 나트륨염의 반응을 나타낸다.
정량법이 품목 0.08g을 정밀히 달아 무수초산·빙초산혼합액(1 : 4) 25mL에 녹이고 식힌 다음 0.1N 과염소산용액으로 적정한다(지시약 : 크리스탈바이올렛·빙초산시액 1mL). 종말점은 액이 녹색으로 변하는 점이다. 따로 같은 방법으로 공시험을 한다.
정의ChEBI: Sodium fluoride is a metal fluoride salt with a Na(+) counterion. It has a role as a mutagen.
관련 반응
연결된 노트
불러오는 중…