Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
트리메틸올에탄
트라이메틸올에테인 · 트리메틸올에탄 · 1,1,1-트리스(하이드록시메틸)에테인 · 1,3-프로페인다이올, 2-(하이드록시메틸)-2-메틸- · 2-(하이드록시메틸)-2-메틸-1,3-프로페인다이올 · 2,2-다이(하이드록시메틸)프로판올 · 2,2-비스(하이드록시메틸)-1-프로판올 · 2-메틸-2-하이드록시메틸-1, 3-프로페인다이올
식별자 및 물리적 특성
| CAS No. | 77-85-0 |
|---|---|
| 분자식 | C5H12O3 |
| 평균 분자량 | 120.15 g/mol |
| 단동위원소 질량 | 120.07864424 g/mol |
| SMILES | CC(CO)(CO)CO |
| InChIKey | QXJQHYBHAIHNGG-UHFFFAOYSA-N |
| PubChem CID | 6502 |
| EC No. | 201-063-9 |
| DTXSID | DTXSID2026444 |
| 현지명 | 트리메틸올에탄 |
화학 및 물리적 성질
| XLogP | -1.2 |
|---|---|
| 극성 표면적 | 60.7 |
| 수소 결합 공여자 수 | 3 |
| 수소 결합 수용자 수 | 3 |
| 회전 가능 결합 수 | 3 |
| 무거운 원자 수 | 8 |
| 형식 전하 | 0 |
| 복잡도 | 50.4 |
| Polymers | Other Classes -> Alcohols and Polyols, Other |
| SpringerMaterials Properties | Density |
| 밀도 | 1.210 g/cu cm at 20 °C1.0456 (rough estimate) |
| Color/Form | White powder or needles from alcoholColorless crystals |
| 용해도 | Miscible in water and ethanolinsoluble in diethyl ether and benzenevery soluble in acetic acidSoluble in water and ethanolIn water, 140 g per 100 g at 25 °C |
| 끓는 점 | 283 °CBP: 137 °C at 15 mm Hg137°C 15mm |
| 녹는점 | 204 °C193-195 °C(lit.) |
| Food Contact Substances | FCS -> FDA Cumulative Estimated Daily Intake (CEDI)FCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR |
| Physical Description | Dry PowderColorless or white solid[HSDB] |
| Other Experimental Properties | Hygroscopic |
| 굴절률 | 1.4056 (estimate) |
| 인화점 | 160°C |
| 저장 조건 | Inert atmosphere,Room Temperature |
| pKa(산도 계수) | 14.03±0.10(Predicted) |
| 물리적 상태 | 결정질 분말, 결정 및/또는 덩어리 |
| 색상 | 하얀색 |
| 용해도 | 녹는 |
| BRN | 1304452 |
| 헨리 상수 | 9.0×102 mol/(m3Pa) at 25℃, HSDB (2015) |
| InChI | 1S/C5H12O3/c1-5(2-6,3-7)4-8/h6-8H,2-4H2,1H3 |
| InChIKey | QXJQHYBHAIHNGG-UHFFFAOYSA-N |
| SMILES | CC(CO)(CO)CO |
| NIST | 1,3-Propanediol, 2-(hydroxymethyl)-2-methyl-(77-85-0) |
| EPA | 1,3-Propanediol, 2-(hydroxymethyl)-2-methyl- (77-85-0) |
화학적 성질
white crystalline powder, crystals and/or chunks
안전 및 규제
| GHS 분류 | This chemical does not meet GHS hazard criteria for 90.6% (145 of 160) of all reports.Not ClassifiedAggregated GHS information provided per 160 reports by companies from 5 notifications to the ECHA C&L Inventory. |
|---|---|
| 규제 정보 | Chemical: 1,3-Propanediol, 2-(hydroxymethyl)-2-methyl-1,3-Propanediol, 2-(hydroxymethyl)-2-methyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 1,3-Propanediol, 2-(hydroxymethyl)-2-methyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 24-09-2019 https://echa.europa.eu/registration-dossier/-/registered-dossier/223811,3-Propanediol, 2-(hydroxymethyl)-2-methyl-: Does not have an individual approval but may be used under an appropriate group standard |
| 화재 가능성 | Combustible |
| 유해성 요약 | An irritant[MSDSonline] |
| Hazard Classes and Categories | Not Classified |
| 처리 방법 | SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air qualitypotential migration in soil or watereffects on animal, aquatic, and plant lifeand conformance with environmental and public health regulations. |
| 환경 거동 | TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of less than 1(SRC), determined from a structure estimation method(2), indicates that 1,1,1-tris(hydroxymethyl)ethane is expected to have very high mobility in soil(SRC). Volatilization of 1,1,1-tris(hydroxymethyl)ethane from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.1X10-8 atm-cu m/mole(SRC), using a fragment constant estimation method(3). 1,1,1-Tris(hydroxymethyl)ethane is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 1.7X10-6 mm Hg(SRC), determined from a fragment constant method(4). 1,1,1-Tris(hydroxymethyl)ethane, present at 100 mg/L, reached 4 percent of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(5), suggesting that biodegradation in soil is not an important environmental fate process(SRC).AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of less than 1(SRC), determined from a structure estimation method(2), indicates that 1,1,1-tris(hydroxymethyl)ethane is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 1.1X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). 1,1,1-Tris(hydroxymethyl)ethane is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). According to a classification scheme(5), an estimated BCF of 3.2(SRC), from an estimated log Kow of -0.30(6)and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low. 1,1,1-Tris(hydroxymethyl)ethane, present at 100 mg/L, reached 4 percent of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(8), suggesting that biodegradation in water is not an important environmental fate process(SRC).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 1,1,1-tris(hydroxymethyl)ethane, which has an estimated vapor pressure of 1.7X10-6 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase 1,1,1-tris(hydroxymethyl)ethane is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be 30 hours(SRC), calculated from its rate constant of 1.3X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase 1,1,1-tris(hydroxymethyl)ethane may be removed from the air by wet or dry deposition(SRC). 1,1,1-Tris(hydroxymethyl)ethane does not contain chromophores that absorb at wavelengths >290 nm(4) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). |
| Soil Adsorption/Mobility | Using a structure estimation method based on molecular connectivity indices(1), the Koc of 1,1,1-tris(hydroxymethyl)ethane can be estimated to be less than 1(SRC). According to a classification scheme(2), this estimated Koc value suggests that 1,1,1-tris(hydroxymethyl)ethane is expected to have very high mobility in soil. |
| Artificial Pollution Sources | 1,1,1-Tris(hydroxymethyl)ethane's production and use in the manufacture of varnishes, alkyd and polyester resins, as a conditioning agent and synthetic drying oils(1) may result in its release to the environment through various waste streams(SRC). |
| Environmental Biodegradation | AEROBIC: 1,1,1-Tris(hydroxymethyl)ethane, present at 100 mg/L, reached 4 percent of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(1). In a study using gas chromatography to monitor substrate disappearance, 1,1,1-tris(hydroxymethyl)ethane, at an initial concentration of 50 ppm, did not biodegrade under aerobic conditions(2).ANAEROBIC: In a study using gas chromatography to monitor substrate disappearance, 1,1,1-tris(hydroxymethyl)ethane, at an initial concentration of 50 ppm, did not biodegrade under anaerobic conditions(1). |
| Environmental Bioconcentration | An estimated BCF of 3.2 was calculated for 1,1,1-tris(hydroxymethyl)ethane(SRC), using an estimated log Kow of -0.30(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). |
| Volatilization from Water/Soil | The Henry's Law constant for 1,1,1-tris(hydroxymethyl)ethane is estimated as 1.1X10-8 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that 1,1,1-tris(hydroxymethyl)ethane is expected to be essentially nonvolatile from water surfaces(2). 1,1,1-Tris(hydroxymethyl)ethane's Henry's Law constant indicates that volatilization from moist soil surfaces is unlikely to occur(SRC). 1,1,1-Tris(hydroxymethyl)ethane is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 1.7X10-6 mm Hg(SRC), determined from a fragment constant method(3). |
| Environmental Abiotic Degradation | The rate constant for the vapor-phase reaction of 1,1,1-tris(hydroxymethyl)ethane with photochemically-produced hydroxyl radicals has been estimated as 1.3X10-11 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 30 hours at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). 1,1,1-Tris(hydroxymethyl)ethane is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(2). 1,1,1-Tris(hydroxymethyl)ethane does not contain chromophores that absorb at wavelengths >290 nm(2) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). |
| Probable Routes of Human Exposure | NIOSH (NOES Survey 1981-1983) has statistically estimated that 1090 workers were potentially exposed to 1,1,1-tris(hydroxymethyl)ethane in the US(1). Occupational exposure to 1,1,1-tris(hydroxymethyl)ethane may occur through inhalation and dermal contact with this compound at workplaces where it is produced or used(SRC). |
| Environmental Fate/Exposure Summary | 1,1,1-Tris(hydroxymethyl)ethane's production and use in the manufacture of varnishes, alkyd and polyester resins, as a conditioning agent and synthetic drying oils may result in its release to the environment through various waste streams. If released to air, an estimated vapor pressure of 1.7X10-6 mm Hg at 25 °C indicates 1,1,1-tris(hydroxymethyl)ethane will exist in both the vapor and particulate phases in the atmosphere. Vapor-phase 1,1,1-tris(hydroxymethyl)ethane will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicalsthe half-life for this reaction in air is estimated to be 30 hours. Particulate-phase 1,1,1-tris(hydroxymethyl)ethane will be removed from the atmosphere by wet or dry deposition. 1,1,1-Tris(hydroxymethyl)ethane does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight. If released to soil, 1,1,1-tris(hydroxymethyl)ethane is expected to have very high mobility based upon an estimated Koc of less than 1. Volatilization from moist soil surfaces is not expected to be an important fate process based upon an estimated Henry's Law constant of 1.1X10-8 atm-cu m/mole. 1,1,1-Tris(hydroxymethyl)ethane is unlikely to volatilize from dry soil surfaces based upon its vapor pressure. If released into water, 1,1,1-tris(hydroxymethyl)ethane is not expected to adsorb to suspended solids and sediment based upon the estimated Koc. 1,1,1-Tris(hydroxymethyl)ethane, present at 100 mg/L, reached 4 percent of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L and the Japanese MITI test, suggesting that biodegradation is not an important environmental fate process. Volatilization from water surfaces is not expected to be an important fate process based upon this compound's estimated Henry's Law constant. An estimated BCF of 3.2 suggests the potential for bioconcentration in aquatic organisms is low. Hydrolysis is not expected to be an important environmental fate process since this compound lacks functional groups that hydrolyze under environmental conditions. Occupational exposure to 1,1,1-tris(hydroxymethyl)ethane may occur through inhalation and dermal contact with this compound at workplaces where 1,1,1-tris(hydroxymethyl)ethane is produced or used. (SRC) |
| Antidote and Emergency Treatment | /SRP:/ Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Poisons A and B//SRP:/ Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if needed. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Cover skin burns with dry sterile dressings after decontamination ... . /Poisons A and B//SRP:/ Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Positive-pressure ventilation techniques with a bag valve mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Consider administering a beta agonist such as albuterol for severe bronchospasm ... . Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Watch for signs of fluid overload ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Poisons A and B/ |
| 수질 위해 등급(WGK) | 3 |
| TSCA 등재 상태 | TSCA listed |
| RTECS 번호 | TY7137500 |
| 관세 코드 | 29054910 |
| 안전 문구(S) | 22-24/25 |
| 기존화학 물질 | KE-20662 |
| F 고인화성물질 | 3 |
| 저장 분류 | 11 - Combustible Solids |
| 유해 물질 데이터 | 77-85-0(Hazardous Substances Data) |
용도
용도
1,1,1-Tris(hydroxymethyl)ethane is an intermediate in the production of alkyd and polyester resins, powder coating resins, synthetic lubricants based on polyol esters, stabilizers for plastics, plasticizers, and pigment coatings. It is used in some phase change materials.
제조 및 합성 방법
생산 방법
1,1,1-Tris(hydroxymethyl)ethane (2-hydroxymethyl-2-methyl-1,3-propanediol) is made by aldol condensation of propionaldehyde with formaldehyde, followed by reaction of the intermediate 2,2-bis(hydroxymethyl)propanal with excess formaldehyde in the presence of sodium hydroxide or lime as basic component. The resulting aqueous solution is freed from excess formaldehyde by distillation under pressure and further concentrated. The formate byproduct can be separated by extracting the trimethylolethane from the residue with organic solvents such as 2-propanol or by almost complete removal of the water and dissolving the trimethylolethane in acetone or methanol.