Iron oxide, spent
1309-37-1Cn1cc(C2=C(c3cccc(N)c3)C(=O)NC2=O)c2ccccc21RGTAEYDIDMGJLX-UHFFFAOYSA-NProduct from the iron-oxide process for the removal of sulfides from gases. In this process gases are passed over a mixture of iron(III) oxide and wood shavings. Liable to spontaneous heating. This heat may cause ignition. Easily ignited by sparks or heat from external sources. Used for precipitating copper or lead from solutions of their salts and in electric furnace steel operations.
Product from the iron-oxide process for the removal of sulfides from gases. In this process gases are passed over a mixture of iron(III) oxide and wood shavings. Liable to spontaneous heating. This heat may cause ignition. Easily ignited by sparks or heat from external sources. Used for precipitating copper or lead from solutions of their salts and in electric furnace steel operations.
안전 정보는 참고용이며, 공급업체의 물질안전보건자료(SDS), 관련 법규 및 전문가 평가를 대체하지 않습니다.
Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]:
· Flammable/combustible material.
· Flammable/combustible material.
Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]:
· Fire will produce irritating, corrosive and/or toxic gases.
· Fire will produce irritating, corrosive and/or toxic gases.
1376 135
1376 135
· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.
개요Iron oxides are produced synthetically and consist essentially of anhydrous and/or hydrated iron oxides. The range of hues includesyellows, reds, browns and blacks. Food quality iron oxides are primarily distinguished from technical grades by the comparatively low levels of contamination by other metals. This is achieved by the selection and control of the source of iron and/or by the extent of chemical purification during the manufacturing process. Iron oxides have been used to color confectionery, fillings and decorations for pastry products, cheese products, fish paste, pet foods, cosmetics and pharmaceutical products.
출처Iron(III) oxide occurs in nature as the mineral hematite. It is the principal ore of iron from which the metal and its alloys are produced. Also, this oxide occurs in the mineral, limonite, 2Fe2O33H2O. An important application of this compound involves producing red, orange, and yellow pigments. Other applications are in coatings for metals, steel and rubber; in ceramics; and as a catalyst for oxidation reactions.
용도Ferric Oxide is a nutrient and dietary supplement that is a source of iron.
Iron(III) oxide is prepared as a reddish-brown hydrated precipitate by treating an aqueous solution of an iron(III) salt with caustic soda: 2FeCl3 + 6NaOH → Fe2O33H2O + 6NaCl It also is obtained by thermal decomposition of iron(II) sulfate or the brown oxide hydroxide: 2FeSO4 → Fe2O3 + SO2 + SO3 2FeO(OH) → Fe2O3 + H2O The oxide is prepared in industrial scale by first precipitating iron(II) hydroxide Fe(OH)2 by treating aqueous solutions of iron(II) sulfate and caustic soda. The Fe(OH)2 is then oxidized to iron(III) hydroxide by aeration. The latter is dehydrated by heating: Fe2+ (aq) + OHˉ (aq) → Fe(OH)2(s) → 2Fe(OH)3 → Fe2O3 + 3H2O It also is produced by ignition of iron(III) oxalate and iron carbonyls: 2Fe2(C2O4)3 +3O2 → 2Fe2O3 + 12CO.
1309-37-1CHEMBL54547Hematite is a noncombustible, black to black red or brick-red mineral (iron ore) composed mainly of ferric oxide, Fe2O3. Ferric oxide
· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.
· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]:
General First Aid:
General First Aid:
· Wear positive pressure self-contained breathing apparatus (SCBA).
· Wear positive pressure self-contained breathing apparatus (SCBA).
Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]:
Immediate precautionary measure
Immediate precautionary measure
· DO NOT USE WATER, CO2 OR FOAM ON MATERIAL ITSELF.
· DO NOT USE WATER, CO2 OR FOAM ON MATERIAL ITSELF.
순도시험(1) 물가용물 : 이 품목 5g에 물 200mL를 가하여 5분간 끓이고 식힌 다음 물을 가하여 250mL로 하고 여과하여 처음의 여액 약 50mL를 버리고 다음의 여액 100mL를 취하여 수욕상에서 증발건고한 다음 잔류물을 105~110℃에서 2시간 건조할 때, 그 양은 15mg 이하이어야 한다. (2) 비소 : 이 품목을 비소시험법에 따라 시험할 때, 그 양은 2.0ppm 이하이어야 한다. (3) 납 : 이 품목 0.2g을 달아 50mL 플라스크에 넣고 9N 염산 10mL, 물 10mL 가열하여 용해한 다음 냉각한 후, 아스코브산-요오드화나트륨용액 20mL 및 트리옥틸포스핀옥시드용액 5mL를 넣고 30초 동안 흔들어 섞고 방치하여 층을 분리한다. 다시 물을 가하여 유기층을 플라스크의 목부분에 오도록 하고 흔들어 섞은 다음 정치하여 층을 분리한 후 유기용매 층을 시험용액으로 한다. 따로 납표준용액 10mL를 취하여 정확히 100mL로 하고 이액 2mL를 정확히 취하여 50mL 플라스크에 넣고 시험용액과 동일한 방법으로 조작하여 대조액으로 한다. 시험용액 및 대조액을 원자흡광광도법 또는 유도결합플라즈마발광광도법에 따라 시험할 때, 그 양은 10.0ppm 이하이어야 한다. 아스코브산-요오드화나트륨용액 : 아스코브산 10g 및 요오드화나트륨 19.3g을 물에 녹여 100mL로 한다. 트리옥틸포스핀옥시드용액 : 트리옥틸포스핀옥시드 5g을 메틸이소부틸케톤에 녹여 100mL로 한다. (4) 카드뮴 : 순도시험 (2)의 시험용액을 원자흡광광도법 또는 유도결합플라즈마발광광도법에 따라 시험할 때, 그 양은 1.0ppm 이하이어야 한다. (5) 수은 : 이 품목을 수은시험법에 따라 시험할 때, 그 양은 1.0ppm 이하이어야 한다.
확인시험이 품목 1g에 염산(1→2) 3mL를 가하여 가열하여 녹인 액은 확인시험법 중 제이철염의 반응을 나타낸다.
정량법이 품목 약 1g을 정밀히 달아 염산 30mL를 가하고 불용물이 거의 백색으로 될 때까지 가열한 다음 물을 가하여 약 50mL로 하여 여과하고 물 약 50mL로 씻는다. 그 씻은 액을 여액에 합치고 다시 물을 가하여 250mL로 하고 그 중 25mL를 취하여 약 10mL로 될 때까지 증발농축한 다음 가열하면서 무색으로 될 때까지 5% 염화제일주석용액을 가하고 다시 5% 염화제일주석용액 1~2방울을 가하여 급히 식힌다. 이에 염화제이수은포화용액 10mL를 일시에 가하고 황산망간시액 25~30mL 및 물 약 100mL를 가하여 0.1N 과망간산칼륨용액으로 적정한다. 따로 같은 방법으로 공시험을 한다.0.1N 과망간산칼륨용액 1mL = 7.985mg Fe2O3
정의A high-grade red pigment used as a polishing agent for glass, jewelry, etc. (2) A cosmetic prepared from dried flowers of the saf- flower.